Uploaded September 2026 | Updated November 2026, 3 hours ago
00:00 - Intro
00:22 - What will we do
01:10 - Moulding process
08:45 - Filling crucible &starting up the furnace
09:47 - 5 minutes into the melt
09:58 - 10 minutes into the melt
10:20 - Adding copper to the crucible
10:48 - Molten copper
11:14 - Adding more copper
11:44 - More molten copper
12:00 - First copper pour
13:05 - Second copper pour
14:10 - Third copper pour (ingot)
14:43 - Get something cold after hot pours
15:48 - Opening the mouldinf flasks
21:11 - Showing the results
Thanks for watching!
If you liked this video, please give it a thumbs up, leave a comment and do not forget to subscribe!
Help support my channel, buy official merchandise!
teespring.com/metalscrapper
5% Discount on furnaces from ToAutoTool:
toautotoolglobal.com/collections/electric-propane-metal-melting-furnaces?sca_ref=12007032.wooJkaq0lWIE3wpC
The Furnaces I use: FB1SB Devil Forge 4kg
ToAutoTool Electric furnaces
The self made 10kg furnace I use with devil forge DFC burner: youtube.com/watch?v=XjRe3TLbt7c
The lifter tong I use: youtube.com/watch?v=MLS2xmILPrY&t=375s
I edit my videos with: Videopad video editor
Disclaimer: Please be aware that working with hot liquid metals is very dangerous! Do not try this at home if you do not exactly know what you do. I have done a lot of preparation and informed myself before I did my first pour.
If you do so, make sure to wear proper personal protection gear like a full face shield, a respirator, a dusk mask, fire retarding clothing or a leather apron, good protective and heat resistant gloves and leather boots. Make sure to work safe and use proper foundry tools.
Finally enjoy the hobby!
00:00 - Intro
00:22 - What will we do
01:10 - Moulding process
08:45 - Filling crucible &starting up the furnace
09:47 - 5 minutes into the melt
09:58 - 10 minutes into the melt
10:20 - Adding copper to the crucible
10:48 - Molten copper
11:14 - Adding more copper
11:44 - More molten copper
12:00 - First copper pour
13:05 - Second copper pour
14:10 - Third copper pour (ingot)
14:43 - Get something cold after hot pours
15:48 - Opening the mouldinf flasks
21:11 - Showing the results
Thanks for watching!
If you liked this video, please give it a thumbs up, leave a comment and do not forget to subscribe!
Help support my channel, buy official merchandise!
teespring.com/metalscrapper
5% Discount on furnaces from ToAutoTool:
toautotoolglobal.com/collections/electric-propane-metal-melting-furnaces?sca_ref=12007032.wooJkaq0lWIE3wpC
The Furnaces I use: FB1SB Devil Forge 4kg
ToAutoTool Electric furnaces
The self made 10kg furnace I use with devil forge DFC burner: youtube.com/watch?v=XjRe3TLbt7c
The lifter tong I use: youtube.com/watch?v=MLS2xmILPrY&t=375s
I edit my videos with: Videopad video editor
Disclaimer: Please be aware that working with hot liquid metals is very dangerous! Do not try this at home if you do not exactly know what you do. I have done a lot of preparation and informed myself before I did my first pour.
If you do so, make sure to wear proper personal protection gear like a full face shield, a respirator, a dusk mask, fire retarding clothing or a leather apron, good protective and heat resistant gloves and leather boots. Make sure to work safe and use proper foundry tools.
Finally enjoy the hobby!










