James Bruton | Can I RIDE THIS BIKE? @jamesbruton | Uploaded 2 years ago | Updated 15 hours ago
AD: PCBA from $0 (Free Setup, Free Stencil): jlcpcb.com/RHS
Follow JLCPCB FB&PM JLCPCB to get a $10 SMT coupon facebook.com/jlcpcb
Last time I built a giant omni-wheel. An omni-wheel can move in multiple directions because it has lots of smaller wheels around its circumference, so it can roll like a normal wheel, or slide sideways.
Normally you’d use at least three omni-wheels on a vehicle so that you can move or rotate in any direction. But in this video I’m going to put my giant omni-wheel on the front of a bicycle, and with some clever electronics I’m going to control the wheel so I can ride it.
I’m using the back end of the bike from the Makers Secret Santa Christmas video which Colin Furze left on my driveway. I’ll need to modify the bike so I checked it wasn’t Colin’s bike from his childhood or anything and he said it sounds cool.
As I mentioned last time, the wheel is going to be mounted the wrong way around on the front of the bike so the two wheels make a T-shape. So first of all I need to make some modifications to the front forks of the bike.
CAD and Code: github.com/XRobots/BIGOmni-Bike
You can support me on Patreon or buy my Merchandise:
***************************
Patreon: patreon.com/xrobots
Merchandise: teespring.com/stores/james-bruton
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
Matterhackers 3D printing supplies: http://www.matterhackers.com?aff=7500
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
Other socials:
***************************
Instagram: instagram.com/xrobotsuk
Facebook: facebook.com/xrobotsuk
Twitter: twitter.com/xrobotsuk
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: 3dfuel.com
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
Axminster Micro Lathe: http://bit.ly/2Sj6eeN
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
Why not join my community, who are mostly made up of actual geniuses. There’s a Facebook group and everything: facebook.com/groups/287089964833488
XROBOTS
Former toy designer, current YouTube maker and general robotics, electrical and mechanical engineer, I’m a fan of doing it yourself and innovation by trial and error. My channel is where I share some of my useful and not-so-useful inventions, designs and maker advice. Iron Man is my go-to cosplay, and 3D printing can solve most issues - broken bolts, missing parts, world hunger, you name it.
XRobots is the community around my content where you can get in touch, share tips and advice, and more build FAQs, schematics and designs are also available.
AD: PCBA from $0 (Free Setup, Free Stencil): jlcpcb.com/RHS
Follow JLCPCB FB&PM JLCPCB to get a $10 SMT coupon facebook.com/jlcpcb
Last time I built a giant omni-wheel. An omni-wheel can move in multiple directions because it has lots of smaller wheels around its circumference, so it can roll like a normal wheel, or slide sideways.
Normally you’d use at least three omni-wheels on a vehicle so that you can move or rotate in any direction. But in this video I’m going to put my giant omni-wheel on the front of a bicycle, and with some clever electronics I’m going to control the wheel so I can ride it.
I’m using the back end of the bike from the Makers Secret Santa Christmas video which Colin Furze left on my driveway. I’ll need to modify the bike so I checked it wasn’t Colin’s bike from his childhood or anything and he said it sounds cool.
As I mentioned last time, the wheel is going to be mounted the wrong way around on the front of the bike so the two wheels make a T-shape. So first of all I need to make some modifications to the front forks of the bike.
CAD and Code: github.com/XRobots/BIGOmni-Bike
You can support me on Patreon or buy my Merchandise:
***************************
Patreon: patreon.com/xrobots
Merchandise: teespring.com/stores/james-bruton
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
Matterhackers 3D printing supplies: http://www.matterhackers.com?aff=7500
Music for your YouTube videos: http://share.epidemicsound.com/xrobots
***************************
Other socials:
***************************
Instagram: instagram.com/xrobotsuk
Facebook: facebook.com/xrobotsuk
Twitter: twitter.com/xrobotsuk
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: 3dfuel.com
Lulzbot 3D Printers: http://bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: http://bit.ly/2RhArcD
Axminster Micro Lathe: http://bit.ly/2Sj6eeN
3D Printer Filament: http://bit.ly/2PdcdUu
Soldering Iron: http://bit.ly/2DrNWDR
Vectric CNC Software: http://bit.ly/2zxpZqv
Why not join my community, who are mostly made up of actual geniuses. There’s a Facebook group and everything: facebook.com/groups/287089964833488
XROBOTS
Former toy designer, current YouTube maker and general robotics, electrical and mechanical engineer, I’m a fan of doing it yourself and innovation by trial and error. My channel is where I share some of my useful and not-so-useful inventions, designs and maker advice. Iron Man is my go-to cosplay, and 3D printing can solve most issues - broken bolts, missing parts, world hunger, you name it.
XRobots is the community around my content where you can get in touch, share tips and advice, and more build FAQs, schematics and designs are also available.
