Did the DLM330 Meet Expectations? Second Review Artis Builds 2026-03-22 | Makita DLM330 lawn mower cutting test. In this short follow-up video I demonstrate the Makita DLM330 in real mowing conditions during the first grass cut of the season.I reviewed this mower previously, but at the time the weather was very dry and there wasn’t much grass available to properly demonstrate its cutting performance. In this video I show how the mower performs on a fresh patch of grass after the growing season has started.The Makita DLM330 is a compact cordless lawn mower designed for small gardens and light maintenance work. This video focuses purely on the cutting performance rather than a full review.Chapters0:00 Intro0:35 Mowing demonstration2:46 Final thoughts
Howdens Kitchen Installation (Part 4) | Worktop Oiling, Cornice Fitting & Drawer Installation Artis Builds 2026-04-22 | Continuing the Howdens paint-to-order kitchen installation, this video covers several finishing steps including oiling the wooden worktops, fitting the cornice, preparing the extractor trim, and installing drawers and door fronts.I start by applying oil to the worktops, explaining how I apply it and why proper preparation is important before installation. Later in the video I move on to fitting the cornice and discussing how the kitchen extractor will be concealed using trim pieces.Towards the end of the installation process, I continue with final worktop preparation, installing the last end panel, fitting drawers and door fronts, and finish with an important tip about what to pay attention to when drilling holes for cabinet handles.This video is part of a real client kitchen installation series, showing the practical workflow involved in fitting a modern Howdens paint-to-order kitchen.Timestamps0:00 Intro0:17 Oiling the worktops0:47 How I apply worktop oil2:46 Fitting the kitchen cornice2:55 How I will hide the kitchen extractor5:06 Preparing the trim for the extractor5:17 Next step of the installation7:23 Final preparation of worktops before installation9:19 Installing the last end panel9:35 Fitting drawers and door fronts10:17 What to watch for when drilling handle holes (Outro)Part 1 – youtu.be/FRsfQo32XQwPart 2 – youtu.be/uGRL9qjT0YoPart 3 –youtu.be/kbjepimfR6cPart 4 – [this video]
Makita Battery Powered Lawn Mower: Real Grass Test! Artis Builds 2026-04-16 | Watch the full video: youtu.be/C1rUYKaXIyY#Makita #MakitaMower
This paint-to-order kitchen turned out better than expected ✨ #beforeandafter #renovation Artis Builds 2026-04-15 | Howdens paint-to-order kitchen installation was one of the latest projects we did recently for one of our customers. It is a series of videos where we cover several important steps in the fitting process, talked about different "gotchas" that you may face when doing it as DIY.This video showcases a newly installed kitchen with light yellow cabinets and wooden countertops, providing inspiration for excellent kitchen design ideas. The footage highlights various features, including an island, a sink area with a black faucet, and built-in hobs, emphasizing the clean and modern kitchen design.For full installation video series, subscribe to the channel!!! #home #kitchen #diy #howdens
Installing a Paint-to-Order Howdens Kitchen | Real Client Job (Part 3) Artis Builds 2026-04-14 | Continuing the Howdens paint-to-order kitchen installation, this video covers several important steps in the fitting process including preparing the worktop, installing the kitchen extractor, and trimming end panels on the island unit.I also discuss a few practical considerations that are often overlooked when ordering and installing a kitchen. These include why it’s important to follow appliance installation instructions, why oiling a wooden worktop before installation is an essential protective step, and why it can be a good idea to order extra end panels when planning your kitchen.Later in the video I move on to installing the kitchen extractor and continue with the island installation, explaining what components are included and how the finishing panels are trimmed and fitted.This video is part of a real client kitchen installation series, showing the practical workflow and decision-making involved in fitting a modern Howdens kitchen.Timestamps0:00 Intro0:43 Why you should always follow appliance installation instructions2:00 Oiling the worktop before installation – protection and preparation3:16 Slight change of plans during the installation4:23 Ordering extra end panels – things to consider when planning a kitchen7:07 Installing the kitchen extractor7:53 Kitchen island installation – what is included11:42 Trimming and fitting end panels on the island unit (Outro)Part 1: youtu.be/FRsfQo32XQwPart 2: youtu.be/uGRL9qjT0YoPart 3: (this video)
Fixing a Springy Kitchen Panel? Try Space Plugs! Artis Builds 2026-04-13 | Full vid here: youtube.com/watch?v=uGRL9qjT0Yo
Move Tall Units Easily with This Fitters Mate! Artis Builds 2026-04-13 | Full video here: youtube.com/watch?v=uGRL9qjT0Yo#Howdens #HowdensKitchen #HowdensUnits
Saving money in this economy is crucial! Artis Builds 2026-04-11 | Watch the full video: youtu.be/qmvB3EMwbaU
