Uploaded April 2019 | Updated September 2026, 2 weeks ago
A spot was need to place a coffee mug and plug things in. Here's how I built this custom console from pieces of our RV dinette that we removed in the first video. The new console also adds more USB plugs, a 12 volt plug and a 120 Volt AC outlet right next to our new recliners.
*Website* : rvwithtito.com
*Patreon* : patreon.com/rvwithtito
*Discounts on Popular RV Gear* : rvwithtito.com/discounts
*Gear, project parts and tools* : rvwithtito.com/gear
*CLICK HERE for a Full List of REMODEL PARTS*
rvwithtito.com/parts/rv-remodel
*CLICK HERE to WATCH The ENTIRE RV REMODEL SERIES* : youtube.com/playlist?list=PLIsusUNNN2JaTOI03gbTh_fmDhzTAWQsC
*More about this project*
After removing the dinette in the first remodel video, the AC and DC power plugs I previously wired near the cab area were still there. I planned to build a nice console to house those power plugs and add a little spot next to the front recliner to set things down.
HOW WE USE POWER IN THE FRONT OF THE RV: Our RV did not come with any power plugs in the front of our class C motorhome. So years ago I installed an AC outlet and 12V plug near the cab area on the back of the dinette. This enabled us to have AC power and DC power from our house batteries in the cab while driving. It was also a convenient location to plug in a Battery Tender and trickle charge the chassis battery during the winter.
REUSING SCRAP MATERIAL FROM THE DINETTE: I wanted the new console to look like it came installed from the factory. Matching the exact finish and material of the fake wood cabinets and countertop would be difficult if had used new materials. So I decided to use parts of the old dinette for this build. Here’s what I reused:
(1) I made the side table out of the dinette table top
(2) I wrapped the console body with wood paneling from the dinette
(3) I made custom trim from the RV bench seat wood to wrap the slide out wall
I had to make custom trim for the edges of the console, but I was able to match the finish pretty well with some walnut wood stain. The wood stain also worked great to cover up blemishes in the existing paneling.
CUTTING HOLES AND INSTALLING ELECTRICAL PLUGS: I marked the locations on the face where the electrical outlets would go and cut out holes with a hole drill and jigsaw. I wired up a new 12V socket and used the existing AC outlet. Finally, I added a new dual USB plug near the countertop because you can never have enough USB plugs around. Our recliners have a couple built-in USB plugs that are only powered when the recliners have AC power. The new USB plugs are always powered directly from the house batteries.
#rvwithtito #rvrenovation #rvremodel
*Disclaimer*
The opinions expressed in our videos are our own or from a contributor. Before taking on any project or making a large purchase, we recommend you do your own research and consult a professional for advice. We are NOT liable for any damage to your RV or injury incurred as a result of following our tips, advice or instructions. We are not RV professionals or certified technicians. We are simply RV owners who work on our own RVs and have a desire to share what we learn with others. Be responsible and know your limits.
*Affiliate Disclosure*
This video may include links to merchants with affiliate programs who pay us a commission on purchases made or actions taken after clicking the link. We are a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases.
A spot was need to place a coffee mug and plug things in. Here's how I built this custom console from pieces of our RV dinette that we removed in the first video. The new console also adds more USB plugs, a 12 volt plug and a 120 Volt AC outlet right next to our new recliners.
*Website* : rvwithtito.com
*Patreon* : patreon.com/rvwithtito
*Discounts on Popular RV Gear* : rvwithtito.com/discounts
*Gear, project parts and tools* : rvwithtito.com/gear
*CLICK HERE for a Full List of REMODEL PARTS*
rvwithtito.com/parts/rv-remodel
*CLICK HERE to WATCH The ENTIRE RV REMODEL SERIES* : youtube.com/playlist?list=PLIsusUNNN2JaTOI03gbTh_fmDhzTAWQsC
*More about this project*
After removing the dinette in the first remodel video, the AC and DC power plugs I previously wired near the cab area were still there. I planned to build a nice console to house those power plugs and add a little spot next to the front recliner to set things down.
HOW WE USE POWER IN THE FRONT OF THE RV: Our RV did not come with any power plugs in the front of our class C motorhome. So years ago I installed an AC outlet and 12V plug near the cab area on the back of the dinette. This enabled us to have AC power and DC power from our house batteries in the cab while driving. It was also a convenient location to plug in a Battery Tender and trickle charge the chassis battery during the winter.
REUSING SCRAP MATERIAL FROM THE DINETTE: I wanted the new console to look like it came installed from the factory. Matching the exact finish and material of the fake wood cabinets and countertop would be difficult if had used new materials. So I decided to use parts of the old dinette for this build. Here’s what I reused:
(1) I made the side table out of the dinette table top
(2) I wrapped the console body with wood paneling from the dinette
(3) I made custom trim from the RV bench seat wood to wrap the slide out wall
I had to make custom trim for the edges of the console, but I was able to match the finish pretty well with some walnut wood stain. The wood stain also worked great to cover up blemishes in the existing paneling.
CUTTING HOLES AND INSTALLING ELECTRICAL PLUGS: I marked the locations on the face where the electrical outlets would go and cut out holes with a hole drill and jigsaw. I wired up a new 12V socket and used the existing AC outlet. Finally, I added a new dual USB plug near the countertop because you can never have enough USB plugs around. Our recliners have a couple built-in USB plugs that are only powered when the recliners have AC power. The new USB plugs are always powered directly from the house batteries.
#rvwithtito #rvrenovation #rvremodel
*Disclaimer*
The opinions expressed in our videos are our own or from a contributor. Before taking on any project or making a large purchase, we recommend you do your own research and consult a professional for advice. We are NOT liable for any damage to your RV or injury incurred as a result of following our tips, advice or instructions. We are not RV professionals or certified technicians. We are simply RV owners who work on our own RVs and have a desire to share what we learn with others. Be responsible and know your limits.
*Affiliate Disclosure*
This video may include links to merchants with affiliate programs who pay us a commission on purchases made or actions taken after clicking the link. We are a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases.
