@tomislavtomasicwoodturning
  @tomislavtomasicwoodturning
Tomislav Tomasic Woodturning (Dodir Drva) | CLOSE UP ON HOW GOUGES CUT @tomislavtomasicwoodturning | Uploaded August 2023 | Updated October 2024, 5 hours ago.
This timber is from my last haul, it sort of looked like cedar ,but as it turns out its NORWAY MAPLE or something similar to that family...

Hope you'll enjoy

_______________________________________________

AFFILIATE LINKS

KS SCHULTE

MIDI 2 PLUS LATHE

ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=208

KS BOWL GOUGE
ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=196

CROWN BOWL GOUGE
ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=200

KS SPINDLE GOUGE
ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=201

REVOLUTION TOOL ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=209

REVOLUTION MIDI
ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=215

RAZOR EDGE BOWL GOUGE
ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=214

RAZOR EDGE SPINDLE GOUGE
ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=213

STANDARD SCRAPER
ksdrechselbedarf.idevaffiliate.com/idevaffiliate.php?id=119&url=217
______________________________________________

GURTOOL TOOLS

Bowl gouge - https://www.gurtool.cz/gurtool-pm-dutinovy-struh-bez-rukojeti-16-mm-dlouhy-nabrus/

Spindle gouge -https://www.gurtool.cz/vretenovy-struh-bez-rukojeti/

Calipers - https://www.gurtool.cz/hmatadlo/

Sanding pads - https://www.gurtool.cz/unasec/

_______________________________________________

https://www.tobi.si/en

CBN WHEEL
https://www.tobi.si/hr/CBN-brusna-ploca-200mm&tracking=644a469a6d4f4

BENCH GRINDER
https://www.tobi.si/hr/Stolna-dvostruka-brusilica&tracking=644a469a6d4f4

DIAMOND FILE
https://www.tobi.si/hr/Arbortech-diamantna-pila&tracking=644a469a6d4f4

______________________________________________


TELACK

https://www.telack.hr/shop/index.php?route=product/category&path=39_40&page=2

SANDING DISCS 75mm INDASA
https://www.telack.hr/shop/index.php?route=product/product&path=39_40&product_id=767

SANDING ROLLS INDASA

https://www.telack.hr/shop/index.php?route=product/product&path=39_40&product_id=848

Thank you very much for watching πŸ€—
CLOSE UP ON HOW GOUGES CUTIs This All You Need Lathe??? Harvey Turbo T-40Its time to retire  one of favourite toolNOT A CLICK BAIT, 2 TURNERS WILL GET TOOLS FOR FREESPECIAL WOOD that has to come down during January FULL MOON???Make profit woodturning   great little beginner projectEvery kitchen needs few of these???Everyone has its favourite thing to make, THIS IS MINE25 cuts to make beautiful bowl with NASTY FLAWWoodturning wooden pot from rippled ashUsing bowl scrapers without catches.How to roll a burr/hook on your scrapers with SCREWDRIVER

CLOSE UP ON HOW GOUGES CUT @tomislavtomasicwoodturning

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER