Vector 3D | Building a RepRap Darwin Evo 3D Printer for Josef Prusa! Part 1 @Vector3DP | Uploaded February 2024 | Updated October 2024, 25 minutes ago.
Darwin Evo is my reimagined modern version of the RepRap Darwin 3D printer that started all of modern hobbyist 3D printing. I'm doing this build for Josef Prusa, who will be making a donation to the Sanjay Mortimer Foundation to match the original donation for the first Darwin Evo. I'm sure you'll already know Josef Prusa, founder of Prusa Research. RepRap is the self replicating rapid prototyping idea, starting with Adrian Bowyer and Ed Sells with the RepRap Darwin, that hobby 3D printing and Prusa Research are founded upon.
Darwin Evo was created to raise funds for SMF, please help continue that spirit by making a donation if you're able. paypal.com/gb/fundraiser/charity/4990412
This live series will be building the printer from beginning to end as a foundation for instructions, and BOM validation and the final printer will be shipped off to Jo Prusa in Czech Republic.
You can find the full open source information, CAD, STLs and bill of materials at Printables: printables.com/model/685181-darwin-evo-3d-printer
Sponsored partly by LDO Motors and E3D whom have supplied parts for the project, and by Jo Prusa who is paying me to build printer.
Buy my designs: https://vector3d.shop
Support me Via Patreon: Patreon.com/Vector3D
Chat on Twitter: @Adam_V3D
Join the Vector 3D Discord: discord.gg/xXmuUpJhxc
Darwin Evo is my reimagined modern version of the RepRap Darwin 3D printer that started all of modern hobbyist 3D printing. I'm doing this build for Josef Prusa, who will be making a donation to the Sanjay Mortimer Foundation to match the original donation for the first Darwin Evo. I'm sure you'll already know Josef Prusa, founder of Prusa Research. RepRap is the self replicating rapid prototyping idea, starting with Adrian Bowyer and Ed Sells with the RepRap Darwin, that hobby 3D printing and Prusa Research are founded upon.
Darwin Evo was created to raise funds for SMF, please help continue that spirit by making a donation if you're able. paypal.com/gb/fundraiser/charity/4990412
This live series will be building the printer from beginning to end as a foundation for instructions, and BOM validation and the final printer will be shipped off to Jo Prusa in Czech Republic.
You can find the full open source information, CAD, STLs and bill of materials at Printables: printables.com/model/685181-darwin-evo-3d-printer
Sponsored partly by LDO Motors and E3D whom have supplied parts for the project, and by Jo Prusa who is paying me to build printer.
Buy my designs: https://vector3d.shop
Support me Via Patreon: Patreon.com/Vector3D
Chat on Twitter: @Adam_V3D
Join the Vector 3D Discord: discord.gg/xXmuUpJhxc
![Voron V2.4r2 #8 - Skirts, Panels & Trim [+ Giveaway]](https://i.ytimg.com/vi/dQECAu-Amcs/hqdefault.jpg "Voron V2.4r2 #8 - Skirts, Panels & Trim [+ Giveaway]
Livestream build of the Voron v2.4 r2 with lots of mods added on.
I need your support via Patreon here: https://www.Patreon.com/Vector3D
Buy Daylight and Califlower here: https://vector3d.co.uk/shop/
Big thanks to these companies for providing parts for my build:
LDO Motors – Stepper Motors, Linear Rails, Frame, Heater Bed Assembly, Hardware Kit
BigTreeTech - Octopus Pro and drivers, PiTFT50
OneTwo3D & Linneo - Enclosure Panels, Nevermore kit, pin removal tool, Harness Parts
You can find my full Bill of Materials and Mods list here (Go to the 2.4r2 tab): https://docs.google.com/spreadsheets/d/1pYzN66V7wXJYDLq-hIjh68M1iE4dBsXfMXmNHkT5wbw/edit?usp=sharing
Twitter: @Adam_V3D
Join the Vector 3D Discord: https://discord.gg/xXmuUpJhxc
Vector 3D Shop: https://vector3d.shop
Tools:
Wera Hex Keys: https://amzn.to/3gIYdNV
Wera Ratchet and Socket Set: https://amzn.to/3gH0OrY
Knipex Cutter: https://amzn.to/2Wylf2M
Ifixit Tool kit: https://amzn.to/3BdJXES
Wire Stripper Tool: https://amzn.to/3kC7hoW
3M Applicator Tool: https://amzn.to/3jqc8ud")
