Csongor Varga | Building new weather stations: ESP, ESPHome and Arduino @csongorvarga | Uploaded 4 months ago | Updated 7 hours ago
I had a weather station which I wanted to redesign and break it into two different station measuring different weather data. This video is about the build of these two weather stations.

Temperature Station ESPHome file: https://github.com/nygma2004/km/blob/main/temperaturestation.yaml
secrets.yaml is a simple file like this:
wifi_ssid: "xxx"
wifi_password: "xxx"
ota_password: "xxx"
mqtt_ip: "192.168.1.xx"
mqtt_user: "xx"
mqtt_password: "xx"
ip_gateway: "192.168.xx.xx"
ip_subnet: "255.255.255.0"
Light station sketch: https://github.com/nygma2004/lightstation

If you like what I do here, you can support me with Youtube Thanks, or Patreon:
https://patreon.com/csongorvarga
TikTok channel most on trains, big and small: https://www.tiktok.com/@frontendfriday
And same in Instagram: https://www.instagram.com/hamptongardenrailway/

Chapters:
0:00 Intro and Plan
11:33 Disassembly of the old
14:05 Building the new light sensor
18:26 ESP Home code
21:17 Light station sketch
27:19 Light Station
31:00 Temperature station build
33:25 Light sensor install
37:56 Temp station build resumes