Uploaded September 2026 | Updated November 2026, 2 days ago
I broke an m4 tap off in this part. Desperate to continue on with the job I came up with this idea. Using an old 12v battery charger, drill press, brazing rod and some WD40 it actually worked.
#diy #edm # sparkeroder
I broke an m4 tap off in this part. Desperate to continue on with the job I came up with this idea. Using an old 12v battery charger, drill press, brazing rod and some WD40 it actually worked.
#diy #edm # sparkeroder










