Uploaded May 2019 | Updated September 2026, 2 weeks ago
Hy There,
My coworker wanted to fly an RC plane, so he bought the good starter plane multiplex easy glider 4 kit, but he took the cheapest kit version, so without a transmitter, motors, batteries and everything, all he got is model and hardware to finish them.
He asked me if I could order all the missing components and made the plane flying.
Somewhere 7 years have passed since my last build of RC aircraft, so I enjoyed this project very much.
Components i used:
(no affiliate links here)
Multiplex Easy glider 4 KIT:
https://www.der-schweighofer.si/BK-KIT-EasyGlider-4-1800-mm-a219016?gclid=CjwKCAjw8e7mBRBsEiwAPVxxiJLaSqh2BGJagMdTdZPEmfulolOFVQ-1CFKVcNRDQUmL4SJ_YffGsBoCedEQAvD_BwE
Motor, EMAX GT2215-09 1180KV (almost enough to pull plane in vertical):
banggood.com/EMAX-GT2215-09-1180KV-Outrunner-Brushless-Motor-For-RC-Models-p-1052362.html?rmmds=myorder&cur_warehouse=CN
Propeller, Mayatech 1060 10*6 Inch:
banggood.com/Mayatech-1060-106-Inch-Nylon-Folding-Propeller-Blade-for-RC-Airplane-p-1154317.html?rmmds=myorder&cur_warehouse=CN
2x servo for elevator and rudder, HobbyKing™ HK15148B Digital Servo 2.8kg / 0.14sec / 19g
hobbyking.com/en_us/hobbykingtm-hk15148b-digital-servo-2-8kg-0-14sec-19g.html
2x servo for ailerons, HobbyKing™ HK15178B Digital Servo MG 1.0kg / 0.10sec / 13.4g
hobbyking.com/en_us/hobbykingtm-hk15178b-digital-servo-mg-1-5kg-0-08sec-13-5g.html
ESC, TURNIGY Plush 30amp Speed Controller w/BEC:
hobbyking.com/en_us/turnigy-plush-30amp-speed-controller.html
2x battery, ZIPPY Flightmax 2200mAh 3S1P 25C
hobbyking.com/en_us/zippy-flightmax-2200mah-3s1p-25c.html
Connectors, Nylon XT60 Connectors Male/Female (5 pairs) GENUINE
hobbyking.com/en_us/nylon-xt60-connectors-male-female-5-pairs-genuine.html
Charger, iMAX B6 80W 6A Lipo Battery Balance Charger:
banggood.com/IMAX-B6-80W-6A-Lipo-Battery-Balance-Charger-with-Power-Supply-Adapter-p-1401686.html?rmmds=myorder&ID=47184&cur_warehouse=CN
All together is cost about 250€ but with serious equpment, if he bought a RTR version of that plane it will cost about 200€, but he got shitty transmitter with and also shitty charger, with this transmitter and charger is gate to rc models are open, when he want to buy a second plane all he need is another reaceiver and bind it with frsky modul into futaba, also charger is good enough for a beginneras and can charge almost every type of cells.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: NSC
Track: Last Heroes - Dimensions [NCS Release] Music provided by NoCopyrightSounds. Watch: youtu.be/ZPuvoDZj2hM Free Download / Stream: ncs.io/DimensionsYO
Hy There,
My coworker wanted to fly an RC plane, so he bought the good starter plane multiplex easy glider 4 kit, but he took the cheapest kit version, so without a transmitter, motors, batteries and everything, all he got is model and hardware to finish them.
He asked me if I could order all the missing components and made the plane flying.
Somewhere 7 years have passed since my last build of RC aircraft, so I enjoyed this project very much.
Components i used:
(no affiliate links here)
Multiplex Easy glider 4 KIT:
https://www.der-schweighofer.si/BK-KIT-EasyGlider-4-1800-mm-a219016?gclid=CjwKCAjw8e7mBRBsEiwAPVxxiJLaSqh2BGJagMdTdZPEmfulolOFVQ-1CFKVcNRDQUmL4SJ_YffGsBoCedEQAvD_BwE
Motor, EMAX GT2215-09 1180KV (almost enough to pull plane in vertical):
banggood.com/EMAX-GT2215-09-1180KV-Outrunner-Brushless-Motor-For-RC-Models-p-1052362.html?rmmds=myorder&cur_warehouse=CN
Propeller, Mayatech 1060 10*6 Inch:
banggood.com/Mayatech-1060-106-Inch-Nylon-Folding-Propeller-Blade-for-RC-Airplane-p-1154317.html?rmmds=myorder&cur_warehouse=CN
2x servo for elevator and rudder, HobbyKing™ HK15148B Digital Servo 2.8kg / 0.14sec / 19g
hobbyking.com/en_us/hobbykingtm-hk15148b-digital-servo-2-8kg-0-14sec-19g.html
2x servo for ailerons, HobbyKing™ HK15178B Digital Servo MG 1.0kg / 0.10sec / 13.4g
hobbyking.com/en_us/hobbykingtm-hk15178b-digital-servo-mg-1-5kg-0-08sec-13-5g.html
ESC, TURNIGY Plush 30amp Speed Controller w/BEC:
hobbyking.com/en_us/turnigy-plush-30amp-speed-controller.html
2x battery, ZIPPY Flightmax 2200mAh 3S1P 25C
hobbyking.com/en_us/zippy-flightmax-2200mah-3s1p-25c.html
Connectors, Nylon XT60 Connectors Male/Female (5 pairs) GENUINE
hobbyking.com/en_us/nylon-xt60-connectors-male-female-5-pairs-genuine.html
Charger, iMAX B6 80W 6A Lipo Battery Balance Charger:
banggood.com/IMAX-B6-80W-6A-Lipo-Battery-Balance-Charger-with-Power-Supply-Adapter-p-1401686.html?rmmds=myorder&ID=47184&cur_warehouse=CN
All together is cost about 250€ but with serious equpment, if he bought a RTR version of that plane it will cost about 200€, but he got shitty transmitter with and also shitty charger, with this transmitter and charger is gate to rc models are open, when he want to buy a second plane all he need is another reaceiver and bind it with frsky modul into futaba, also charger is good enough for a beginneras and can charge almost every type of cells.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: NSC
Track: Last Heroes - Dimensions [NCS Release] Music provided by NoCopyrightSounds. Watch: youtu.be/ZPuvoDZj2hM Free Download / Stream: ncs.io/DimensionsYO
![Comment pick of my first Giveaway NEJE Master 20W laser engraver [+@BanggoodTV Wholesale mask program]
Hy There,
In this video i just choose the winner of my first giveaway
Congratulations James Been, you are the winner of new NEJE master 20W laser cutter/engraver
We all know heres hard time for all of us, so Banggood make wholesale program for the protective masks.
Fill the information on that link and the person from wholesale program will contact you for amount, price, shipping and other stuff
https://www.banggood.com/custlink/vDGK2iykwR
Mask:
50Pcs Disposable Mouth Face Masks Face 3-layer Respirator Mask Dust-Proof Personal Protection
US$29.99
https://www.banggood.com/custlink/Kvm328yU7j
10Pcs KN95 FFP2 3D Foldable Face Mask 4-layer Dustproof Non-woven Air Filter Breathing Protective Mask
US$29.99
https://www.banggood.com/custlink/3mv3U8YM74
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from:
Stranger Danger - Francis Preve Comment pick of my first Giveaway NEJE Master 20W laser engraver [+@BanggoodTV Wholesale mask program]](https://i.ytimg.com/vi/vBJm3pBTd7k/mqdefault.jpg)


![HILDA 260W Trimming Machine Oscillating Multi Saw from banggood [unboxing, review, first test]
Hy There,
In this video ill show you my new tool from banggood HILDA 110V/230V 260W 11000-22000rpm Trimming Machine Oscillating Multi Saw Oscillating Tools
its really great tool for the price.
Now 39% off + 15%off with coupon, thats crazy deal.
You can buy one from my affiliate link and support me to get some BG points:
https://www.banggood.com/custlink/DvmvW73cZH
(15%off coupon code: WTP15 )
HILDA Trimming Machine: https://goo.gl/16Ar7d
Electronic new arrival up to 50%off: https://goo.gl/TU9VGu
log in banggood app and enjoy 10%off app coupon: https://goo.gl/FwBe4B
Description:
HILDA 110V/230V 260W 11000-22000rpm Trimming Machine Oscillating Multi Saw Oscillating Power Tool
Specification:
Voltage 110V
Frequency 60Hz
Speed 11000-22000/min
Power 260W
Swing angle 2.8°
Size 33x14x10cm
Variable speed control 6 speed
Plug type US plug
Voltage 230V
Frequency 50Hz
Speed 11000-22000/min
Power 280W
Swing angle 2.8°
Size 33x14x10cm
Variable speed control 6 speed
Plug type EU plug
Features:
Six adjustable speed to meet different power requirement.
Removing rust from metal or smoothing rough edges and surfaces.
Suitable for polishing, grinding, cutting for wood and PVC.
Package Included:
1 x Trimming Machine
1 x Scraper
1 x Saw blade
2 x Sandpapers
1 x Sanding pad
1 x Semi-circular saw blade
2 x Carbon brush
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 4 Black
Music is from NoCopyrightSounds:
https://www.youtube.com/channel/UC_aEa8K-EOJ3D6gOs7HcyNg
Track: Jim Yosef & Alex Skrindo - Ruby [NCS Release] Music provided by NoCopyrightSounds. Watch: https://youtu.be/Np-Y8ClGgRk Free Download / Stream: http://ncs.io/RubyYO
Jim Yosef & Alex Skrindo - Passion [NCS Release]
https://www.youtube.com/watch?v=pxEKoZKpCew HILDA 260W Trimming Machine Oscillating Multi Saw from banggood [unboxing, review, first test]](https://i.ytimg.com/vi/vlAomCJuwC8/mqdefault.jpg)

![B&W Case Type 4000 for GoPro 5/6/7 + gadgets [housing, charger, battery for GPH/B]
Hy There,
In this video i wil show you my new case for my gopros.
case cost about 120€ but i think it really is worth that money.
we pay lot of money for all that cameras and equpement and than spare on a case?
Best thing here is that when you need a gopro just grab that case and you got any single thing you need into.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro + zeiss 50 macro]
GoPro 7 Black
Music is from yt audiolibrary:
Toe Jam Diamond Ortiz B&W Case Type 4000 for GoPro 5/6/7 + gadgets [housing, charger, battery for GPH/B]](https://i.ytimg.com/vi/vyO80OvpoVI/mqdefault.jpg)

![Andonstar AD407 HDMI Digital USB Microscope [unbox, review, magnification test, tear down]
Hy There,
In this video i will show you my new microscope i got to the test from Andonstar manufacturer Andonstar AD407 HDMI Digital USB Microscope.
Its a great middle class microscope, specialy like quality LCD, lens and LED light, wich doesnt make shadows.
i just miss integrated battery and led out of microscope so there wont be a need to use cables.
Andonstar on banggood:
https://www.banggood.com/custlink/KmDdl7ZJyl
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
MUSTOOL G1200 7 Digital Microscope review
https://www.youtube.com/watch?v=rVvXQPovwOA
G600 digital microscope review
https://www.youtube.com/watch?v=udOyt2wEZi4
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
Music is from: Epidemic sounds
1: ES_Lagom - Ooyy
2: ES_Search Light - Mar Vei
3: ES_Leeway - Voodulce
4: ES_Arrows - Mar Vei
5: ES_Butterfly - Lofive Andonstar AD407 HDMI Digital USB Microscope [unbox, review, magnification test, tear down]](https://i.ytimg.com/vi/xbYyh5j15lg/mqdefault.jpg)
![REFLECTA PRO gen 2 Professional industrial LED light [unbox / review / first test]
Hy There,
In this video ill show you professional industrial LED lights i instal in my new workshop
The next generation of the REFLECTA® PRO is here! REFLECTA® PRO Gen2 is now even more performing with an outstanding luminous efficacy of up to 176 lm/W! The REFLECTA PRO Gen2 LED solution is unique for its indirect illumination technology. Instead of using conventional lenses for light distribution, the product integrates the patented REFLECTA® Optics technology. The major benefit of this technology is that it improves the product’s efficiency by minimizing light loss. The reflective surface is several times bigger compared to standard lighting solutions. Indirect illumination allows the creation of pleasantly soft light, eliminating the dangerous zebra-effect, multi shadowing and high glare.