Installing a Paint-to-Order Howdens Kitchen | Real Client Job (Part 2) Artis Builds 2026-04-07 | Continuing the Howdens paint-to-order kitchen installation, this video shows the next stage of the fitment process including plumbing preparation, unit alignment, and practical use of space plugs when installing kitchen cabinets.Before continuing with the cabinet installation, I prepare the area for the plumber to complete the necessary pipework. Once that’s done, I move on with positioning and aligning the units, demonstrating a handy tool I use to move kitchen cabinets around safely and efficiently.I also go through the process of aligning the units before final fixing, fitting the corner post, re-measuring to ensure a precise fit, and using space plugs in a practical installation scenario. Finally, I discuss what the next steps will be in the upcoming stage of the kitchen installation.This video is part of a real client kitchen installation series, showing the practical workflow of fitting a modern Howdens paint-to-order kitchen on site.Timestamps0:00 Intro0:03 Preparing for the plumber work0:43 Plumber arrives – pipework installation1:15 Plumbing work completed2:24 Tool I use to move kitchen units easily4:47 Aligning units before final fixing5:11 Fitting the corner post7:14 Re-measuring for a perfect fit9:00 Practical use of space plugs9:54 Continuing the fitment11:08 What comes next (Outro)
Installing a Paint-to-Order Howdens Kitchen | Real Client Job (Part 1) Artis Builds 2026-03-30 | In this video I begin the installation of a paint-to-order Howdens kitchen for one of my clients, showing the real process of fitting kitchen units on site. I go through the preparation, layout planning, wall fixing methods, and installing the first base units.I also explain space plugs, cabinet positioning, unit height from the floor, and the tools I use to fix kitchen units to the wall. This is the first part of the kitchen installation series where we start moving the first cupboards into position.Whether you're a carpenter, kitchen fitter, DIY enthusiast, or tradesperson, this video shows the practical workflow used when installing a modern Howdens kitchen.If you enjoy real trade jobs and tool insights, make sure to subscribe for more workshop and on-site content.Timestamps0:00 Intro1:38 Discussing the fitment process3:37 What are space plugs4:11 Space plug sizes explained5:36 Recap of the installation plan7:41 First cupboards moved into place7:52 Standard kitchen unit height from the floor15:50 Continuing the fitment16:03 Fixing kitchen units to the wall17:21 Continuing with the installation18:04 Encountering a problem
DeWalt DXV15TA Review — Compact 15L Wet & Dry Workshop Vacuum Artis Builds 2026-03-15 | DeWalt DXV15TA wet and dry vacuum review. In this video I take a detailed look at the DeWalt DXV15TA 15L shop vacuum, including what comes in the box, its build quality, technical specifications, and a short practical test.The DeWalt DXV15TA is a compact wet and dry workshop vacuum designed for general cleanup tasks in garages, workshops and light construction environments.In this review I go through the included accessories, examine the weight and overall build of the vacuum, and explain the technical specifications based on the manufacturer documentation. The video also includes a quick practical test followed by a balanced Pros and Cons summary.According to the manufacturer specifications, the DXV15TA uses an 1100 W motor with airflow rated at 42.5 litres per second and a sealed suction pressure of approximately 12 kPa. The vacuum features a 15-litre tank, a large 48 mm hose, and a 4.85 metre power cable, providing reasonable reach for workshop and site cleanup.This review focuses on practical usability rather than marketing claims, highlighting where this compact shop vacuum works well and where its limitations are.Chapters0:00 Intro0:21 What’s in the box6:35 Weight and handling6:45 Initial impressions8:03 Technical specifications explained9:55 Quick practical test11:51 Pros & Cons summaryBig thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for supporting this review.If you enjoy real-world tool reviews with honest testing and clear breakdowns, don’t forget to like, subscribe, and leave a comment.
I cant believe this Sharptool 2.0 isnt more popular Artis Builds 2026-03-08 | Blunt oscillating multitool blades are a common problem on site. Once the teeth dull or hit nails, many users simply replace the blade. The SharpTool 2.0 takes a different approach — it’s a drill-powered attachment designed to sharpen worn multitool blades and extend their usable life.In this video I take a closer look at the tool, discuss the general problem of dull blades in everyday trade use, and then demonstrate how the SharpTool 2.0 performs in practice. The video finishes with a balanced Pros & Cons overview based on real usage.The SharpTool 2.0 attaches directly to a cordless drill and uses a CBN grinding head to restore the cutting edge on oscillating multitool blades. According to the manufacturer it can be used on common blade types such as BIM, HCS and HSS blades.As always, the focus of this review is practical usability rather than marketing claims.Chapters0:00 Intro0:28 First look at the SharpTool 2.01:05 The problem with blunt multitool blades4:30 Sharpening in practice6:48 Pros & Cons and final thoughts
This Cabinet Design Flaw Costs Extra to Hide #renovation #kitchendesign #expense Artis Builds 2026-02-28 | Full video: youtu.be/pNzlDm-rYYEThis video details an issue with Wren cabinets, specifically that the underside will not be covered, which is important for any cabinet design. Depending on the color of your cabinets, like white exteriors and grey interiors, this can create noticeable gaps, affecting the overall interior design. This is a crucial point for any home improvement project, especially for those considering a DIY approach.
