Building an eBike on a Budget | 3D Printed Parts and Hub Motor Conversion with DeWalt Battery @AndrewWorkshop
Building an eBike on a Budget | 3D Printed Parts and Hub Motor Conversion with DeWalt Battery  @AndrewWorkshop
Uploaded November 2024 | Updated September 2026, 2 weeks ago
I built an eBike from an old BMX bike and an Aliexpress/Amazon conversion kit. It's crazy fast and fun to ride!

Here are the parts I used (some are affiliate links but I paid for all the parts myself):
DeWalt Flex 60 Volt Battery amzn.to/40lxnD8
60 Volt Adaptor https://s.click.aliexpress.com/e/_DmnmnRr
eBike Kit from Amazon amzn.to/4e0GlZH
eBike Kit from AliExpress similar to mine https://s.click.aliexpress.com/e/_Dd1aVFJ
Harness Tape amzn.to/4hkrLiH
Soldering Iron amzn.to/3UnDSBN
Hotmelt Threaded Inserts amzn.to/48vi7FW

The kit I got from Amazon isn't available, so look for something like the one I listed above but for 60 volts, if you plan on powering it with a DeWalt battery.

Follow me on Instagram:
instagram.com/therealandreww
My website:
geckosurfboards.com
_______________________________________________________

The following affiliate links help me build the channel

Music I use: epidemicsound.com/referral/c6km4e

Camera Gear I Use to Make Videos:

Main Camera
Sony A6700 - amzn.to/474CHeK
Sigma 16mm F1.4 - amzn.to/2QorbWf (Amazing Lens)
Sigma 30mm F1.4 - amzn.to/2U0Lmy5
Sony 18-135mm F3.5-5.6 amzn.to/2Se014Y
Small Rig Cage - amzn.to/2C1r2A1

Travel and Action Cameras
Sony RX100V - amzn.to/2D5Z3SH
GoPro Hero12 Black - amzn.to/49yWhkR
GoPro Hero10 Black - amzn.to/3K4B1W8
Insta360 GO 3 - amzn.to/478dtMJ

Audio:
Rode Wireless Go 2 - amzn.to/3EpFf9F
Deity V-Mic D4 Duo Microphone - amzn.to/3jA6ALl
Rode VideoMic Pro+ - amzn.to/2D7UcQS
Rode VideoMic Micro - amzn.to/2CH7AdT
Blue Yeti USB Mic - amzn.to/2QumWsE
Building an eBike on a Budget | 3D Printed Parts and Hub Motor Conversion with DeWalt BatteryVent your EPS Surfboards! | Surfboard BuildingI Built a Performance Surf SUP | Learning to SUP SurfHow to Make a 3D Printed a SurfboardHow to Make a Surfboard - Wet Sanding, Summary and Riding Part 09How to Make a Hot Wire Foam Cutter for StyrofoamLearning to Pump Foil: My 8 Month JourneyJust Working On a SurfboardPerformance Longboard Build MontageHow to Build a Stand Up Paddle Board for Surfing | SUP SurfHow to Make a Wooden Surfboard #13: Final Sanding and PolishingDock Start Pump Foiling - Can I Pump Back? #foiling #hydrofoil #pumpfoiling
Andrew W |

Building an eBike on a Budget | 3D Printed Parts and Hub Motor Conversion with DeWalt Battery

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER