Wesley Treat | Cheap & Easy T-Slot Waste Board for the X-Carve CNC Router @WesleyTreat | Uploaded November 2017 | Updated October 2024, 1 hour ago.
I've finally gotten a chance to put together my X-Carve CNC router and I'm starting with a simple, DIY T-slot waste board.
GET YOUR VERY OWN X-CARVE!
Use the link inventables.com/?ref=wtreat for your purchase and help me to keep making videos!
Instagram: instagram.com/wesley_treat
Amazon: amazon.com/shop/wesleytreat
Etsy: satelluxe.etsy.com & satelluxestudio.etsy.com
TOOLS FEATURED IN THIS VIDEO
▶ Rockler T-Slot Cutter Router Bit: amzn.to/2z9bVoq
▶ Rockler 3/8" Diameter Straight Router Bit: amzn.to/2z9VTKU
▶ Dust Right Universal Small Port Hose Kit: amzn.to/2zWxhTb
▶ Pentel Side FX Mechanical Pencil: amzn.to/2xHo1BB
▶ Bosch Plunge and Fixed Base Router Kit: amzn.to/2gyZ1TE
▶ 3M Half Facepiece Silicone Respirator: amzn.to/2jcqkZk
▶ 3M 2091 P100 Particulate Filter: amzn.to/2kHTehr
▶ 1/4-20 T-bolts, 2-1/2" Long: amzn.to/2AaVPZF
OTHER NOTES
▶ The first set of slots that I screwed up would have
worked fine, but because my spacing was off, they interfered with the placement of the mounting holes. That's the only reason I remade it.
▶ Why didn't I have the CNC cut the slots for me? The waste board is larger than the cutting area of the machine. There's no way to cut all the way to the edge.
▶ Here's the information on making your own waste board for the 1000mm X-Carve: goo.gl/vA822E.
I've finally gotten a chance to put together my X-Carve CNC router and I'm starting with a simple, DIY T-slot waste board.
GET YOUR VERY OWN X-CARVE!
Use the link inventables.com/?ref=wtreat for your purchase and help me to keep making videos!
Instagram: instagram.com/wesley_treat
Amazon: amazon.com/shop/wesleytreat
Etsy: satelluxe.etsy.com & satelluxestudio.etsy.com
TOOLS FEATURED IN THIS VIDEO
▶ Rockler T-Slot Cutter Router Bit: amzn.to/2z9bVoq
▶ Rockler 3/8" Diameter Straight Router Bit: amzn.to/2z9VTKU
▶ Dust Right Universal Small Port Hose Kit: amzn.to/2zWxhTb
▶ Pentel Side FX Mechanical Pencil: amzn.to/2xHo1BB
▶ Bosch Plunge and Fixed Base Router Kit: amzn.to/2gyZ1TE
▶ 3M Half Facepiece Silicone Respirator: amzn.to/2jcqkZk
▶ 3M 2091 P100 Particulate Filter: amzn.to/2kHTehr
▶ 1/4-20 T-bolts, 2-1/2" Long: amzn.to/2AaVPZF
OTHER NOTES
▶ The first set of slots that I screwed up would have
worked fine, but because my spacing was off, they interfered with the placement of the mounting holes. That's the only reason I remade it.
▶ Why didn't I have the CNC cut the slots for me? The waste board is larger than the cutting area of the machine. There's no way to cut all the way to the edge.
▶ Here's the information on making your own waste board for the 1000mm X-Carve: goo.gl/vA822E.