Uploaded February 2021 | Updated September 2026, 2 weeks ago
In this part I start to look at the physical design of how the puzzle modules might be arranged into the box, and lay out the countdown displays into a first draft of the master controller panel. I cut this out on my laser cutter but, if you don't have access to one of them, you can still use Inkscape to create your design and print it onto a paper template that you then cut around.
Timings
---
00:00:00-00:01:50 Introduction
00:01:50-00:14:00 Laying out the components in Inkscape
00:14:00-00:19:03 Sending the design to the laser cutter with LaserGRBL
00:19:03-00:22:18 Assembling the components and testing
In this part I start to look at the physical design of how the puzzle modules might be arranged into the box, and lay out the countdown displays into a first draft of the master controller panel. I cut this out on my laser cutter but, if you don't have access to one of them, you can still use Inkscape to create your design and print it onto a paper template that you then cut around.
Timings
---
00:00:00-00:01:50 Introduction
00:01:50-00:14:00 Laying out the components in Inkscape
00:14:00-00:19:03 Sending the design to the laser cutter with LaserGRBL
00:19:03-00:22:18 Assembling the components and testing