The Makita MR007GZ is Actually INCREDIBLE | Full Specs Artis Builds 2026-02-22 | The Makita MR007G is a multi-platform job site radio designed primarily for the 40V Max XGT system, while also supporting 18V LXT, 14.4V LXT and 12V CXT batteries. It can additionally operate via the supplied AC adaptor.In this review, I take a close look at the build quality, control layout, weight, and full technical specifications, followed by a short sound test. I also briefly show the previous radio I was using and explain why it was replaced.With DAB/DAB+, FM reception, Bluetooth streaming, USB device charging and an IP65-rated housing, the MR007G is positioned as a durable, higher-tier job site radio rather than a compact workshop unit.This review focuses on practical use and platform compatibility rather than marketing claims.Chapters0:00 Intro1:06 Design overview and control layout2:20 Previous radio and reason for upgrade2:45 Build quality and housing details3:45 Weight and handling4:06 Technical specifications explained7:08 Short sound test and final thoughts
DeWalt DCD85M: 90Nm Torque & Brushless Power Explained!💪 Artis Builds 2026-02-19 | Watch the full review here: youtu.be/9q6j11XrI74
DeWalt DCD85M Review — 90Nm Compact XR Combi Drill (McLaren Edition) Artis Builds 2026-02-15 | The DeWalt DCD85M is a compact 18V XR brushless combi drill rated at 90 Nm of torque. In this review, I take a close look at its size, weight, technical specifications, and real-world drilling performance, focusing on where it fits within the XR range.This McLaren edition shares the same mechanical specifications as the standard model, with differences limited to styling and kit configuration. The aim of this video is to evaluate performance and usability rather than cosmetic details.The DCD85M positions itself between lighter compact cordless drills and heavier flagship models, offering strong torque in a relatively short body. It is suited to demanding drilling and fastening tasks, while hammer functionality remains appropriate for light masonry work.Chapters0:00 Intro0:42 Design & build overview2:09 Weight and balance2:55 Technical specifications5:32 Quick drilling test7:04 Pros & Cons summaryBig thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for providing this tool for review and testing.
Pro Trick: Chamfer Corners with Your Makita Planer! Artis Builds 2026-02-12 | Watch the full review: youtu.be/y2UWRabfKhQ
Makita HR2670: Perfect for DIY, Not for Pros! Artis Builds 2026-02-11 | Full review: youtu.be/Iugz0DbaQr4
This Compact Milwaukee Jigsaw Is A Game-Changer Artis Builds 2026-02-07 | The Milwaukee M12 FJS is a compact, brushless jigsaw designed for controlled cutting and portability within the M12 platform. In this video, I take a close look at its design, handling, and real-world performance, focusing on where it works well — and where its limitations become clear.This review covers the tool’s physical layout, weight, and technical specifications, followed by a short practical test and a balanced Pros & Cons summary. The focus is on realistic trade use rather than headline specs, with comparisons framed against typical 18V jigsaws where relevant.The M12 FJS suits light-to-medium duty cutting, installation work, and tasks where size and control matter more than outright power. Heavier cutting and continuous site use are better handled by larger platforms.Chapters0:00 Intro0:28 Design, controls & blade system overview3:31 Weight, balance & handling4:03 Technical overview7:31 Quick practical cutting test9:36 Pros & Cons summary
Who Needs the Lamello Zeta P2? Pros Only! Artis Builds 2026-02-01 | Watch full review: youtu.be/DMi07n-QfjY
Router Trick: Groove Your Way to Easy Joinery! Artis Builds 2026-02-01 | Full review of Lamello Zeta P2: youtu.be/DMi07n-QfjY
DeWalt DCF85M McLaren Edition – Is This the Fastest Compact Impact Driver? Artis Builds 2026-01-29 | In this video, I take a detailed look at the DeWalt DCF85M (McLaren Edition), a compact 18V XR impact driver designed to deliver high torque in a very small and lightweight body.The review starts with a close look at the tool itself, followed by weight and size discussion to put its compact form into context. I then cover the technical specifications, including torque, speed modes, and control features, before moving on to a practical fastening test.The video wraps up with an honest Pros & Cons section, focusing on where this compact impact driver excels, where it has limitations, and whether the McLaren edition offers anything beyond the distinctive styling.This review is aimed at tradespeople and serious users who want a small, powerful impact driver for tight spaces and repetitive fixing work, and are considering whether a compact model can replace a larger tool in daily use.Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK.Timestamps0:00 – Intro0:21 – Close look at the tool1:32 – Weighing2:55 – Weight and size discussion3:36 – Technical details6:25 – Practical test8:36 – Pros & Cons (Outro)If you enjoy accurate, no-hype power tool reviews, consider liking the video and subscribing to the channel.Let me know in the comments whether you’d choose the McLaren edition or the standard version.
Makita HR2670 Review – Corded SDS-Plus Rotary Hammer Explained (Updated) Artis Builds 2026-01-22 | In this video, I take a detailed look at the Makita HR2670, a corded SDS-Plus rotary hammer designed for drilling and light chiselling work in concrete and masonry.The review focuses on the tool itself — covering weight and handling, followed by a clear and accurate technical breakdown based strictly on manufacturer specifications. I then wrap up with an honest Pros & Cons section, highlighting where this model makes sense and where its limitations are.This video is aimed at tradespeople and serious DIY users who are considering a reliable corded SDS-Plus drill for fixings, anchors, and general installation work, and want a realistic view of what this tool is — and isn’t — designed to do.⏱️ Timestamps0:00 – Intro0:42 – Weighing1:52 – Close-up tool inspection4:25 – Technical details6:58 – Pros & Cons (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) and Makita UK for supporting this review.If you appreciate accurate, no-hype tool reviews, consider liking the video and subscribing to the channel.Feel free to share your experience with SDS-Plus drills in the comments.#Makita #HR2670 #MakitaHR2670 #SDSPlus #RotaryHammer #CordedDrill #MakitaTools #ToolReview #ConstructionTools #PowerTools #MakitaUK
Makita RP001G Review – Is This XGT Cordless Plunge Router Worth It? Artis Builds 2026-01-21 | In this video, I take a detailed look at the Makita RP001G, a 40V XGT cordless plunge router aimed at professional routing tasks where corded routers have traditionally been the default choice.The review starts with what’s included in the box and a close-up look at the tool itself, followed by weight and balance. I then prepare the router for a practical test, go through the technical specifications, and put it to work to see how it performs in real use.I also cover the strengths and limitations of this router — including cordless convenience, handling, dust extraction behaviour, and overall practicality — before wrapping up with a clear Pros & Cons section to help you decide whether it makes sense for your workflow.This video is aimed at tradespeople and serious users who are either already invested in Makita’s XGT platform, or are considering a cordless alternative to a traditional mains-powered plunge router.⏱️ Timestamps0:00 – Intro0:21 – What’s in the box1:23 – Tool in close-up6:21 – Weight and balance7:02 – Assembling the router guide7:53 – Technical details10:28 – Practical test & observations13:29 – Pros & Cons (Outro)If you enjoy accurate, no-hype power tool reviews, consider liking the video and subscribing to the channel.Let me know in the comments how you feel about cordless plunge routers versus traditional corded setups.
DeWalt DCW620H2 Review – Cordless Plunge Router Worth the Upgrade? Artis Builds 2026-01-12 | In this video, I take a detailed look at the DeWalt DCW620H2, an 18V XR cordless plunge router designed to offer the control of a full-size plunge router without relying on mains power.I cover what’s included in the box, take a close look at the tool itself, discuss weight and handling, and then go through the technical specifications in detail — including speed range, cutter compatibility, and overall capability.You’ll also see a practical routing test, followed by an honest breakdown of the pros and cons, based on real use rather than marketing claims.This review is aimed at tradespeople and serious DIY users who are considering a cordless plunge router and want to understand where it fits compared to both trim routers and traditional corded plunge routers.⏱️ Timestamps0:00 – Intro0:31 – Checking box contents2:12 – Tool in close-up5:19 – Weight and balance5:58 – Technical specifications review7:47 – Practical routing test12:40 – Pros & Cons (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for supplying this tool for testing and review.If you enjoy real-world tool reviews and want honest performance testing before you buy, please like, subscribe, and let me know in the comments:If you've used this cordless router tool - what was your experience with it so far?
Lamello Zeta P2 Cordless Review – Is This the Ultimate Cabinetmaking Tool? Artis Builds 2026-01-05 | The Lamello Zeta P2 Cordless is a specialist joinery machine designed exclusively for Lamello’s P-System connectors. This is not a traditional biscuit joiner — it’s a precision tool aimed at professional cabinetmakers and furniture builders who value accuracy, speed, and repeatability.In this video, I take a detailed look at the tool itself, what’s included in the box, its weight and handling, and a full breakdown of the technical details. I also go deep into the Lamello clip system, covering the most common connector types and how they’re used in real-world cabinetry and furniture workflows.You’ll see practical examples of how the Zeta P2 Cordless is used with different connectors, how I combine it with a dual dowel system, and a few workflow tips — including where a router still makes sense alongside the Lamello system.This is a long-form, in-depth review aimed at viewers who are genuinely considering investing in the Lamello ecosystem and want to understand where the cost is justified — and where it might not be.📌 Timestamps:0:00 – Intro0:27 – Tool in close-up1:38 – What’s in the box7:41 – Weight and balance8:27 – Technical details11:35 – Lamello clip system overview17:33 – Using the three most common connectors in practice20:53 – Combining Lamello with a dual dowel system23:40 – Quick router workflow tip25:22 – Clip system review continues34:30 – Pros & Cons (Outro)If you enjoy detailed, real-world woodworking tool reviews that go beyond surface-level impressions, consider liking the video and subscribing to the channel.💬 Question for you:Would you invest in the Lamello P-System, or do traditional joinery methods still make more sense for your work?
Makita DRT50 Review – Is This the Most Versatile Cordless Trim Router? Artis Builds 2025-12-22 | In this video, I take a close look at the Makita DRT50 palm router, providing a comprehensive Makita router review focused on real-world use. This cordless router highlights the capabilities of Makita’s compact trim router, making it ideal for a wide range of woodworking projects.The Makita DRT50 is a versatile trim router built on the 18V LXT platform, designed for precision routing, edge profiling, and detailed finish work. I’ll walk through what’s included in the base set, what other add-ons are available, and explain why I personally own two DRT50 routers.You’ll also see how it compares to my older 110V Makita router, how the parallel guide attachment works in practice, and how the tool feels in terms of weight and balance.The video then covers the technical specifications, followed by a real-world routing test and an honest breakdown of the Pros & Cons to help you decide whether this Makita compact router is right for your workflow.📌 Timestamps:0:00 – Intro1:11 – Close-up look at the features2:10 – What’s included in the base set2:46 – Optional add-ons & attachments4:27 – Why I own two DRT50 routers4:56 – Issue with my previous 110V Makita router6:50 – Parallel guide add-on & how to use it10:36 – On the weight and balance11:31 – Technical specifications14:27 – In practice (routing test)16:35 – Pros & Cons (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk/).If you enjoy honest, real-world Makita tool reviews, don’t forget to like, subscribe, and let me know in the comments:Would you choose a cordless trim router over a mains-powered one?#Makita #DRT50 #MakitaDRT50 #TrimRouter #CordlessRouter #MakitaLXT #WoodworkingTools #ToolReview #MakitaTools #BrushlessTools #Routing #Carpentry
Kitchen looking incomplete, no worries !!! Artis Builds 2025-12-20 | Is your kitchen looking incomplete and you don't know where to start? Worry no more! This video is here to help you identify the missing elements that can elevate your kitchen's look and feel. From simple decor ideas to essential kitchen tools, we've got you covered. Whether you're a homeowner, a renter, or just someone who loves cooking, this video is for you. Get ready to transform your kitchen into a beautiful and functional space that you'll love spending time in. With our expert tips and tricks, you'll be able to create a kitchen that's not only complete but also reflects your personal style. So, what are you waiting for? Watch this video now and start giving your kitchen the makeover it deserves!
Upgrade, looks so much better!!! Artis Builds 2025-12-17 | Get ready for a stunning transformation as we take you through an incredible upgrade that will leave you speechless. From outdated to outstanding, this makeover is a must-see for anyone looking to revamp their space. With a keen eye for detail and a passion for design, we've managed to turn the ordinary into the extraordinary. Join us as we reveal the before and after, and discover the secrets behind this jaw-dropping upgrade that's sure to inspire your next project. Whether you're a DIY enthusiast or just looking for some home decor ideas, this video has something for everyone. So sit back, relax, and get ready to be amazed by the power of transformation.
Sliding door update… Artis Builds 2025-12-15 | Get the latest on our sliding door update, where we share the progress and changes made to our home's entrance. From the initial installation to the final touches, we're taking you through the entire process. Whether you're looking for inspiration for your own home renovation or simply curious about the updates, this video has got you covered. Watch to find out what's new and what's next for our sliding door.
DeWalt DCE530N Review – Is a Cordless Heat Gun Actually Worth It? Artis Builds 2025-12-14 | The DeWalt DCE530N is a cordless heat gun built on the 18V XR platform, designed to offer portability and convenience without relying on mains power. In this video, I take a close look at the tool, go through the technical specifications, and put it to work in a real-world practical test.With two temperature settings, dual airflow control, and a lightweight, compact design, the DCE530N is aimed at electricians, installers, and trades who need quick, controlled heat on site — from heat-shrink tubing to adhesive softening and light paint removal.I’ll also share honest Pros & Cons based on real use, to help you decide whether a cordless heat gun makes sense for your workflow, or if a traditional corded unit is still the better option.📌 Timestamps:0:00 – Intro0:58 – Unboxing2:02 – Visual inspection & build quality3:11 – Weighing the tool3:48 – Technical details6:26 – Quick practical test9:07 – Pros & Cons10:17 – Final thoughts (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for supporting this review.If you enjoy real-world tool reviews with honest testing and clear breakdowns, don’t forget to like, subscribe, and leave a comment:Would you choose a cordless heat gun over a corded one?#DeWalt #DCE530N #DeWaltDCE530N #CordlessHeatGun #DeWaltXR #18VXR #ToolReview #PowerTools #TradesTools #DeWaltTools #HeatGunReview #CordlessTools
Garage rescue!!! Artis Builds 2025-12-11 | Join us on an epic garage rescue mission where we dive into a cluttered and disorganized garage and transform it into a tidy and functional space. From sorting through years of accumulated junk to discovering hidden gems, we'll take you through the entire process of rescuing a garage from chaos. Get ready for a thrilling before-and-after transformation that will inspire you to tackle your own garage organization project. Watch as we clear out the clutter, set up storage solutions, and create a space that's perfect for parking, storage, and even working on projects. Whether you're a DIY enthusiast, a homeowner, or simply someone who loves a good transformation, this garage rescue video is for you.
