Uploaded August 2022 | Updated November 2026, 2 days ago
So, this one is working. I had a problem with one of the other motors with the signal output/input. I swapped the motor out with a 12000RPM and set it to approximately 6250 and applied pressure with my finger to slow it down. Looks like it is keeping a fairly constant speed according to the Hall output into the tachometer. I have a feeling that the tachometer isn't super accurate but we're heading in the right direction.
So, this one is working. I had a problem with one of the other motors with the signal output/input. I swapped the motor out with a 12000RPM and set it to approximately 6250 and applied pressure with my finger to slow it down. Looks like it is keeping a fairly constant speed according to the Hall output into the tachometer. I have a feeling that the tachometer isn't super accurate but we're heading in the right direction.










