Uploaded August 2019 | Updated September 2026, 19 hours ago

---

Learn to create braided hoop earrings in this beginner friendly wire wrapping tutorial!

Wire used: 22 gauge round dead soft (I purchase mine from RioGrande.com)
For 1.5" diameter hoops use 6 strands of 7 inches per earring
For 1" diameter hoops, use 6 strands of 5 inches per earring

Tools Used:

Chain Nose Pliers (Click here for the ones I used): amzn.to/2z1nxcj

Round Nose Pliers, (Click here for the ones I used): amzn.to/2FlJpVj

Flush Cutters, (Click here for the ones I used): amzn.to/2DAo8Wd

Steel bench block: amzn.to/2PQohL3

Jeweler’s hammer: amzn.to/2Dh7vxQ

Ruler: amzn.to/2DleG82

Ring Mandrel: amzn.to/2WN3yaA (optional)

Masking tape or painters tape (optional): amzn.to/2LGZE1p


Etsy: etsy.com/shop/FantasiaElegance
Facebook: facebook.com/Fantasia-Elegance-187455431290486
Instagram: @fantasia.elegance (instagram.com/fantasia.elegance/)


Thanks for watching, and happy crafting!

Music:

“Prelude No. 3” by Chris Zabriskie
freemusicarchive.org/music/Chris_Zabriskie/Preludes/03_-_Prelude_No_3
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) creativecommons.org/licenses/by/4.0

“Prelude No. 23” by Chris Zabriskie http://freemusicarchive.org/music/Chr...
Licensed under Creative Commons Attribution 4.0 International License (CC BY 4.0) http://creativecommons.org/licenses/b...
No modifications made to music track: excerpt only.

**Note: I may receive some compensation from purchases made through Amazon affiliate links.