Uploaded November 2013 | Updated September 2026, 1 week ago
Follow up video how to configure two HM-10 (and higher) modules to communicate over Bluetooth. The two base modes of the HM firmware are explained:
1. Transmission mode sending all incoming UART data to the UART of the other module
2. Remote control mode sensing and controlling the IO pins of the other module
IMPORTANT NOTE: You might need to send AT+CLEAR to pair the master to another HM-10 module, once it was paired.
Tune in for some practical mini projects using this features and more videos that will spot on implementing own firmware.
Follow up video how to configure two HM-10 (and higher) modules to communicate over Bluetooth. The two base modes of the HM firmware are explained:
1. Transmission mode sending all incoming UART data to the UART of the other module
2. Remote control mode sensing and controlling the IO pins of the other module
IMPORTANT NOTE: You might need to send AT+CLEAR to pair the master to another HM-10 module, once it was paired.
Tune in for some practical mini projects using this features and more videos that will spot on implementing own firmware.
![Cheap USB Host Microcontroller [CH559, ESP32, HID]](https://i.ytimg.com/vi/po3FBdY0GS4/mqdefault.jpg "Cheap USB Host Microcontroller [CH559, ESP32, HID]
This video shows an affordable way to add USB support to maker projects.
$2 for 10 PCBs (Any Color): https://jlcpcb.com (sponsor)
The CH559 is a 8051 architecture based microcontroller that has built in dual USB Hosts. This allows to interface generic Keyboards, Mice, MIDI devices and in my case gamepads. I added this chip as an add on to my ESP32 based game console to replace the SNES controllers by cheap generic ones. The communications is handled over UART which can be done by both ends in hardware. There still is some work to do but you can try it out already. Have fun!
CH559 firmware sources & compiler:
https://github.com/atc1441/CH559sdccUSBHost
Aarons video:
https://youtu.be/Th88RiSmj2w
Links to my game using the USB:
https://github.com/bitluni/GameWing2USB
CH559:
https://link.bitluni.net/ch559
Links to the parts (affiliate links):
USB SNES Gamepad ($2.70 shipped):
USB Fake PS3 Controller ($3.30 shipped):
https://aliexpress.bitluni.net/usbPs3
https://aliexpress.bitluni.net/usbSnes
Set of Tweezers ($3):
https://aliexpress.bitluni.net/tweezers
Flux ($3 for two):
https://aliexpress.bitluni.net/flux
Ultrasonic Cleaner(~$50):
https://aliexpress.bitluni.net/cleaner
Soldering Mat ($9):
https://aliexpress.bitluni.net/mat
My camera and lens (4k 60fps):
https://amazon.bitluni.net/gh5
plz share :-)
Check out my Tindie store to get some of my creations:
https://www.tindie.com/stores/bitluni
Consider supporting my lab for some extras and frequent updates:
https://github.com/sponsors/bitluni
https://www.patreon.com/bitluni
https://paypal.me/bitluni
Twitter: @bitluni
reddit: u/bitluni
#electronics #diy #maker")
![ESP32 VGA Beginner Tutorial [Arduino Library ESP32Lib]](https://i.ytimg.com/vi/qJ68fRff5_k/mqdefault.jpg "ESP32 VGA Beginner Tutorial [Arduino Library ESP32Lib]
This is a beginner tutorial how to set up VGA with the least effort on the ESP32. My new Arduino library makes ist super simple to get started and provides many examples that explain the capabilities. The performance boost is insane compared to older implementations.
Hardware (affiliate links):
My ESP32 VGA Shield: https://link.bitluni.net/vga
ESP32 MINI KIT (~$4.90) http://s.click.aliexpress.com/e/8fMcA6M
LOLIN32 (~$4.92) http://s.click.aliexpress.com/e/byshmypE
TTGO ESP32 ($4.90+) http://s.click.aliexpress.com/e/bzgFPjVe
My favorite multimeter:
US https://amzn.to/2Ne7WvW
DE https://amzn.to/2S72ZWv
Software:
Arduino IDE - https://www.arduino.cc/en/main/software
Link for the Boards Manager for ESP32 support. This need to be added to the preferences:
https://dl.espressif.com/dl/package_esp32_index.json
The link to my library with some extra documentation:
https://github.com/bitluni/ESP32Lib
plz share :-)
Consider supporting my lab on Patreon for some extras and frequent updates:
https://www.patreon.com/bitluni
Im also thankful for any donation on PayPal:
https://paypal.me/bitluni
Twitter: @bitluni
reddit: r/bitluni
#ESP32Lib #Arduino #IoT")
