Clim robot Andador from Spain Rotate-o-matic head spinner with two cracked gears. @Robothut

Uploaded July 2026 | Updated September 2026, 1 hour ago

After the video, I was able to move the long ramp sequencer gear up so that it would operate without jamming. But being split at some point it will 100% fail. The cracked gear in the leg crank drive is a non-standard large diameter 12 tooth gear, because it is cracked it jams up every rotation. A replacement gear will have to be found or made to
bring the walking and arm movement back to life.

Link to 100 % operating robot Andador can be found here. with 3d printed leg crank gear.
youtu.be/PXi5SlsxMjQ

Hit the LIKE button so I know you care.
SUB for more vintage robot fun.
Explore the Robothut channel for over 1700 videos.

Clim robot Andador from Spain Rotate-o-matic head spinner with two cracked gears.

3d printed electric bi ped walking Gyro Bot Build Part 2

Robothuts DIY 7-foot-tall walking talking robots on Tracy & Company Seattle TV show 1989.

Obstacle avoidance using inexpensive IR and H bridge modules. #3dmodel #toys

Demo of 1950s Radicon Buss with DIY Cohere detector tube.

Part 3. E.C.E. external combustion engine. Walking robot, Sterling motor test 1.

Lets talk about the 3d printed Smoking POGOT robot ultrasonic mist project.

Part 3 of You can make the Star Trek next Gen Medical device.

3d print a simple 4 leg walking robot type 1 for your custom project. Use any TT gearmotor speed.

Demo of M27 Explorer build with door opening function, moving Robots, Antenna & flashing lights.

3d printed E.C.E. Sterling engine Hexapod robot test run.

Build video for 3d printed M27 Explorer project.