Build Your CNC System Now, Upgrade to a 5th Axis Later @corvetteguy50
Build Your CNC System Now, Upgrade to a 5th Axis Later  @corvetteguy50
Uploaded November 2026 | Updated November 2026, 3 hours ago
Check out this Master Edition version of my 5th axis back plate. The options are endless for customizing this system to fit your needs. This one is not yet listed, so please message me if you need it - storm2313@gmail.com

Some products used and discussed in the video:

Standard 5th axis kit - ebay.com/itm/137868872747
20/5 DS Flexion cable - ebay.com/itm/145871539787
Pre-wired GX-16 3-pin - ebay.com/itm/144276695477
Standard controller - ebay.com/itm/131506845680

🔧 For vetted components, with validated support please visit my store: ebay.com/str/edealersdirect

#CNC #CNCrouter #DIYCNC #CNCfail #IndustrialAutomation #CNCmachining #Engineering

Please do your own research before making any purchase for production robotic components. When in doubt ask, and I highly recommend messaging a vendor to test their response time.

Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.

Standalone kits:
Essentials Standalone Package - ebay.com/itm/137509672457
Standalone with ETH and G540 - ebay.com/itm/137515639170
Plasma Standalone Package with THC - ebay.com/itm/137525808956?

ETH-Compact Ethernet Controller & THC Sensor Module
ebay.com/itm/146755320152

SMCU motion controller driver
ebay.com/itm/146206341057

Standard Gecko G540 motion controller
ebay.com/itm/142506267150

20' 16/4 double-shielded spindle cable
ebay.com/itm/131899174942

Here's a link to my UC-400 Ethernet Turnkey Controller package ebay.com/itm/144862296429

CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
ebay.com/itm/133300288430

CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) ebay.com/itm/143650166809

CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter ebay.com/itm/134192466153
Build Your CNC System Now, Upgrade to a 5th Axis LaterSoldering Tips to Get Shiny ConnectionsUnboxing the UC400: Ethernet Controller & LPH 26When Soft Limits Can Save You $$See My OmniVise System In ActionPart 1 - The Prep Work That Makes or Breaks a Spindle CableKCD4 Switch Wiring FixHow to work with double-shielded CNC cableE Stop Fault Mode & Brake System SetupOne E-Stop, Two Jobs: Faulting the G540 and Braking the Z AxisHow to Strip Double Shielded Cable Without Damaging ItWhy OEM Filament is KING for Your 3D Printer!
Corvetteguy50 |

Build Your CNC System Now, Upgrade to a 5th Axis Later

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER