Uploaded June 2022 | Updated November 2026, 3 hours ago
Hear from Jeff Lowthorp, VP of Business Development at Argen as he shares his experience with adopting the Carbon® M3 printer into Argen's Digital Center.
Head over to carbon3d.com/m3 to learn more about the next generation of Carbon DLS™.
Hear from Jeff Lowthorp, VP of Business Development at Argen as he shares his experience with adopting the Carbon® M3 printer into Argen's Digital Center.
Head over to carbon3d.com/m3 to learn more about the next generation of Carbon DLS™.








![Carbon Resin - CE - Cyanate Ester
Our Cyanate Ester-based resin is a high performance material with heat deflection temperatures up to 219°C [426°F].
Learn more at Carbon3d.com
ABOUT THE DEMONSTRATION
A 3.2 mm thick bar of CE is heated to 260°C [500°F] in a forced circulation heating oven. Our prototyping resin is included as a comparison. Each bar is suspended between two anchors with a 200 gram weight on its center point. As the temperature increases, each material behaves according to its properties. The prototyping resin gradually deforms, bows and break, while the bar of CE continues to support the weight. Carbon Resin - CE - Cyanate Ester](https://i.ytimg.com/vi/s3hoq4KAtRo/mqdefault.jpg)