https://www.reflectaled.com/
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: epidemic sounds
1: ES_Young and Free - Honeycutts
2: ES_Shortcut to My Heart - Honeycutts
3: ES_Messed Up Again - Honeycutts
4: ES_Building Walls - Honeycutts REFLECTA PRO gen 2 Professional industrial LED light [unbox / review / first test]](https://i.ytimg.com/vi/xghTNmAWiEg/mqdefault.jpg)
![Lathe Turning Tool Holder[1010] & inserts from banggood [unbox, review, testing inserts]
Hy There,
I got new lathe tools from banggood, in this video ill try to show you how it look, test different insert on different materials, cut some thread, parting, cutting, milling and so on.
This video become way longer than i was think, so there you got some shortcut if you are only interested in a particular item.
00:26 unboxing
00:53 holders review
04:41 testing inserts that come with holders
06:46 testing Drillpro HRC45 Blue Nano inserts
08:52 testing MACHIFIT DCGT070204-AK H01 Aluminum Cutter Blade Carbide Insert
11:30 testing other holders & inserts
11:51 parting / cutting holder
13:32 testing threading tool
15:08 testing aluminium insert for milling head
You can buy these items here:
(this is my affiliate links, if you buy from that link you get cheaper, and I get a piece of cake)
7pcs 10mm Shank Lathe Turning Tool Holder Boring Bar with 7pcs VP15TF Carbide Inserts
https://www.banggood.com/custlink/mGKKSiGrHe
(use coupon code BGLATHE16 for extra 16% discount)
Drillpro 10pcs HRC45 Blue Nano DCMT070204 YBC251 Carbide Insert for SDJCR/SDNCN/SDQCR Turning Tool
https://www.banggood.com/custlink/mmmmi8KJFk
(use coupon code BGLATHE16 for extra 16% discount)
MACHIFIT 10pcs DCGT070204-AK H01 Aluminum Cutter Blade Carbide Insert Cutting Tool For CNC Turning Tools
https://www.banggood.com/custlink/mGGG89vWH1
(use coupon code BGLATHE16 for extra 16% discount)
10pcs CCGT060204-AK H01 Inserts CNC Turning Tool Inserts Used for Aluminum
https://www.banggood.com/custlink/mGGDZImJId
(use coupon code BGLATHE16 for extra 16% discount)
10pcs APKT1604PDFR-MA3 H01 Carbide Inserts Used for Aluminum Copper
https://www.banggood.com/custlink/33vm9ZGcIr
(use coupon code BGLATHE16 for extra 16% discount)
2pcs ProsKit MS-035 Solder Flux Bottle With Fine Tipped Needle
https://www.banggood.com/custlink/KGKD9ivCZZ
(use coupon code BGMS035 for extra discount)
Other videos about lathe cutting tool:
Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]
https://www.youtube.com/watch?v=Kir4lA9rs14&t=
How to make carbide insert tool holder for cutting 45° edges lathe diy
https://www.youtube.com/watch?v=gehnxhCBeg4
thread cutting toll:
https://www.youtube.com/watch?v=Kir4lA9rs14&t=
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: YT audiolibrary
Beginnings - Unicorn Heads Lathe Turning Tool Holder[1010] & inserts from banggood [unbox, review, testing inserts]](https://i.ytimg.com/vi/y0xvpKaexD8/mqdefault.jpg)
![Making of: strawberry planter
Hy There,
Weather in this corona time is so nice, that i almost cant be inside, so today i make a bit different video about how we make strawberry planter and plant them, so far it look the strawberry enjoy all that sun and water.
If you need some garden tools, or gadgets you can get it here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
garden:
https://www.banggood.com/custlink/G3KDMkHSsl
strawberry
https://www.banggood.com/custlink/DmKmqM5iQV
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Feiyu g6 plus
Music is from: YouTube Audiolibrarry:
A New Orleans Crawfish Boil - Unicorn Heads Making of: strawberry planter](https://i.ytimg.com/vi/y5BeToD8Gow/mqdefault.jpg)