Bouldering: 3. Boulder Pad Placement and Spotting | Climbing Tech Tips @ClimbingTechTips
Bouldering: 3. Boulder Pad Placement and Spotting | Climbing Tech Tips  @ClimbingTechTips
Uploaded February 2018 | Updated November 2026, 12 hours ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! Pop Quiz: How many bouldering pad placement and spotting errors can you count, towards the end of this video?

We have talked about the importance of crash pads, pad positioning, and pad leveling. Now let’s take a deeper look at proper pad placement and spotting during a climb.

Placement - Once the ground has been cleared of tripping hazards or falling hazards, the pads are positioned beneath the fall zone, and leveled to remove gaps between the pads. Stack pads as needed.

Spotting - The spotter can now get in position to spot (i.e. help protect) the climber. If the climber is using pads to help reach the start, the spotter will quickly reposition the pad(s) once the climber is up on the boulder problem. Once the climber begins bouldering, the spotter should position themselves slightly behind the climber so that, were the climber to fall, they won’t fall on the spotter! The spotter should be free of the fall zone, but still able to help direct the climber’s fall to the center of the pad.

While spotting, it’s important to also consider factors such as:

- Gently cradling the head and neck
- Guarding against dangerous rock protrusions
- Being aware of severe ground angles


We hope you found this video helpful.

Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Bouldering: 3. Boulder Pad Placement and Spotting | Climbing Tech TipsGym Top Rope Climbing: 5. How to Top Rope Belay | Climbing Tech TipsYoga & Stretching for Climbing: 15. Stretches for Crack Climbing | Climbing Tech TipsAlpine & Mountaineering: 7. Efficient Snow Travel | Climbing Tech TipsAid Climbing & Big Walls: 6. Jumaring Basics | Climbing Tech TipsGym Lead Climbing: 12. Soft Catch Technique | Climbing Tech TipsTraditional Climbing: 4. Toe Jamming | Climbing Tech TipsTraditional Climbing: 17. Combining Optimal Anchor Placements w/ Marginal Gear | Climbing Tech TipsBasic & Intermediate Outdoor Climbing: 10. Direct Belay using an Auto-Block DeviceClimbing Movement: 5. Jugs Hold | Climbing Tech TipsClimbing Movement: 20. The Importance of Leaning | Climbing Tech TipsSport Climbing: 7. Soft Catches | Climbing Tech Tips
Climbing Tech Tips |

Bouldering: 3. Boulder Pad Placement and Spotting | Climbing Tech Tips

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER