Uploaded November 2025 | Updated November 2026, 3 hours ago
homebuildingandrepairs.com/stairs/index.html - In this video, I demonstrate another method for laying out and building concrete stairs between two fixed points ,even if the upper and lower walkways are offset or at an angle. Using the popular "guide board" method, I walk you through the entire process of calculating your steps without complex math, ensuring your risers and treads meet local building codes.
What you will learn in this video:
The Guide Board Method: How to use a simple straight edge to bridge two fixed levels and determine your stair layout.
Stair Math Made Simple: How to measure the diagonal distance and divide it into equal units (using 12" as a base) to find the perfect number of steps.
Code Compliance: Tips on checking tread depth and riser height to ensure you stay within the 3/8-inch variance allowance.
Formwork Tips: How to position your riser boards and use screws for easy adjustments.
Concrete Mix Formulas: A detailed breakdown of the ingredients needed for 2500 PSI, 3000 PSI, and 4000 PSI mixes (Cement, Sand, Gravel, and Water ratios).
Monolithic vs. Multi-Pour: Why pouring your stairs in one single "monolithic" pour offers superior strength, load distribution, and aesthetics compared to pouring in sections.
Whether you are a mason, an apprentice, or a DIYer, this guide provides the math and the methods to get the job done right.
Visit our website for an organized list of our videos and more building code resources.
homebuildingandrepairs.com/stairs/index.html - In this video, I demonstrate another method for laying out and building concrete stairs between two fixed points ,even if the upper and lower walkways are offset or at an angle. Using the popular "guide board" method, I walk you through the entire process of calculating your steps without complex math, ensuring your risers and treads meet local building codes.
What you will learn in this video:
The Guide Board Method: How to use a simple straight edge to bridge two fixed levels and determine your stair layout.
Stair Math Made Simple: How to measure the diagonal distance and divide it into equal units (using 12" as a base) to find the perfect number of steps.
Code Compliance: Tips on checking tread depth and riser height to ensure you stay within the 3/8-inch variance allowance.
Formwork Tips: How to position your riser boards and use screws for easy adjustments.
Concrete Mix Formulas: A detailed breakdown of the ingredients needed for 2500 PSI, 3000 PSI, and 4000 PSI mixes (Cement, Sand, Gravel, and Water ratios).
Monolithic vs. Multi-Pour: Why pouring your stairs in one single "monolithic" pour offers superior strength, load distribution, and aesthetics compared to pouring in sections.
Whether you are a mason, an apprentice, or a DIYer, this guide provides the math and the methods to get the job done right.
Visit our website for an organized list of our videos and more building code resources.