Customers vision brought to life!!! Artis Builds 2025-12-10 | Discover how we transform our customers' vision into reality, bringing their unique ideas to life through innovative solutions and exceptional craftsmanship. From concept to completion, we work closely with our clients to ensure their dreams are exceeded. Watch as we showcase the journey of turning imagination into tangible masterpieces, highlighting the attention to detail and dedication that goes into every project. Get inspired by the possibilities and see how we can help you achieve your goals.
Makita DKP180 Review – Is This Still a Good Planer in 2025? Artis Builds 2025-12-07 | In this video we take a detailed look at the Makita DKP180, an 18V LXT cordless planer that has been around for years but is still widely used on job sites and in workshops. I’ll walk through its key features, weight, technical specifications, and then put it to work in a real-world planing test.Having used this planer personally for several years, I’ll also share some reliable long-term Pros & Cons, as well as how it compares to more modern brushless models.Whether you're considering buying this tool second-hand, adding a planer to your 18V LXT kit, or looking for honest real-world performance — this review should help you make the right decision.📌 Timestamps:0:00 – Intro0:27 – Looking closer (close-up tool inspection)2:36 – Weighing3:09 – Discussing technical details6:01 – Practical test8:14 – Pros and Cons9:05 – Final thoughts (Outro)If you enjoy real-world tool reviews with clear technical breakdowns, please like, subscribe, and share your thoughts:Are you still using a brushed planer, or have you switched to brushless models?#Makita #DKP180 #MakitaDKP180 #CordlessPlaner #MakitaLXT #WoodworkingTools #PlanerReview #CarpentryTools #ToolReview #18VLXT #MakitaPlaner #Woodworking
DeWalt DCF860 – Is This the Most Powerful 18V Impact Driver You Can Buy? Artis Builds 2025-11-30 | The DeWalt DCF860 is currently the most powerful 18V XR impact driver from DeWalt, delivering an impressive 282 Nm of torque in a compact, 123 mm package.In this video, we take a close look at its standout features, review the ergonomics and weight, break down the official technical specifications, and finally put it into a real-world driving test to see how it performs under load.With a brushless XR motor, 3-speed selection, up to 3,800 RPM, and a 9-LED worklight ring, the DCF860 is built for heavy-duty fastening and pro-level site work — but is all that power actually worth upgrading to?📌 Timestamps:0:00 – Intro0:21 – Talking through key features1:51 – On the weights2:12 – Additional design details2:57 – Technical specifications5:29 – Quick practical test7:41 – Pros & Cons (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for supplying this tool for testing and review.If you enjoy real-world tool reviews and want honest performance testing before you buy, please like, subscribe, and let me know in the comments:Is the DCF860 powerful enough to replace your current impact driver?#DeWalt #DCF860 #DeWaltDCF860 #ImpactDriver #DeWaltXR #PowerTools #ToolReview #ConstructionTools #DeWaltTools #CordlessTools #282NmImpactDriver #DeWaltUK #PowerStack
Makita DJS161Z – Is This the Best 18V Metal Shear for Clean Cuts? Artis Builds 2025-11-23 | The Makita DJS161Z is an 18V LXT straight-body metal shear designed for fast, clean, and spark-free cutting in sheet metal. In this review, we’ll go through everything from the unboxing to the technical specifications, before putting it through a real-world cutting test to see how it handles mild steel, stainless, and aluminium.With a 4,300 SPM stroke rate, compact body, and material capacity up to 1.6 mm steel and 1.2 mm stainless, the DJS161Z offers a safer and cleaner alternative to cutting metal with angle grinders — especially on jobs where control and accuracy matter.We’ll also take a look at the Pros & Cons to help you decide whether this specialised tool has a place in your workshop or job site kit.📌 Timestamps:0:00 – Intro0:40 – What’s in the box & close-up look1:53 – On the weights2:40 – Technical details4:55 – Cutting metal8:41 – Pros & Cons (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) for supplying this tool.If you enjoy real-world tool testing and want honest, detailed reviews before you buy, please like, subscribe, and let me know in the comments:Would you switch from grinders to shears for your sheet metal work?#Makita #DJS161Z #MakitaDJS161Z #MetalShear #SheetMetalTools #MakitaLXT #18VLXT #MetalFabrication #ToolReview #CuttingMetal #MakitaTools #CleanCuts #SparkFreeCutting
DeWalt DCH273 – Is This 18V Rotary Hammer Powerful Enough for the Job? Artis Builds 2025-11-12 | The DeWalt DCH273 is part of DeWalt’s 18 V XR Brushless SDS-Plus lineup, designed to bring serious rotary-hammer performance to a compact cordless package.In this review, we’ll take a detailed look at the drill itself, check its weight and packaging, go over the technical specifications, and put it through a real-world drilling test to see if it truly holds up against its corded and FlexVolt cousins.With 2.1 J of impact energy, up to 4,600 bpm, and DeWalt’s SHOCKS Active Vibration Control, the DCH273 delivers a blend of power, comfort, and portability that’s ideal for anchors, fixings, and day-to-day site work.Timestamps:0:00 – Intro0:33 – Drill up close & first impressions3:09 – On the weights and balance3:37 – Packaging and kit contents4:29 – Technical details and specifications7:14 – Quick practical drill test9:15 – Pros & Cons (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for providing this tool for testing and review.If you like real-world tool reviews and want honest insights before upgrading, make sure to like, subscribe, and comment below — is this 18 V rotary hammer powerful enough for your work?#DeWalt #DCH273 #DeWaltDCH273 #DeWaltXR #SDSPlus #RotaryHammer #BrushlessDrill #PowerTools #ToolReview #DeWaltUK #CordlessDrill #DeWaltTools #ConstructionTools #Drilling #ConcreteDrill
DeWalt DCN660 – Should You Ditch Pneumatic Nailers for This? Artis Builds 2025-11-04 | The DeWalt DCN660 is a 16-gauge angled finish nailer designed to replace your compressor and hose setup with a fully cordless system — and in this video, we’re finding out if it’s truly capable of doing that.Powered by DeWalt’s 18V XR brushless platform, the DCN660 offers consistent driving power, tool-free adjustments, and a professional-level finish without the noise and hassle of air tools.We’ll take a close look at the design, build quality, and internal features, go over the full technical specifications, and put it through a real-world performance test to see if this tool can finally make pneumatic nailers a thing of the past.Timestamps:0:00 – Intro0:21 – Design and close-up check3:38 – Technical specifications6:34 – Real-world thoughts & performance8:25 – Pros, Cons & final thoughtsBig thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for providing this tool for review and testing.If you enjoy in-depth DeWalt reviews and want honest, hands-on testing before you buy, please like, subscribe, and let me know in the comments — Would you ditch your pneumatic nailer for this?#DeWalt #DCN660 #DeWaltDCN660 #DeWaltNailer #FinishNailer #CordlessNailer #DeWaltXR #DeWaltUK #ToolReview #CarpentryTools #TrimWork #SecondFix #BrushlessNailer #DeWaltTools
Makita DTD153 Review – Compact Power You Can Count On! Artis Builds 2025-10-27 | The Makita DTD153 is one of the most compact and capable impact drivers in the 18V LXT range, combining brushless efficiency, high torque, and Makita reliability in a lightweight body.In this review, we’ll take a close look at the design, weight, and build quality, before putting it through its paces in a practical test. You’ll also see full technical specs and an honest pros and cons breakdown to help decide if it’s the right impact driver for your work.With a 170 Nm brushless motor, up to 3,400 rpm, and 3,600 ipm, this tool is designed for fast, precise fastening — all in a body that’s just 126 mm long. Compact, comfortable, and reliable — this is Makita engineering done right.Timestamps:0:00 – Intro0:36 – Visual overview and first impressions2:40 – Weight and balance3:22 – Technical specifications5:46 – In-action performance test10:22 – Pros, cons & final thoughtsIf you enjoy detailed tool reviews and real-world performance comparisons, please like, subscribe, and leave a comment — which Makita tool should we test next?#Makita #MakitaDTD153 #MakitaLXT #PowerTools #ToolReview #ImpactDriver #MakitaUK #MakitaTools #DTD153Review #MakitaBrushless
DeWalt DCS369N Review – Compact Power in the XR Lineup! Artis Builds 2025-10-19 | The DeWalt DCS369N is one of the most compact reciprocating saws in the DeWalt 18V XR range, combining lightweight design with serious cutting capability.In this review, I’ll cover what’s included in the box, give you a closer look at the tool itself, test its performance, and go through the full technical specs to see whether this sub-compact recip saw deserves a place in your toolkit.Powered by DeWalt’s brushless motor, running at up to 2,800 strokes per minute with a 16mm stroke length, it’s built for precision, control, and portability — perfect for electricians, plumbers, and on-site maintenance work.Timestamps:0:00 – Intro0:39 – What’s in the box1:02 – Close-up & first impressions3:47 – Weight, balance & handling5:27 – Technical specifications overview7:41 – Real-world cutting test11:28 – Pros, Cons & final thoughtsBig thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for providing this tool for testing and review.If you enjoy detailed tool reviews and honest, real-world performance tests, please like, subscribe, and let me know in the comments — which tool should I test next?#DeWalt #DCS369N #DeWaltXR #PowerTools #ToolReview #DeWaltUK #ReciprocatingSaw #DeWalt18V #DCS369NReview #CompactRecipSaw #DeWaltTools
Makita DHP486 Review – Is It the Ultimate 18V Drill? Artis Builds 2025-10-13 | The Makita DHP486 is Makita’s most powerful 18V LXT drill to date — compact, durable, and built for serious trade use.But is it really worth upgrading from your current combi drill? Let’s put it to the test.In this video, we’re taking a detailed look at the Makita DHP486, the flagship brushless hammer driver drill in Makita’s 18V LXT lineup.We’ll explore its build quality, handling, and technical performance, and then see how it performs in a quick real-world test.With 130 Nm of torque, a 178 mm compact body, and XPT protection against dust and moisture, the DHP486 is built to handle demanding site work — but how much better is it really? Let’s find out.Timestamps:0:00 – Intro0:14 – First impressions & close-up overview1:57 – Weight and balance check2:31 – The missing details (specifics I forgot to mention)3:15 – Reviewing the technical specifications5:39 – Quick test: performance in action6:57 – Pros, cons & final thoughtsIf you enjoy in-depth tool reviews and real-world performance tests, please like, subscribe, and share your thoughts in the comments — which tool should we test next?#Makita #MakitaDHP486 #MakitaLXT #MakitaUK #PowerTools #ToolReview #MakitaDrill #CombiDrill #LXTDrill #MakitaDHP486Review
DeWalt DCD805 vs DCD796 – Should You Upgrade in 2025? Artis Builds 2025-10-05 | In this video, we’re comparing two of DeWalt’s most popular compact hammer drills — the DCD796 and the DCD805.Both sit in the 18V XR lineup, but the DCD805 brings an updated brushless motor, improved ergonomics, and smarter LED lighting, all while keeping that compact DeWalt feel.We’ll go through technical specifications, build differences, weight, and real-world drilling test to find out which drill truly earns its spot in your toolkit for 2025.⏱️ Timestamps0:00 – Intro0:28 – Comparing the two (Technical Specs)3:53 – Visual differences6:18 – On the weights7:35 – Drill test and discussion10:22 – Price trends10:37 – PROS & CONS (Outro)Big thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for providing these tools for review.If you enjoy detailed tool comparisons and real-world testing, please like, subscribe, and leave a comment — I’d love to hear which DeWalt tool you want reviewed next!#DeWalt #DCD805 #DCD796 #DeWaltTools #ToolReview #DeWaltXR #PowerTools #DeWaltUK
Makita DML810 Review – The Brightest Jobsite Light I’ve Used! Artis Builds 2025-09-28 | In this video, I take a closer look at the Makita DML810 18V/240V LXT Work Light, also known as the self-righting upright site light. We’ll go over the features, weigh the unit, dive into the technical specs, and wrap up with pros and cons after some hands-on impressions.⚠️ Note: Everything in this video reflects my personal opinion. The review is not influenced by how I got the tool — I review it as if I bought it myself.Timestamps:0:00 Intro0:42 Weighing the DML8101:12 Features overview5:37 Technical specifications7:54 Pros & Cons / OutroIf you’ve used this light, I’d love to hear your experience in the comments!
DeWalt DCD796 Review – Compact Beast or Overhyped Drill? Artis Builds 2025-09-20 | Today we’re testing and reviewing the DeWalt DCD796 XR Brushless Hammer Drill Driver. Compact, powerful, and versatile — but is it still worth buying in 2025?We’ll cover its features, weight, technical performance, a quick real-world test, and of course, the pros and cons.Timestamps:0:00 – Intro0:24 – Key Features Overview2:42 – Weight & Size on the Scales3:40 – Technical Review (Specs & Performance)6:28 – Practical Test in Action8:50 – Pros, Cons & Final VerdictBig thanks to Sterling Power Tools (sterlingpowertools.co.uk) and DeWalt UK for providing this tool for review.⚠️ Note: Everything in this video is my own personal opinion. The fact that this tool was provided for review has no influence on my view or conclusions — I treat it the same as if I had purchased it myself.🔔 Don’t forget to subscribe for more tool reviews, tests, and comparisons!#DeWalt #DCD796 #ToolReview
