Uploaded June 2017 | Updated September 2026, 3 hours ago

---

How to build a drone?
Building your own drone using economic components and just wood for the frame is not complicated. This will be the beginner's best racing drone to start with, you will learn all the basics you need to know building this, let's get our hands dirty!

Subscribe:
goo.gl/zKQ706

Instagram
instagram.com/joyplanes


Donwload the drone drawing here: joyplanes.com/go/drone1

********************************************************************
🚩List of components🚩
Motors I used X4: goo.gl/7fjvZi
Other reconmended motors: goo.gl/Bg2z45 goo.gl/YokCfX amzn.to/2s5vx6G
ESC (Electronic speed controllers) I used X4: goo.gl/SnBWJ3
Other ESC's: goo.gl/TTPMZr amzn.to/2ttne8K goo.gl/q6huKi amzn.to/2u2Apef
Power distribution board (PDB) recomended: goo.gl/Xx9jQU amzn.to/2s5JykP
PDB I used: goo.gl/pnHpmx
Flight controller I used: goo.gl/ubvJkn
Recomended Flight controllers: goo.gl/Jqhv2k amzn.to/2s5DcSn goo.gl/DgTbbp goo.gl/EydXqp
Receiver I used (only for FRSKY): goo.gl/wns9Ex
My radio: goo.gl/oaBV8t
Recomended radio and receiver for beginners: joyplanes.com/go/r2
Battery 3S LiPo between 900 and 1500 mAh (I recomend buying 2): goo.gl/MHMkpB amzn.to/2ttj0Oz
Battery charger: goo.gl/iFkAW1 goo.gl/UykZhZ
Standoffs: goo.gl/xSCkXN
M3 Bolts: goo.gl/dNxY9z
Propellers: goo.gl/wjDZBr
Zipties: goo.gl/E7WuUz
Battery strap: goo.gl/fYCqab
Soldering kit: goo.gl/tZR5c6
********************************************************************

This is a DIY drone using very cheap but durable components, I hope you enjoy building it and flying it.

In the next video, we are going to put an FPV camera on it to be able to race and make crazy maneuvers.