Cleanest Bambu Lab Printing Setup Yet? Or Just Dangerous? @leckiestein

Uploaded August 2025 | Updated September 2026, 3 hours ago

After weeks of tinkering, here’s the first look at my new wall-mounted 3D printer setup built around Bambu Lab machines. It's space-saving, expandable, and super clean… but is it pushing the structural limits of the wall?

Wall-mounted printers, suspended AMS units, and no rack legs in sight.. would you build yours like this?

⚡ #3DPrinting #BambuLab #Leckiestein #WorkshopSetup #PrinterFarm

Cleanest Bambu Lab Printing Setup Yet? Or Just Dangerous?

The Ultimate Wiper Mod Combo For Your Bambu Lab P1S P1P and X1C

The Bambu Lab P1S IS FAST! This Thing Can Move! Nozzle wiper Mod Update #bambulab

Using SteinWipe Presets with Non-0.4mm Nozzles for Bambu Lab Printers

Cheat Codes For Bambu Lab Printers? Its Real!

This Mod Fixes Print Blobs For Bambu Lab P1S P2S X1C. Is The Price Paid In Wear?

This Trick For Your DJI Mic Might Save You in a Pinch!

Insane Bambu Mod! 15 Second Startup Speed For P1S and X1C!

Purge Mod! Using SWMC for Bambu P1S and X1C

Is Your Bambu Printer Suffering From Dirty Poops? Try This! #bambulab #3dprinting

$Try This 3D Printer Nozzle Brush! Its Oddly Satisfying For The Bambu Lab P1S! If youre looking to mod your machines start up routine, you should know if not done correctly you can do a lot of damage to your printer! So only add this code if youre comfortable with editing G-code files. Liability Disclaimer: The machine code provided in this video is for educational and informational purposes only. By using or modifying this code, you agree to take full responsibility for any outcomes, including damage to equipment, property, or injury. Leckiestein assumes no liability for errors, malfunctions, or misuse of this code and does not provide any warranty, express or implied, regarding its accuracy, functionality, or suitability for any purpose. Stock code: ; wipe nozzle M1002 gcode_claim_action : 14 M975 S1 M106 S255 G1 X65 Y230 F18000 G1 Y264 F6000 M109 S{nozzle_temperature_initial_layer[initial_extruder]-20} G1 X100 F18000 ; first wipe mouth G0 X135 Y253 F20000 ; move to exposed steel surface edge G28 Z P0 T300; home z with low precision,permit 300deg temperature G29.2 S0 ; turn off ABL G0 Z5 F20000 Edited code: ; wipe nozzle M1002 gcode_claim_action : 14 M975 S1 M106 S255 G1 X65 Y230 F18000 G1 Y264 F6000 M109 S{nozzle_temperature_initial_layer[initial_extruder]-20} G1 X100 F18000 ; first wipe mouth G0 X135 Y253 F20000 ; move to exposed steel surface edge G28 Z P0 T300; home z with low precision, permit 300deg temperature G29.2 S0 ; turn off ABL G0 X127 Y0 Z80 F42000 ; Move to manual cleaning pos. M400 S15 ; wait here while manual cleaning G0 X135 Y253 Z5 ; return back G0 F20000 ; reset speed$