Car Stalling or Rough Idle - Cleaning the IAC Valve (Idle Air Control) @TutorialGenius
Car Stalling or Rough Idle - Cleaning the IAC Valve (Idle Air Control)  @TutorialGenius
Uploaded January 2021 | Updated November 2026, 4 days ago
[Tools/Parts]
Cleaning products (Throttle body cleaner or intake valve cleaner or carb cleaner): amzn.to/4w80KWV
Brushes (Toothbrush or pipe cleaner etc): amzn.to/39nLxJ6
Optional: Ford Motorcraft CG758 IAC valve gasket (Ford Mustang 1984-2012): amzn.to/3aeuo3E
Optional: IAC Valve Assembly Ford CX1785 (Ford Mustang 2002-2004): amzn.to/4vhDxjB

[Misc Tools]
Metric Wrench Set 8mm - 22mm: amzn.to/4uINOWH
Socket Set 123pc Metric and Imperial - Good Quality: amzn.to/2NhqhL9
TEKTON 3/8 Inch Drive Extension Set, 4-Piece (1, 3, 6, 10 in.): amzn.to/4mrrsW6

Part Numbers:
CG758, E83Z9F670A, G31324, E7TZ9F670A
AC568, 2R3Z9F715EA, XR3Z9F715BA
CX1785, 2R3E9F715AA, 2R3Z9F715AA, F539E857AA

Car Stalling or Rough Idle - Cleaning the IAC Valve (Idle Air Control)
The car in the video is a Mustang GT 2003 V8 4.6L. However, the procedures shown in the video will apply to most vehicles and applications.

WATCH THE OTHER VIDEOS ON MY CHANNEL!!! I REPLACE: TIE RODS, LOWER BALL JOINTS, CV AXLES, SWAY BAR LINKS AND MORE!!!

SUBSCRIBE FOR MORE!

#IACValve #IAC #StallingAtIdle

[Idle Air Control Valve / Air Bypass Valve / IAC actuator / Idle Air Control actuator]
Car stalling at idle? when stopping or slowing down?
An idle air control actuator or idle air control valve (IAC actuator/valve) is a device commonly used in fuel-injected vehicles to control the engine's idling rotational speed (RPM). So typically when the accelerator pedal is UP and the car is idling! When the accelerator is pressed, the throttle plate opens which allows air into the engine, that is why you wont have these symptoms when not at idle. When the throttle plate is closed, we still need a way for air to get into the engine otherwise the car will stall! This is where the IAC Valve comes into play! The car's computer will tell the valve to open 'enough' to allow 'enough' air to bypass the closed throttle plate to maintain a steady idle. Easy!
In carburetted vehicles a similar device known as an idle speed control actuator is used. Check your car has one. Electronic throttle body's do not. In this case, it might be something like a vacuum leak.

[Valve Actuator]
A valve actuator is a mechanical device that uses a power source to operate a valve. This power source can be electric, pneumatic (compressed air), or hydraulic (the flow of oil)
Examples: A choke aka the butterfly flap in a carburetor, Idle Air Control Valve etc

[Symptoms]
Rough at idle (sticking in a closed position)
Stalling at idle (sticking in a closed position)
RPM hesitation at idle (sticking in general)
High RPM at idle (1500rpm on start, 800rpm when warm aka after 2 minutes) (sticking in an open position)
When an extra load is placed on the engine, the RPMs can fluctuate or the engine can stall (AC compressor, auxiliary components, power steering etc)

Usually it's because the valve is gummed up with carbon deposits.

[Rule]
Idle Air Control Valve stuck open = high idle = allowing too much air to the engine
Idle Air Control Valve stuck closed = hesitation/stalling = Not allowing enough air to the engine

[Location]
Find the air filter (For air coming in). Follow the intake tubing from here. The Idle Air Control Valve will be at the other end of the intake tube (as it allows air to the engine from the intake tube!)

[Cleaning]
1. Keep motor upwards! This way our cleaning products won't enter our motor.
2. Try to move the internal valve manually (to confirm it's stuck)
3. Clean it! Use brushes to help
4. Make sure it's fully dry before re-installing

Video Title: Car Stalling or Rough Idle - Cleaning the IAC Valve (Idle Air Control)

Video File Created Date: 01 January 1601 (Video may or may not have been captured on this date, it shows the date the video was last converted.)

-- Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your YouTube videos offline... Then upload!
-- ginkosolutions.com/youtube-bulk-uploader
-- GinkoSolutions.com

Video Tags:
car, stalling, rough, idle, cleaning, iac, valve, air, control, mustang gt 2003, mustang gt, ford mustang, car stalling at idle, car stalling, car stalling when starting, car stalling while idle, car stalling out, car stalling after starting, idle air control valve, idle air control, rough idle, erratic idle, erratic engine idle, iac valve, iac valve symptoms, iac valve cleaning, iac valve testing, iac valve replacement, iac valve ford mustang
Car Stalling or Rough Idle - Cleaning the IAC Valve (Idle Air Control)How to Make a DIY Smoke Machine for Vacuum and Exhaust Leak Detection2-4. Method Overloading | C# Programming for Absolute Beginners0-0. What is C# and Why Learn C# | C# Programming for Absolute Beginners1-3. Data Types | C# Programming for Absolute BeginnersIntake Air Temperature Sensor ULTIMATE GUIDE | IAT Fix: P0110, P0111, P0112, P0113, P01149-11. The this Keyword | C# Programming for Absolute BeginnersFuel Pump Replacement - ULTIMATE GUIDE - Ford Mustang (1994-2004)6-3. For Loops | C# Programming for Absolute BeginnersRust Converter vs Rust Remover - How Do I Restore a Rusty Object?Multi Function Display (MFD) Removal on a Toyota Prius Gen2 (2004 05 06 07 08 09)How to Replace Motor Mounts and Transmission Mounts (Saturn Vue AWD 2004-2007)
TutorialGenius.com |

Car Stalling or Rough Idle - Cleaning the IAC Valve (Idle Air Control)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER