Change Amplifier V1 tube to 5751 from 12AX7 | Get Clean Tones 30% gain drop | reviewed with audio @tonymckenzieofficial
Change Amplifier V1 tube to 5751 from 12AX7 | Get Clean Tones 30% gain drop | reviewed with audio  @tonymckenzieofficial
Uploaded March 2020 | Updated September 2026, 2 weeks ago
How to: Often with a tube amp you might wish that the actual amplifier had less gain. Yes really. But in these days of incredibly high gain levels on tube amps with as many as seven or eight pre-amplifier tubes in your amp how would you do that?

Don't forget to thumbs up, subscribe and ring that bell :)

Well there's a simple answer that anyone could do! Firstly you have to check if you have a 12AX7 tube in the first pre-amp socket and if you do then your luck is surely in for today. Simply buy a 5751 tube, remove the 12AX7 tube, fit the 5751 and you have instantly reduced the gain that the pre-amp can produce! The 5751 has 30% LESS gain than the 12AX7!

Get advice and answers for questions like:

Why change my 12AX7 for a 5751?
What special tools do I need?
Is it safe?
Does this procedure apply to any amp?
Why does it matter?
Will this preamp tube change the sound of the amp?
Was I paid to review any of this content?
So it's that easy?

In this video I compare the 12AX7 tube against a 5751 in two identical amplifiers... both Bogner Brixton amps set on exactly the same settings.

Check for yourself which one is 'best' and tell me in the posts below.

Visit tonymckenzie.com for other non YouTube reviews of musical equipment, and of course my YouTube channel with at least 300+ reviews online right now! I buy all of the equipment and my reviews are not sponsored by third parties so you get a review that will always 'tell it the way it is' about all reviewed equipment and my personal opinion whether the equipment lives up to the hype often thrown about in many other reviews.

PLEASE SUBSCRIBE AND RING THE BELL. And if you like the video then thumbs up! Thanks - its always appreciated and I won't bombard you with reviews!

(c) 1997-2020 A B Mckenzie & tonymckenzie.com
All Rights Reserved. All Trademarks Acknowledged.
Change Amplifier V1 tube to 5751 from 12AX7 | Get Clean Tones 30% gain drop | reviewed with audioThis simulator review is no longer available because of harassment and threats.Bandmate Reunion Dave Owen Tony Mckenzie Interview Radio Shopper in the 90sCreative Labs Sound Blaster X5 Headphone Amp | Any good?A Quality Soft Strap for Guitar & Bass | Review of Multi-Use Guitar & Bass Strap & Unique FeaturesThe Strat Guitar Neck That Could Change Everything | Close up Install  | Playing | Tone ExamplesWhats Wrong With This Bigfoot Pedal? for Mesa BoogieFloyd Rose FRX Whammy Unit? is it really any good?Why its time to take a look at the Axe FX III effects unit | From the Inside and Out | Tony MckenzieWhich Guitar Neck would YOU choose? Fender or WarmothLegendary Tones Mr. Scary George Lynch Tube Amp Mod | Can this amp mod REALLY add Lynch tone?Kemper Player Exposed: What You Need to Know
tonymckenziecom |

Change Amplifier V1 tube to 5751 from 12AX7 | Get Clean Tones 30% gain drop | reviewed with audio

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER