Cisco ASA Basic Troubleshooting Commands @Liv4IT
Cisco ASA Basic Troubleshooting Commands  @Liv4IT
Uploaded March 2024 | Updated September 2026, 2 weeks ago
Cisco ASA Basic Troubleshooting Commands

In this video, I will show you a collection of the basic commands that you have to know or you will not be able to manage your Cisco ASA device.
so we will see commands to:

- Check the basic settings and firewall states
- Check the system status:
To see the actual software version, operational mode, HA, etc and the system time.
- Check the hardware performance:
To see what is the state of the cpu and the memory
- Check the session table of the firewall:
The values from the session table of the firewall
You can filter to the session that you looking for
- Check the interface settings:
Check the traffic on interfaces, the packet and byte counters.
Show the running config only for the interfaces with ip address
Show ip address and security level
- Check the state, speed and duplexity an IP of the interfaces:
Here you can see following in the output
Interface name
MAC
Link state
Speed
Duplex
MTU
Packet and Byte counters
Errors
- Check the ARP Table:
This contains the permanent and the dynamic ARP entries
- Check the Routing Table:
With the show route you can see the actual routing table from the firewall with the statis and the dynamic routes and the directly connected networks.










๐ŸŒธ Support channel & make donation :
paypal.me/aminenina/10

๐ŸŒธ Subscribe for more videos :
Youtube: youtube.com/user/aminosninatos

๐ŸŒธ Follow me On Social Media
Facebook : facebook.com/aminosninatos

***********************************************************************
๐ŸŒธ Cisco ASA TCP Connection Flags Explained
youtu.be/tVTvj9yTLE4

๐ŸŒธ Cisco ASA Firewall Packet Tracer for Network Troubleshooting
youtu.be/8mslCS0YtpM

๐ŸŒธ How to execute Linux Commands on Cisco IOS
youtu.be/UUOGlQV8tkc

๐ŸŒธ How to configure AAA authentication on Cisco IOS
youtu.be/G53pryslQU4

๐ŸŒธ How to protect Cisco devices against DoS attacks
youtu.be/WdfGtKybbBs

๐ŸŒธ How To protect Cisco Devices against CDP Flood Attack
youtu.be/Lo5pc9YIx8I

๐ŸŒธ How to prevent SNMP Attack on Cisco IOS devices
youtu.be/eUKg61LHaYE

๐ŸŒธ How to protect Cisco Devices against HSRP Attack
youtu.be/chYA34pZKHg

๐ŸŒธ How to protect Cisco Devices against DHCP Denial of service
youtu.be/kpaV4HeENVs

๐ŸŒธ How to protect Cisco Devices against ARP poisoning attack
youtu.be/RumltKoDOdc

๐ŸŒธ How to protect Cisco Devices against Vlan Hopping Attack
youtu.be/hPYfHeAmuy0

๐ŸŒธHow to protect Cisco Devices against SSH brute force attack
youtu.be/w7VW3dzRBdQ

๐ŸŒธ What ia the difference between Cisco IOS and IOS XR
youtu.be/YmH7mxj2jmQ

๐ŸŒธ How to exploit Cisco Router using RouterSploit Framework
youtu.be/OIqIKImSDnE

๐ŸŒธ How to pentest Cisco Devices using cisco-torch tool
youtu.be/wkK36x6hp_I

๐ŸŒธ How to exploit Cisco Devices TFTP Server
youtu.be/xf0ZCrHTIIU

๐ŸŒธ How to exploit Cisco Devices SNMP using Kali Linux
youtu.be/EJATBkEyHAQ

๐ŸŒธCisco configuration Archive & Rollback Feature
youtu.be/7QHRfz4Eiko
***********************************************************************
#cisco#asa#troubleshooting
Cisco ASA Basic Troubleshooting CommandsHow To Upgrade Proxmox VE 8 To Version 9Proxmox Install ProxMenux MonitorHow To Install SublimeText 3 on WindowsHow To Upgrade Proxmox Host to version 8 .1How to Install Pi hole on ProxmoxSetup A Secure Remote Access VPN On OPNsense With OpenVPNHow To Optimize Proxmox Backups by Reducing The Backup FileSizeHow To Configure WireGuard On pfSense 2.8.0Upgrading from Proxmox 8.1 to 8.2How To Detect Active Directory Threats Using SplunkHow to Configure Vlans on Juniper MX Router
Liv4IT |

Cisco ASA Basic Troubleshooting Commands

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER