Uploaded October 2026 | Updated November 2026, 4 hours ago
Can an ESP32 watch actually replace your Apple Watch? I tested three different models to see if they hold up in daily use.
I installed Picoware on the Waveshare ESP32-S3-Touch-AMOLED-2.06, the Waveshare ESP32-C6-Touch-AMOLED-2.06, and the Elecrow CrowPanel 2.01. After porting the firmware to each, I lived with these devices to see how they perform for tasks like checking the time, using FlipSocial, and reading emails from the wrist.
These smartwatches offer a unique look at open-source hardware, but they come with trade-offs compared to mainstream wearables. We look at the display quality, battery life, and overall usability of these specific boards. Whether you are looking for a project device or a daily driver, understanding the limitations of this hardware is key before you start your next build.
Subscribe for weekly firmware breakdowns and tell me which hardware project you want to see tested next.
Waveshare ESP32-S3-Touch-AMOLED-2.06 — ESP32-S3R8, 2.06" AMOLED, 410×502, QSPI, dual digital microphones, watch case and strap included
Waveshare ESP32-C6-Touch-AMOLED-2.06 — ESP32-C6 (RISC-V), 2.06" AMOLED, 410×502, WiFi 6 / Bluetooth 5 / Zigbee, $29
Elecrow CrowPanel 2.01 — 2.01" IPS, 240×296, capacitive touch, mic + speaker, $18.99 (no enclosure, strap, or battery)
Links:
- Picoware GitHub: github.com/jblanked/Picoware
- Online Flasher: jblanked.com/picoware/flash
- Discord: discord.gg/vhSRPdvvc9
- Waveshare ESP32-S3-Touch-AMOLED-2.06: waveshare.com/ESP32-S3-Touch-AMOLED-2.06.htm
- Waveshare ESP32-C6-Touch-AMOLED-2.06: waveshare.com/esp32-c6-touch-amoled-2.06.htm
- Elecrow CrowPanel 2.01: elecrow.com/crowpanel-2-01inch-hmi-esp32-watch-display-240-296-ips-touch-screen-with-microphone-supports-voice-control-only-pcb.html?idd=5
#ESP32 #Picoware #ESP32Watch #Waveshare
Can an ESP32 watch actually replace your Apple Watch? I tested three different models to see if they hold up in daily use.
I installed Picoware on the Waveshare ESP32-S3-Touch-AMOLED-2.06, the Waveshare ESP32-C6-Touch-AMOLED-2.06, and the Elecrow CrowPanel 2.01. After porting the firmware to each, I lived with these devices to see how they perform for tasks like checking the time, using FlipSocial, and reading emails from the wrist.
These smartwatches offer a unique look at open-source hardware, but they come with trade-offs compared to mainstream wearables. We look at the display quality, battery life, and overall usability of these specific boards. Whether you are looking for a project device or a daily driver, understanding the limitations of this hardware is key before you start your next build.
Subscribe for weekly firmware breakdowns and tell me which hardware project you want to see tested next.
Waveshare ESP32-S3-Touch-AMOLED-2.06 — ESP32-S3R8, 2.06" AMOLED, 410×502, QSPI, dual digital microphones, watch case and strap included
Waveshare ESP32-C6-Touch-AMOLED-2.06 — ESP32-C6 (RISC-V), 2.06" AMOLED, 410×502, WiFi 6 / Bluetooth 5 / Zigbee, $29
Elecrow CrowPanel 2.01 — 2.01" IPS, 240×296, capacitive touch, mic + speaker, $18.99 (no enclosure, strap, or battery)
Links:
- Picoware GitHub: github.com/jblanked/Picoware
- Online Flasher: jblanked.com/picoware/flash
- Discord: discord.gg/vhSRPdvvc9
- Waveshare ESP32-S3-Touch-AMOLED-2.06: waveshare.com/ESP32-S3-Touch-AMOLED-2.06.htm
- Waveshare ESP32-C6-Touch-AMOLED-2.06: waveshare.com/esp32-c6-touch-amoled-2.06.htm
- Elecrow CrowPanel 2.01: elecrow.com/crowpanel-2-01inch-hmi-esp32-watch-display-240-296-ips-touch-screen-with-microphone-supports-voice-control-only-pcb.html?idd=5
#ESP32 #Picoware #ESP32Watch #Waveshare










