Uploaded January 2013 | Updated November 2026, 4 days ago
In this video you can see my prototype circuit to cut the load using the cell-log alarm port. When the threshold voltage is reached the alarm port closes the circuit and the mosfet opens the circuit.
I used a 12v 50W light bulb as load.
The battery is a 5s4p 18.5v 6Ah li-mn.
The alarm is set to go off if any cell goes under 3.79v. You can see the light bulb flashing as the alarm start going off. This is due to the fact that the voltage of cells goes up once the load is cut.
The alarm(s) can be set to go off to any value within the cell-log specs.
A big "Thank you!" to my friend Adriano for helping me out with the circuit.
In this video you can see my prototype circuit to cut the load using the cell-log alarm port. When the threshold voltage is reached the alarm port closes the circuit and the mosfet opens the circuit.
I used a 12v 50W light bulb as load.
The battery is a 5s4p 18.5v 6Ah li-mn.
The alarm is set to go off if any cell goes under 3.79v. You can see the light bulb flashing as the alarm start going off. This is due to the fact that the voltage of cells goes up once the load is cut.
The alarm(s) can be set to go off to any value within the cell-log specs.
A big "Thank you!" to my friend Adriano for helping me out with the circuit.

