Uploaded September 2018 | Updated September 2026, 2 hours ago
He is also considering using the printed walls themselves as a decorative element for both the interior and exterior of the printed home.
“With a good quality, there will be very little need for sheetrocking of the wall surfaces,” he explained.
Rudenko has built it based on the RepRap project, an open source 3D printing project that is extremely popular among 3D printing enthusiasts. For those familiar with RepRap printers, it’s comparable to a really big Mendel with the same Arduino Mega 2560 board, larger motors, and the same software/firmware chain.
Source: 3dprint.com/2471/3d-printed-home-in-minnesota
He is also considering using the printed walls themselves as a decorative element for both the interior and exterior of the printed home.
“With a good quality, there will be very little need for sheetrocking of the wall surfaces,” he explained.
Rudenko has built it based on the RepRap project, an open source 3D printing project that is extremely popular among 3D printing enthusiasts. For those familiar with RepRap printers, it’s comparable to a really big Mendel with the same Arduino Mega 2560 board, larger motors, and the same software/firmware chain.
Source: 3dprint.com/2471/3d-printed-home-in-minnesota
