Uploaded June 2021 | Updated November 2026, 2 days ago
Swapping out the linear Cherry MX red switches in a wireless Corsair K63 keyboard in favour of some Gateron Brown switches that offer a slight tactile bump to the keystroke. Absolute pants compared with tactile ALPS switches or the legendary IBM buckling spring but it's better than nothing.
I had to de-solder 4 contacts on each switch and there are about 90 switches, which also had to be re-soldered... you can imagine that it got very tedious after not a very long time indeed lol.
The escape key is a Kailh Speed Bronze which is a clicky switch that uses a clickbar which I was going to do the whole board in but were too noisy for what I wanted and also the "click" was not at the same point at which the switch actuates...
Swapping out the linear Cherry MX red switches in a wireless Corsair K63 keyboard in favour of some Gateron Brown switches that offer a slight tactile bump to the keystroke. Absolute pants compared with tactile ALPS switches or the legendary IBM buckling spring but it's better than nothing.
I had to de-solder 4 contacts on each switch and there are about 90 switches, which also had to be re-soldered... you can imagine that it got very tedious after not a very long time indeed lol.
The escape key is a Kailh Speed Bronze which is a clicky switch that uses a clickbar which I was going to do the whole board in but were too noisy for what I wanted and also the "click" was not at the same point at which the switch actuates...










