Uploaded April 2022 | Updated November 2026, 5 days ago
In this video, Dr. Joel Dunsmore demonstrates Keysight's Channel Quality/Group Delay X-Series measurement application. Dr. Dunsmore uses the application to measure the gain and group delay of a wideband filter using a VXG signal generator to generate the multi-tone signals and then uses a UXA signal analyzer as a receiver to determine the gain, phase and delay from the measured multi-tone signal. Dr. Dunsmore also compares the measurement results with the traditional method using a PNA network analyzer and demonstrates that the results are closely matched.
To download the software referred to in this video and get a 30-day trial license, click the link below.
edaapps.software.keysight.com/cgi-bin/pathwave-tes-video/download-request.cgi?id=100009019
• N9056EM0E Channel Quality/Group Delay Measurement Application:
keysight.com/products/n9056em0e
• X-Series RF and Microwave Signal Generator (MXG/EXG):
keysight.com/find/x-series_sg
• Dual-channel mmWave Signal Generator M9384B VXG:
keysight.com/find/vxg
• X-Series Signal Analyzers (UXA/PXA/MXA):
keysight.com/find/x-series_sa
• PNA Network Analyzer:
keysight.com/find/pna
• Keysight RF Test Application Videos on YouTube:
youtube.com/playlist?list=PLtq84kH8xZ9HNxCmJ3HcXan2l4Wkv3PUH
In this video, Dr. Joel Dunsmore demonstrates Keysight's Channel Quality/Group Delay X-Series measurement application. Dr. Dunsmore uses the application to measure the gain and group delay of a wideband filter using a VXG signal generator to generate the multi-tone signals and then uses a UXA signal analyzer as a receiver to determine the gain, phase and delay from the measured multi-tone signal. Dr. Dunsmore also compares the measurement results with the traditional method using a PNA network analyzer and demonstrates that the results are closely matched.
To download the software referred to in this video and get a 30-day trial license, click the link below.
edaapps.software.keysight.com/cgi-bin/pathwave-tes-video/download-request.cgi?id=100009019
• N9056EM0E Channel Quality/Group Delay Measurement Application:
keysight.com/products/n9056em0e
• X-Series RF and Microwave Signal Generator (MXG/EXG):
keysight.com/find/x-series_sg
• Dual-channel mmWave Signal Generator M9384B VXG:
keysight.com/find/vxg
• X-Series Signal Analyzers (UXA/PXA/MXA):
keysight.com/find/x-series_sa
• PNA Network Analyzer:
keysight.com/find/pna
• Keysight RF Test Application Videos on YouTube:
youtube.com/playlist?list=PLtq84kH8xZ9HNxCmJ3HcXan2l4Wkv3PUH










![[7] EP-Scan for PI Applications
Ensure reliable power delivery network (PDN) design by analyzing DC IR-drop during the layout phase, improving power integrity visibility.
By the end of this session, PCB designers can:
- Create and configure power delivery networks
- Define sources and sinks with voltage and current conditions
- Evaluate voltage limits using pass/fail criteria
- Analyze DC IR-drops across the power network
- Visualize current density and voltage distribution
- Identify high current paths and potential hotspots
EP-Scan 2026 Download Page:
https://www.keysight.com/find/ep-scan-downloads
Apply for a Free Trial:
https://edaapps.software.keysight.com
Watch full EP‑Scan playlist:
https://www.youtube.com/playlist?list=PLtq84kH8xZ9G1mJrSbCQkSDGoqqiq7F0s
Reference layouts used in this playlist:
Download from Keysight EDA: https://www.keysight.com/us/en/assets/9926-01485/miscellaneous/reference-layout-EP-Scan-Introduction.zip [7] EP-Scan for PI Applications](https://i.ytimg.com/vi/VYxShR38hOs/mqdefault.jpg)