Uploaded October 2021 | Updated November 2026, 2 days ago
One of the most common Beompton Electric questions we get asked (after .. are there any other bags yet?) is ....
Is there a brighter light available for my Brompton Electric
The official answer is no
The complexity with the Brompton Electric is that the power goes through the front light and back out to power the rear light
It seems that most electric bikes have two feeds - one for front and one for rear - so the front light must have an input AND output
We found one (two actually) from Bush and Muller - so thought we would give it a try
We wouldn't recommend you try this - as we are not sure what it will do to the warranty
While making the video we discovered it was very long and the bit in the middle was a bit boring! But necessary if you want to see all the steps - so here are the time stamps for the three parts, so you can skip what you are not interested in
0:00 | Intro
3:00 | Light installation
13:57 | Light comparison
16:33 | End
16:57 | Outtakes
It took a while ... we had to find the correct fixings for the cable and to plug into the front carrier block (once the wires are removed - the connector is not-re-useable) - so we had to order these
We also had to find the right lights - so far we found 2 alternatives
Then we had to try it and compare!
Let us know what you think
One of the most common Beompton Electric questions we get asked (after .. are there any other bags yet?) is ....
Is there a brighter light available for my Brompton Electric
The official answer is no
The complexity with the Brompton Electric is that the power goes through the front light and back out to power the rear light
It seems that most electric bikes have two feeds - one for front and one for rear - so the front light must have an input AND output
We found one (two actually) from Bush and Muller - so thought we would give it a try
We wouldn't recommend you try this - as we are not sure what it will do to the warranty
While making the video we discovered it was very long and the bit in the middle was a bit boring! But necessary if you want to see all the steps - so here are the time stamps for the three parts, so you can skip what you are not interested in
0:00 | Intro
3:00 | Light installation
13:57 | Light comparison
16:33 | End
16:57 | Outtakes
It took a while ... we had to find the correct fixings for the cable and to plug into the front carrier block (once the wires are removed - the connector is not-re-useable) - so we had to order these
We also had to find the right lights - so far we found 2 alternatives
Then we had to try it and compare!
Let us know what you think





![Brompton Metro Pouch - again!!!!!!!
3rd time lucky?
We made a short video on the new Brompton Metro Pouch - we missed testing if the bike would fold OK with the pouch on the handlebars
Next up we made a video on the Brompton Metro Backpack - we did a quick test of the folding with the Metro pouch here - and showed it doesnt fold when on the handlebars ... facing forwards - but didnt think of facing backwards
So - here we go again
We also didnt feel so comfortable carrying things in the pouch when mounted on the handlebars
Now we learned how to fit it better - so thought we would share
We have also tried it mounted on a saddle on a telescopic seatpost - it doesnt work so well - as the upper portion of the [telescopic] seatpost is aluminium - so the magnet doesnt stock and the bag just flaps about annoyingly Brompton Metro Pouch - again!!!!!!!](https://i.ytimg.com/vi/rLsosqS-svk/mqdefault.jpg)




