Uploaded May 2012 | Updated September 2026, 1 week ago
Working on the "Mr clean" car coil system and the flat kacher from "Dragon"
, i try an approach to get a working "charging by induction " system.
So as per my previous video, i use a progressive charging cap up to a point when the voltage is high enough to fire the device.
For my previous video it was a flashing LED which probably has a cap inside , and which provided a nice "trumpet or carrot " wave. But the wave was not a very nice sine wave but more a peaky wave.
And now i tried with a Kacher, ( as per Dragon video and replicated by Kajunkreation and me )
But this time i focus on the battery.
It seems that the battery get a very strong excitation from the Kacher circuitery, and further more the battery is able to transmit this excitation to a neighbour copper plate
Or better sayd a large copper plate is able to capture the energy coming from the excited battery
Than we can transform this energy to produce some work.
In this case a big spark by using a MO HV cap ,a spark gap and a car coil
What is very interesting is that the sine wave increases up to be enough to fire the spark.
And if i touch the copper plate the sine wave is always there but not strong enough to fire the spark. Thers is no incrementation.
Finally if i disconnect the output of the Kacher from the ground, the system become very weak. And is no more able to increase trhe sine wave in the trumpet form up to fire the spark.
youp hope this helps
good luck at all
Laurent
.
Working on the "Mr clean" car coil system and the flat kacher from "Dragon"
, i try an approach to get a working "charging by induction " system.
So as per my previous video, i use a progressive charging cap up to a point when the voltage is high enough to fire the device.
For my previous video it was a flashing LED which probably has a cap inside , and which provided a nice "trumpet or carrot " wave. But the wave was not a very nice sine wave but more a peaky wave.
And now i tried with a Kacher, ( as per Dragon video and replicated by Kajunkreation and me )
But this time i focus on the battery.
It seems that the battery get a very strong excitation from the Kacher circuitery, and further more the battery is able to transmit this excitation to a neighbour copper plate
Or better sayd a large copper plate is able to capture the energy coming from the excited battery
Than we can transform this energy to produce some work.
In this case a big spark by using a MO HV cap ,a spark gap and a car coil
What is very interesting is that the sine wave increases up to be enough to fire the spark.
And if i touch the copper plate the sine wave is always there but not strong enough to fire the spark. Thers is no incrementation.
Finally if i disconnect the output of the Kacher from the ground, the system become very weak. And is no more able to increase trhe sine wave in the trumpet form up to fire the spark.
youp hope this helps
good luck at all
Laurent
.
