Uploaded January 2022 | Updated November 2026, 3 hours ago
This is a quick little tutorial for the several people who requested it showing how to use a standard Arduino as a BlHeli USB programmer. It takes all of 2 minutes once you know what to do, it's super easy and won't blow anything up if you get it wrong. Try it!
This process will also work to make your Arduino able to reprogram AM32 ESCs, just keep in mind you need to use the AM32 configurator with AM32 ESCs once the Arduino is flashed using BlHeliSuite32.
BlHeli ESCs work with almost any small to midsize brushless motor for RC drones, planes, quads, multicopters, cars, boats, etc. Any 3 phase brushless motor that is sized correctly for your ESC with the right settings should work.
WARNING - AS OF JUNE 2024 BLHELI32 ORGANIZATION HAS STOPPED OPERATING AND SUPPORTING THE FIRMWARE! More details here: oscarliang.com/end-of-blheli_32
Changing settings can still be done, but you will never be able to update to a later firmware version. Some of the links below will no longer work.
Blheli Programming Tutorial youtu.be/pfMg5RVenic
Download the software here: github.com/bitdump/BLHeli - Not sure if this link will work in 2025
BlHeli ESC Programming/Settings Tutorial: youtu.be/pfMg5RVenic
Just 'Cuz Robotics Website: justcuzrobotics.com
Just 'Cuz Store: justcuzrobotics.com/shop
Instagram: @JustCuzRobotics
instagram.com/justcuzrobotics
@bloodsport_battlebot
instagram.com/bloodsport_battlebot
@retrograde_battlebot
instagram.com/retrograde_battlebot
Bloodsport/BnS Facebook Page:
facebook.com/bnsrobotics
#CombatRobotics #BlHeli
00:00 - Intro
00:50 - Pins needed
02:13 - Power the ESC
02:43 - BlHeli Bootloader to Arduino
03:56 - Showing it worked!
04:29 - Save and load
05:05 - Flash Latest Firmware
06:00 - Outro
This is a quick little tutorial for the several people who requested it showing how to use a standard Arduino as a BlHeli USB programmer. It takes all of 2 minutes once you know what to do, it's super easy and won't blow anything up if you get it wrong. Try it!
This process will also work to make your Arduino able to reprogram AM32 ESCs, just keep in mind you need to use the AM32 configurator with AM32 ESCs once the Arduino is flashed using BlHeliSuite32.
BlHeli ESCs work with almost any small to midsize brushless motor for RC drones, planes, quads, multicopters, cars, boats, etc. Any 3 phase brushless motor that is sized correctly for your ESC with the right settings should work.
WARNING - AS OF JUNE 2024 BLHELI32 ORGANIZATION HAS STOPPED OPERATING AND SUPPORTING THE FIRMWARE! More details here: oscarliang.com/end-of-blheli_32
Changing settings can still be done, but you will never be able to update to a later firmware version. Some of the links below will no longer work.
Blheli Programming Tutorial youtu.be/pfMg5RVenic
Download the software here: github.com/bitdump/BLHeli - Not sure if this link will work in 2025
BlHeli ESC Programming/Settings Tutorial: youtu.be/pfMg5RVenic
Just 'Cuz Robotics Website: justcuzrobotics.com
Just 'Cuz Store: justcuzrobotics.com/shop
Instagram: @JustCuzRobotics
instagram.com/justcuzrobotics
@bloodsport_battlebot
instagram.com/bloodsport_battlebot
@retrograde_battlebot
instagram.com/retrograde_battlebot
Bloodsport/BnS Facebook Page:
facebook.com/bnsrobotics
#CombatRobotics #BlHeli
00:00 - Intro
00:50 - Pins needed
02:13 - Power the ESC
02:43 - BlHeli Bootloader to Arduino
03:56 - Showing it worked!
04:29 - Save and load
05:05 - Flash Latest Firmware
06:00 - Outro










