Casting a Bronze Halloween Pumpkin @JimsonMakes
Casting a Bronze Halloween Pumpkin  @JimsonMakes
Uploaded November 2016 | Updated November 2026, 1 day ago
In this video I make a bronze resin casting of a miniature Halloween pumpkin.
I have tried to do this with no expensive specialist equipment. It is much better you have access to a vacuum chamber to remove the air bubbles from the silicone and the resin. A pressure pot can be used to further reduce bubbles when casting.
I would normally use a polyester or polyurethane resin for this type of casting. It sets much more quickly and produces a more predictable result.
Bubbles can be filled with a spot of resin that has been heavily filled with bronze to make it very viscous, it will then stay where you put it.
The modern polyurethane casting resins are low odour and a simple 1:1 mix, they also come in black.
Bronze castings look better if the resin is black.
I made this casting hollow by rotating the mould whilst the resin set. If you wish you could back fill the inside with resin containing a less expensive filler.
Other metal powders can be used instead of bronze, such as brass, copper and aluminium. It is best to use the very fine powders produced specifically for casting.
I get most of my Mould Making and casting materials from MBFG fibre glass in Northern Ireland.
mbfg.co.uk

Disclaimer
My videos are intended to give viewers creative ideas only.
The way I work is not necessarily the best or safest way.
You and you alone are responsible for your own safety.
Working with resins can be hazardous.
Always wear gloves and eye protection, and always wear a proper respirator style dust mask. Use a chemical mask if harmful vapours are present.
Work in a well ventilated area.
Always read manufacturers instructions thoroughly and make sure you follow them.
Be safe, be creative and have fun.

My name is Jim Overton, welcome to my channel.
Thanks for watching.
Please like, share and subscribe.
Casting a Bronze Halloween PumpkinCreality Sonic Pad - Easy Klipper for the S1 ProMakers Central. Calling all makers.Testing the Sculpfun S30 Pro Max LaserWoodturning a Marbled Milliput Margin BowlWoodturning The Leftovers BowlWoodturning a Brass Brimmed Bubinga BowlTurning a Sycamore Enclosed Bowl with Milliput InlayDesigning and Printing in 3D , Shapr3D, New Filament and Nomad SculptWoodturning The Dragons Nest Night Light. Pinecone Mini EggsI Build a Crazy Custom RC Car - DHK Zombie conversionTurning a sycamore bowl with Milliput epoxy putty inlay - part 2
Jim Overton - Jimsons Stuff |

Casting a Bronze Halloween Pumpkin

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER