Jer Schmidt | Building a table to hold my vise @Jer_Schmidt | Uploaded January 2019 | Updated October 2024, 3 minutes ago.
Thank you for watching!
The finished table is about 865lbs (390kg). With the vise it's about 1,025lb (465kg). The steel for the frame cost $235. The top was a scrap, cut from the center of a ring, and I don't remember the exact cost but I guess $400. The vise cost more than twice as much as the table, but both should last a few lifetimes.
Support me on Patreon:
patreon.com/JerSchmidt
Thank you for watching!
The finished table is about 865lbs (390kg). With the vise it's about 1,025lb (465kg). The steel for the frame cost $235. The top was a scrap, cut from the center of a ring, and I don't remember the exact cost but I guess $400. The vise cost more than twice as much as the table, but both should last a few lifetimes.
Support me on Patreon:
patreon.com/JerSchmidt
