Corinne Blackstone | Calibrate the Wecreat Vision laser step by step guide @CorinneBlackstone | Uploaded May 2024 | Updated October 2024, 15 minutes ago.
Does your laser seem to be cutting off center? is it just not quite right? Then it may be time to calibrate your machine. This is a lot easier than many people think and we are going to walk through each step together as I calibrate my laser and then test it to make sure everything is working properly .
We will go step by step to calibrate your laser, discuss warnings and when you should calibrate as well as showing you how to test a file.
Get your own laser here shareasale.com/r.cfm?b=2344057&u=1872806&m=142145&urllink=&afftrack=
use code CORINNE BLACKSTONE to save $100
Be sure to tag me on Instagram on your photo if you make this project! @corinne_Blackstonecrafts
Sign up for my email newsletter
corinneblackstone.com
❤️ MY FAVORITE THINGS ❤️
VINYL STORE USE CODE: CORINNE to save 5%
bit.ly/39kGyI6
SHOP MY AMAZON STORE
amzn.to/3ouIDHH
GET A CRICUT
amzn.to/2pQ7Lvu
go.magik.ly/ml/zc8y
FIND ALL MY AFFILIATE LINKS
corinneblackstone.com/affiliate-links
JOIN MY CF FANS MEMBERSHIP
fans.creativefabrica.com/creators/corinneblackstone
SVG WEBSITES
https://designbundles.net?ref=ddMZ1K
creativefabrica.com/ref/236877
https://fontbundles.net?ref=ddMZ1K
thehungryjpeg.com/aff/Corinne
JOIN ME ON MY OTHER SOCIAL MEDIA PAGES
⭐️ MY INSTAGRAM
instagram.com/corinne_blackstonecrafts
⭐️TIK TOK
tiktok.com/@corinneblackstone0
⭐️ FACEBOOK
facebook.com/corinneblackstone
facebook.com/groups/194730291481720
00:00 Intro
00:57 How to make sure the laser bar lines up with the screw holes on the Wecreate Vision
02:20 How to install the laser grid tray
02:43 Insert the wood into the laser machine
03:27 Accessing settings in the wecreat software
03:55 Starting calibration
04:12 Calibration warnings for the Wecreat Vision
05:06 Calibration wood depth settings
05:53 Laser beginning to make the cross hair shapes on the wood
06:41 Laser reading the cross hairs to line up
07:03 Complete calibration in software
07:20 Uploading a test design
07:59 Auto focus the laser
08:18 Choosing your settings for Engraving and cutting
09:21 Laser engraving and cutting the wood
09:57 Check your cut and engrave
10:20 comparing the calibration to the non calibrated design
FTC: This video is NOT sponsored. Some links may be affiliate.
❤ ATTENTION COMPANIES: If you are a company interested in working with me, please contact cblackstone1111@gmail.com
Does your laser seem to be cutting off center? is it just not quite right? Then it may be time to calibrate your machine. This is a lot easier than many people think and we are going to walk through each step together as I calibrate my laser and then test it to make sure everything is working properly .
We will go step by step to calibrate your laser, discuss warnings and when you should calibrate as well as showing you how to test a file.
Get your own laser here shareasale.com/r.cfm?b=2344057&u=1872806&m=142145&urllink=&afftrack=
use code CORINNE BLACKSTONE to save $100
Be sure to tag me on Instagram on your photo if you make this project! @corinne_Blackstonecrafts
Sign up for my email newsletter
corinneblackstone.com
❤️ MY FAVORITE THINGS ❤️
VINYL STORE USE CODE: CORINNE to save 5%
bit.ly/39kGyI6
SHOP MY AMAZON STORE
amzn.to/3ouIDHH
GET A CRICUT
amzn.to/2pQ7Lvu
go.magik.ly/ml/zc8y
FIND ALL MY AFFILIATE LINKS
corinneblackstone.com/affiliate-links
JOIN MY CF FANS MEMBERSHIP
fans.creativefabrica.com/creators/corinneblackstone
SVG WEBSITES
https://designbundles.net?ref=ddMZ1K
creativefabrica.com/ref/236877
https://fontbundles.net?ref=ddMZ1K
thehungryjpeg.com/aff/Corinne
JOIN ME ON MY OTHER SOCIAL MEDIA PAGES
⭐️ MY INSTAGRAM
instagram.com/corinne_blackstonecrafts
⭐️TIK TOK
tiktok.com/@corinneblackstone0
⭐️ FACEBOOK
facebook.com/corinneblackstone
facebook.com/groups/194730291481720
00:00 Intro
00:57 How to make sure the laser bar lines up with the screw holes on the Wecreate Vision
02:20 How to install the laser grid tray
02:43 Insert the wood into the laser machine
03:27 Accessing settings in the wecreat software
03:55 Starting calibration
04:12 Calibration warnings for the Wecreat Vision
05:06 Calibration wood depth settings
05:53 Laser beginning to make the cross hair shapes on the wood
06:41 Laser reading the cross hairs to line up
07:03 Complete calibration in software
07:20 Uploading a test design
07:59 Auto focus the laser
08:18 Choosing your settings for Engraving and cutting
09:21 Laser engraving and cutting the wood
09:57 Check your cut and engrave
10:20 comparing the calibration to the non calibrated design
FTC: This video is NOT sponsored. Some links may be affiliate.
❤ ATTENTION COMPANIES: If you are a company interested in working with me, please contact cblackstone1111@gmail.com
