Uploaded April 2020 | Updated November 2026, 5 days ago
In a previous video I showed the results of getting some custom carbon cut at Flynoceros for a 3" Caddx Vista design. As that experience went well I was curious to try the services of Armattan Productions to see how a similar frame turned out.
mini micro FPV MM3 Bottom Plate
armattanproductions.com/pages/product_details/24283
mini micro FPV MM3 Top Plate
armattanproductions.com/pages/product_details/24284
Required to complete:
3D-printed TPU camera mount
thingiverse.com/thing:4290165
4x 23mm M2 stand-offs
4x 25mm M2 bolts for flight stack
4x M2 (locking) nuts for stack
4x M2 nuts
8x M2x6 for frame
8x M2x4 motor screws
8x small zip-ties
2x 5mm heat-shrink tubing
1x rubberized velcro strap (approx 10mm x 120mm)
Electronics used in this build:
HGLRC Zeus35 AIO
Caddx Vista
Airblade 1404 3850kV brushless motors
Gemfan 3028 tri-blades
GNB 4S 520mAH HV LiPo
FrSky XM+
FrSky X9 Lite
DJI Goggles
In a previous video I showed the results of getting some custom carbon cut at Flynoceros for a 3" Caddx Vista design. As that experience went well I was curious to try the services of Armattan Productions to see how a similar frame turned out.
mini micro FPV MM3 Bottom Plate
armattanproductions.com/pages/product_details/24283
mini micro FPV MM3 Top Plate
armattanproductions.com/pages/product_details/24284
Required to complete:
3D-printed TPU camera mount
thingiverse.com/thing:4290165
4x 23mm M2 stand-offs
4x 25mm M2 bolts for flight stack
4x M2 (locking) nuts for stack
4x M2 nuts
8x M2x6 for frame
8x M2x4 motor screws
8x small zip-ties
2x 5mm heat-shrink tubing
1x rubberized velcro strap (approx 10mm x 120mm)
Electronics used in this build:
HGLRC Zeus35 AIO
Caddx Vista
Airblade 1404 3850kV brushless motors
Gemfan 3028 tri-blades
GNB 4S 520mAH HV LiPo
FrSky XM+
FrSky X9 Lite
DJI Goggles










