Cleaning and Building a Match Set of Fuel Injectors @martinbuilt
Cleaning and Building a Match Set of Fuel Injectors  @martinbuilt
Uploaded April 2022 | Updated November 2026, 3 hours ago
Using a Fuel Injector Cleaner and Tester I'll show you how I build a matching set of fuel injectors.
I'll also show you how I can get injectors looking like new again. And a little trick to getting stuck injectors to work again.

Some of these links go to websites and some are affiliate links (including Amazon) where I'll earn a small commission if you make a purchase at no additional cost to you. This helps me to continue to make videos like this. Thank you for your support!

Amazon Affiliate
Professional Ultrasonic Cleaner amzn.to/3E12aZ2
Fuel Injector Cleaner and Tester amzn.to/3KwEi1Q
Ultrasonic Cleaner Solution amzn.to/3uoOUtW
Fuel Injector Filter Basket Removal Tool amzn.to/2XPN4AA
8 Fuel Injector Seal Kit, 1 Pack amzn.to/2UbAU49
Universal 12mm x 6mm Fuel Injector Micro Filter Basket Pack of 50 amzn.to/2XwiXQ2
Lyman Brass Tapper Hammer amzn.to/2XwKAbH
Gumout Carb and Choke Cleaner, 16 oz. amzn.to/2Ua9N9M

Donate to Help Support Channel paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Q7WCDR84D2VDC&source=url

Facebook facebook.com/Martinbuilt-2351766611763181

Disclaimer:
FYI if you click any of the product links above and end up purchasing anything, I MAY get paid a small commission at no extra charge to you. This is one of the ways you can support the channel. Your support helps me bring out more content for all of you. Martinbuilt assumes no liability for property damage or injury is incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not Martinbuilt. Martinbuilt can not guarantee against improper use or unauthorized modifications of this information.
#fuelinjectors
Cleaning and Building a Match Set of Fuel InjectorsHow to Build Cylinder Head Stands (V-Style Head Holder)What Ive Been Working on Over Presidents Day WeekendHow to Install a Battery Disconnect SwitchMy neighbor pulls up in a gyro copter to help me out.How to Change Axle Fluid (99-04 Jeep Grand Cherokee WJ)Harbor Freight Interlocking Wall Mount Tilt BinsConverting a Chambered Muffler into a Straight Through MufflerRemove & Replace Harmonic Balancer 3.7 & 4.7 Chrysler Jeep Dodge & MitsubishiHow to Replace a Water Pump on a Dodge, Jeep & Chrysler 3.7, 4.7LHow to Replace Upper Ball Joints on a Dodge Dakota & DurangoHow to Fuel Tank Tuck a 99-04 Jeep Grand Cherokee WJ Part 1
martinbuilt |

Cleaning and Building a Match Set of Fuel Injectors

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER