Uploaded November 2019 | Updated November 2026, 2 days ago
Please only do this if your mouse is so bad you are going to buy a new one. Be very careful applying the oil. I would only deposit a little droplet of oil at a time and test as you go.
This also fixed my middle mouse button and I'm not sure why.
I used tri-flow (teflon based lubricant, mostly volatile, with precise applicator) and 99.9% isopropyl alcohol. The oil dissolves the gunk without evaporating too fast, and the alcohol dissolves the oil-gunk mixture so that it can be pulled into a paper towel, then evaporate quickly. These liquids are unlikely to dissolve much salt and end up depositing the salt on electronics. I then used a vacuum cleaner to pull out any remaining fibers.
A video showing disassembly of a similar mouse wheel - this is what I wanted to avoid.
youtube.com/watch?v=BwyTJaVsxvA
Please only do this if your mouse is so bad you are going to buy a new one. Be very careful applying the oil. I would only deposit a little droplet of oil at a time and test as you go.
This also fixed my middle mouse button and I'm not sure why.
I used tri-flow (teflon based lubricant, mostly volatile, with precise applicator) and 99.9% isopropyl alcohol. The oil dissolves the gunk without evaporating too fast, and the alcohol dissolves the oil-gunk mixture so that it can be pulled into a paper towel, then evaporate quickly. These liquids are unlikely to dissolve much salt and end up depositing the salt on electronics. I then used a vacuum cleaner to pull out any remaining fibers.
A video showing disassembly of a similar mouse wheel - this is what I wanted to avoid.
youtube.com/watch?v=BwyTJaVsxvA


![Fastest 1-Core Birch Tree Farm [3GT] - Collab with Comet107 (125k logs/hr) (and challenge!) 1.15+
Uses two instant dual-edge zero tick generators, with variable block event delay, for the main log pushers. The log pushers are columns of pistons pushing perpendicularly to each other to push the logs out. There is no room for error in timing on the various parts. The sapling collection is probably incomplete, but I am pretty sure enough leaves are crushed. My challenge to whoever is interested, is to make this farm fully working (send me a message on discord.. Im on prototech and scicraft). I may come back to it sometime, but I am done with it for now.
3GT was not possible before 1.15 (correction from landmining - it sort-of was, just not for the full tree). In those previous versions, the birch sapling growth would be blocked by the piston arrangement needed to do 3GT. Those versions, to my knowledge, needed some very complex zero tick double piston extenders. This is more of a proof of concept.
Fastest is a bold claim to make and its understandable if people take issue with that. I only make this claim among single-core farms. If you know of a faster (or any other) 3GT single core birch farm, please send me a link or the title of a video, cause the fastest I can find is 4GT. Offhand bonemealing and fast clicking are not generally used, and maybe this is a new category of tree farms, but Id say lets keep it interesting and maybe a little easier. I would love to see the tree farm veterans try their hand when dispensers are not needed.
Note: this is probably directional and possibly positional (thanks vktec for pointing this out). Seriously I would NOT build this in survival despite the apparent simplicity. It uses excessive amounts of bonemeal and a lot of hard to place hopper minecarts for sapling return.
World download. This might be directional or positional. Note when running, some moving blocks may not show, since minecraft seems to assume piston movements slower than what I use. https://mega.nz/file/h15BhYzB#ZmxSLhqEIldXHhcoQ9rGp6oiU7Ia_RMmtCv5V_o5zaw
Comet107 channel: https://www.youtube.com/channel/UC-j_Tbo0d8Pbh2X2-sUvR7A . And seriously this guy is extremely smart.
ilmango tutorial on zero tick generation: https://www.youtube.com/watch?v=kBM7I6D59gI
ilmango early video on birch farm: https://www.youtube.com/watch?v=lSD4ZKVLfNM
TT who has done some insane tree farms: https://www.youtube.com/watch?v=mhXN2PAWIk8
Activation, who inspired me to look at zero ticks: https://www.youtube.com/channel/UCZ840B5e4jmSNLr3QtZEv3w
Also thanks to Major for fast hosting on Enigma and MysteryMan
Resource pack for redstone is 1.15.x_iRed_default_v0.02e.zip by LapisDemon Fastest 1-Core Birch Tree Farm [3GT] - Collab with Comet107 (125k logs/hr) (and challenge!) 1.15+](https://i.ytimg.com/vi/3RIjh1pQRXc/mqdefault.jpg)





![Minecraft autohotkey script for farmer trading (tested in 1.13)
Logicalgeekboy automatic potato/carrot farm (1.13)
https://www.youtube.com/watch?v=nKmQ93W8FN8
Scicraft tour by Docm77 where AHK trading is described
https://youtu.be/YU-E2ItBB0w?t=1589
Axe command (version 1.13, not good for other versions):
/give @a diamond_axe{Enchantments:[{id:sharpness,lvl:75}]} 1
Autohotkey:
https://autohotkey.com/download/
Autohotkey script. Paste into a .ahk file. :
; Author: Techman88
; Configured for 1920x1080, maximized window, GUI scale auto (4).
; With different settings you will probably have to adjust pixel positions.
^!s:: ; Hotkey: ctrl-alt-S
if(WinActive(Minecraft 1.13.1))
{
MouseGetPos x, y ; back up original mouse position
SetMouseDelay, 0, Play
SetDefaultMouseSpeed, 0 ; Mouse movements much quicker. Minecraft seems to be fine with this.
Click ; Click on item mouse is over, picking up whole stack
Click, 800, 460 ; click on stuff to sell slot
Send +{Click, 1120, 460} ; shift-click on emeralds
Send +{Click, 800, 460} ; shift-click on stuff to sell slot to place extra items back in inventory
MouseMove %x%, %y% ; move mouse back to original position
Send {Ctrl Down}{Alt Down} ; the Send + command seems to send keyups for ctrl and alt, so restore them
}
Return Minecraft autohotkey script for farmer trading (tested in 1.13)](https://i.ytimg.com/vi/9PF3YT753WY/mqdefault.jpg)

