Uploaded May 2024 | Updated September 2026, 2 hours ago
You can download the STL and SCAD files here...
github.com/movievertigo/CERBERUS2100/tree/main/Case
To secure the PCB to the case you will need five M2.5x6mm bolts and nuts.
The case was designed in OpenSCAD and positions, sizes and tolerances can be tweaked easily in there if necessary.
* The sizes and positions of the various holes are defined at the top of the file and should be fairly self explanatory.
* Longer than 6mm M2.5 bolts can be used if you increase "UnderBoardGap" in the SCAD file to compensate.
* By default the design has a large gap for the CAT programmer to attach on the right hand side of the board. If you don't use this and wish to remove the hole, you can set EnableCAT to zero
* Currently the lid fits quite snugly to the case. If you want a looser fit, you can tweak LidRunnerExpansion and LidRunnerTopExpansion.
Music: purple-planet.com
You can download the STL and SCAD files here...
github.com/movievertigo/CERBERUS2100/tree/main/Case
To secure the PCB to the case you will need five M2.5x6mm bolts and nuts.
The case was designed in OpenSCAD and positions, sizes and tolerances can be tweaked easily in there if necessary.
* The sizes and positions of the various holes are defined at the top of the file and should be fairly self explanatory.
* Longer than 6mm M2.5 bolts can be used if you increase "UnderBoardGap" in the SCAD file to compensate.
* By default the design has a large gap for the CAT programmer to attach on the right hand side of the board. If you don't use this and wish to remove the hole, you can set EnableCAT to zero
* Currently the lid fits quite snugly to the case. If you want a looser fit, you can tweak LidRunnerExpansion and LidRunnerTopExpansion.
Music: purple-planet.com
