Uploaded July 2020 | Updated September 2026, 2 weeks ago
Learn how to make your own custom board and batten / wainscoting accent wall! If you have textured walls like I do, I show you how to get a smooth, professional finish. Check out the list of tools and lumber that I use below. I grew up a carpenters daughter and later joined the Army National Guard as carpenter. I’m obsessed with DIY projects and everything home related. Please subscribe if you’re enjoying these videos! 😊
**Check out the full tutorial for this project on my blog: homewithstefani.com/board-and-batten
COME SAY HI!
Blog: homewithstefani.com
Instagram: instagram.com/homewithstefani
Pinterest: pinterest.com/HomeWithStefani
RUG (Amazon): bit.ly/30zqQEm
TOOLS FOR THIS PROJECT:
Miter Saw or: bit.ly/2OmGxcE
Circle Saw: bit.ly/2Y7zPzf
Brad Nailer with 1 1/4″ Brad Nails: bit.ly/2ZpUSLw
Multi tool (If you need to cut baseboard): bit.ly/38l6seH
Jig saw (if you need to notch out an outlet): bit.ly/38VKjTJ
Tape Measure: bit.ly/30sUNGi
Speed Square
Utility knife
Pry bar
Liquid nails
Wood Filler
Putty Knife
Paintable caulk & caulk gun
Sanding Paper
Hammer
Nail set: bit.ly/32ABe1j
Safety glasses: bit.ly/2WGRZ7s
Primer / Paint (Creek Bend by Behr)
Painting supplies
Painters tape
LUMBER:
(2) 1" x 4" x 6' (Baseboard trim): bit.ly/2WDgx0R
(7) 1" x 3" x 8' (Vertical supports/top horizontal trim & ledge): bit.ly/32DgGWc
(3) 1/8" Hardboard 4' x 8' sheet (To cover textured walls): bit.ly/32zAWYE
BUSINESS INQURIES: homewithstefani@thestation.io
MUSIC:
Tuscany by Anja Kotar
Spotify: open.spotify.com/artist/5a71BOwXAojkstqJFlg7GT
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you. Thank you for the support!
Learn how to make your own custom board and batten / wainscoting accent wall! If you have textured walls like I do, I show you how to get a smooth, professional finish. Check out the list of tools and lumber that I use below. I grew up a carpenters daughter and later joined the Army National Guard as carpenter. I’m obsessed with DIY projects and everything home related. Please subscribe if you’re enjoying these videos! 😊
**Check out the full tutorial for this project on my blog: homewithstefani.com/board-and-batten
COME SAY HI!
Blog: homewithstefani.com
Instagram: instagram.com/homewithstefani
Pinterest: pinterest.com/HomeWithStefani
RUG (Amazon): bit.ly/30zqQEm
TOOLS FOR THIS PROJECT:
Miter Saw or: bit.ly/2OmGxcE
Circle Saw: bit.ly/2Y7zPzf
Brad Nailer with 1 1/4″ Brad Nails: bit.ly/2ZpUSLw
Multi tool (If you need to cut baseboard): bit.ly/38l6seH
Jig saw (if you need to notch out an outlet): bit.ly/38VKjTJ
Tape Measure: bit.ly/30sUNGi
Speed Square
Utility knife
Pry bar
Liquid nails
Wood Filler
Putty Knife
Paintable caulk & caulk gun
Sanding Paper
Hammer
Nail set: bit.ly/32ABe1j
Safety glasses: bit.ly/2WGRZ7s
Primer / Paint (Creek Bend by Behr)
Painting supplies
Painters tape
LUMBER:
(2) 1" x 4" x 6' (Baseboard trim): bit.ly/2WDgx0R
(7) 1" x 3" x 8' (Vertical supports/top horizontal trim & ledge): bit.ly/32DgGWc
(3) 1/8" Hardboard 4' x 8' sheet (To cover textured walls): bit.ly/32zAWYE
BUSINESS INQURIES: homewithstefani@thestation.io
MUSIC:
Tuscany by Anja Kotar
Spotify: open.spotify.com/artist/5a71BOwXAojkstqJFlg7GT
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you. Thank you for the support!
