Uploaded February 2019 | Updated September 2026, 4 hours ago
If you like my stuff please support me on music.ollilab.com and patreon.com/theBURG
My music:
Bandcamp ► music.ollilab.com
Spotify ► open.spotify.com/artist/5lPHagff7SG960LQZfva9Q
#plonk #intellijel #ms20
This track is all about the modular with a twist of ms-20. I wanted to experiment a bit with the new Plonk and 1U Steppy that i added recently to the rack. This thing sounds fabulous, great module that has a lot of use cases.. not just rhytmic but also very musical.
Modular sound sources:
- Plonk - intro bass sound / Eloquencer
- Braids - intro 5 step sequence / qubit Octone
- MI Rings into uClouds - weird spacy melodies / Eloquencer
- MI Peaks - kick and snare / Eloquencer
- BIA - additional percussion / Steppy
- Tides (sheep fw) - Second wavetable bass sound / Eloquencer
- 3x A111-3 - chord stabs / uO_C Chords in Harrington 1200 mode + Eloquencer
I use the planar2 joystick to adjust the Ripples filter for the Braids sequence, and it also controls the wavetable morphing on the Tides/Sheep bass sound. Tetrapad is also controlling the Tides/Sheep bass sound for some added performance stuff.
A lot of modulation is happening in the Braids, Rings, Tides BIA.. PAM is the main source plus some gates from the Intellijel Steppy.
Modular Grid Links:
Main rack: modulargrid.net/e/racks/view/677665
Control rack: modulargrid.net/e/racks/view/602664
FX on modular rack:
- Strymon Timeline
- Keeley Caverns
- Presonus Plate reverb (in mixer)
FX on ms-20
- Strymon el Capistan (not visible in video)
- Presonus Plate reverb (in mixer)
Enjoy!
BoooOoooM!
If you like my stuff please support me on music.ollilab.com and patreon.com/theBURG
My music:
Bandcamp ► music.ollilab.com
Spotify ► open.spotify.com/artist/5lPHagff7SG960LQZfva9Q
#plonk #intellijel #ms20
This track is all about the modular with a twist of ms-20. I wanted to experiment a bit with the new Plonk and 1U Steppy that i added recently to the rack. This thing sounds fabulous, great module that has a lot of use cases.. not just rhytmic but also very musical.
Modular sound sources:
- Plonk - intro bass sound / Eloquencer
- Braids - intro 5 step sequence / qubit Octone
- MI Rings into uClouds - weird spacy melodies / Eloquencer
- MI Peaks - kick and snare / Eloquencer
- BIA - additional percussion / Steppy
- Tides (sheep fw) - Second wavetable bass sound / Eloquencer
- 3x A111-3 - chord stabs / uO_C Chords in Harrington 1200 mode + Eloquencer
I use the planar2 joystick to adjust the Ripples filter for the Braids sequence, and it also controls the wavetable morphing on the Tides/Sheep bass sound. Tetrapad is also controlling the Tides/Sheep bass sound for some added performance stuff.
A lot of modulation is happening in the Braids, Rings, Tides BIA.. PAM is the main source plus some gates from the Intellijel Steppy.
Modular Grid Links:
Main rack: modulargrid.net/e/racks/view/677665
Control rack: modulargrid.net/e/racks/view/602664
FX on modular rack:
- Strymon Timeline
- Keeley Caverns
- Presonus Plate reverb (in mixer)
FX on ms-20
- Strymon el Capistan (not visible in video)
- Presonus Plate reverb (in mixer)
Enjoy!
BoooOoooM!
![BURG1k Hardware Jam Group Challenge [Challenge Ended on 12/5]](https://i.ytimg.com/vi/QqyJr6Y-LKY/mqdefault.jpg "BURG1k Hardware Jam Group Challenge [Challenge Ended on 12/5]
This challenge has Ended on 2018-12-05, thanks for all submissions!
The main idea of this challenge is to give others insight and inspiration of what they can get for 1000USD, also what the setup could potentially sound like.
My music:
Bandcamp ► https://music.ollilab.com/
Spotify ► https://open.spotify.com/artist/5lPHagff7SG960LQZfva9Q
The total cost of gear should NOT exceed 1000 USD
The cost should be for ALL music gear used, synths, FX pedals etc
Video and Audio recorder units, Mixing console and cables, peripherals are excluded from the total cost calculations
A complete list of the gear, items used is mandatory in the post detailing the total cost.
Please remember for your own submissions, videos are easier to review should there be any questions regarding the actual use of equipment, so if you know that your track will sound complex, a video is recommended.
Also, try and keep your track below or around 5 minutes, there will be a lot of music for all of us to review and listen to.
Make sure to check out my third BURG1k session, maybe this one can help give you guys some inspiration!
Reading the official rules prior any submissions is mandatory.
### Hardware Jams and BURG1k challenge official rules:
This competition challenge is FREE to enter.
A facebook account is required to be able to compete for the challenge prize, as the competition challenge is hosted on the hardware Jams facebook group.
https://www.facebook.com/groups/hardwarejams/
The challenge prize is a second hand KORG volca fm with authentic BURG studio dust and patina, will be given and delivered to one single winner in current condition. The challenge prize winner will be selected by vote by fellow members, competitors and peers in the Hardware Jams facebook group.
Cost of economy shipping with a tracking number to the country of the winners residence for the KORG volca fm is included.
Any customs duties, tax and/or other import fees in the country of the winners residence are borne by the winner of the challenge prize and is not the responsibility of any affiliates of the Harware Jams Group, oLLiLaboratories or BURG.
Any problems with shipping and/or other damages caused by the selected logistics partner will not be covered by any affiliates of the Harware Jams group, oLLiLaboratories or BURG.
How to enter:
1.) Join the Hardware Jams facebook group
https://www.facebook.com/groups/hardwarejams/
2.) Record a live jam session, using hardware gear that does not exceed the total cost of 1000USD.
TAG your video or audiotrack with hashtag #BURG1kChallenge
The cost should be for ALL music gear used, synths, samplers, loopers, FX pedals etc
Video and Audio recorder units, Mixing console and cables, peripherals are excluded
3.) Live Jam session submission and rules
Submissions can only start on Friday 2018-11-30 18.00 AEST
Post a link to your track on the Hardware Jams facebook group official BURG1k challenge thread
Provide a written complete list of the gear, equipment used, is mandatory in the submission post detailing the cost
Track must be recorded between 2018-11-30 to 2018-12-02
Track must be recorded live, no multi-tracking, overdubbing allowed
Track must be around or less than 5 minutes playing time
Post processing, compressor, limiter is allowed when mastering the final track
You must be able to prove that the video/track you have submitted is yours, so ensure you enter with your real name
4.) Last date for track submission entry is Sunday 2018-12-02 18.00 AEST
5.) Last date for member voting on track submissions is Wednesday 2018-12-05 18.00 AEST
Winner announcement:
1.) The winner will be selected by the Hardware Jams Group affiliates, based on most votes received by its members, competitors and peers in the Hardware Jams facebook group.
The voting will be done on the Hardware Jams Group official BURG1k challenge voting thread.
Hardware Jams Group members are allowed to vote on multiple submissions.
Winner is the submission entry with the most number of votes at 2018-12-05 18.00 AEST
2.) Winner announcement will be made on the Hardware Jams Facebook group, not on YouTube.
3.) If the winner does not reply to requests for acceptance of the prize within 3 days, they will be disqualified from the prize and the runner up will be chosen. No new submissions will be allowed.
4.) After the winner has been successfully announced and they have accepted, the unit will be shipped within 2-3 weeks time.
Disqualification:
- Failure to comply with the official rules
- Any tracks made and/or recorded before or after the challenge set dates
- Any attempts of cheating or manipulation of the voting results
YouTube community guidelines:
https://www.youtube.com/yt/about/policies/#community-guidelines
This competition is not affiliated with any business and/or vendor, this is a personal challenge prize that goes back to the hardware synth community.")
