Uploaded May 2022 | Updated November 2026, 3 hours ago
The Yamaha WR450F is one of the most popular off-road enduros thanks to its reliability, technology, excellent suspension and rich stock equipment. A standard tank is often not enough for a full trip, so everyone takes a canister or a bottle of gasoline with them. An oversized tank can also be a solution.
We installed an IMS tank, which is 2.5 liters larger than the standard one. This tank also fits the WR250F, YZ450F and YZ250F. The seat needs to be cut to install the tank, and we do not recommend using a template because it will create too much clearance between the tank and the seat. It is better to cut off a centimeter less — this will make it as tight as possible.
Also, the fuel pump mounting bolts from the IMS kit do not fit the 2021 WR450F because they have a bigger diameter and are too short. We used OEM bolts with washers and spring washers to reduce the thread length to fit the holes in the IMS tank, as they are not deep enough.
00:00 Intro.
00:23 Gas tank removal.
01:52 Fuel pump installation.
03:21 New IMS tank installation.
05:17 OEM seat cut.
Buy the IMS tank: https://stuntexshop.ru/offroad/offroad_zapchasti-i-tiuning/bak-uvelichennogo-obema-dlya-mototsikla
More enduro videos: https://stuntex.ru/en/magazine
#stuntex #stuntexshop #enduro #wr450f #ims
The Yamaha WR450F is one of the most popular off-road enduros thanks to its reliability, technology, excellent suspension and rich stock equipment. A standard tank is often not enough for a full trip, so everyone takes a canister or a bottle of gasoline with them. An oversized tank can also be a solution.
We installed an IMS tank, which is 2.5 liters larger than the standard one. This tank also fits the WR250F, YZ450F and YZ250F. The seat needs to be cut to install the tank, and we do not recommend using a template because it will create too much clearance between the tank and the seat. It is better to cut off a centimeter less — this will make it as tight as possible.
Also, the fuel pump mounting bolts from the IMS kit do not fit the 2021 WR450F because they have a bigger diameter and are too short. We used OEM bolts with washers and spring washers to reduce the thread length to fit the holes in the IMS tank, as they are not deep enough.
00:00 Intro.
00:23 Gas tank removal.
01:52 Fuel pump installation.
03:21 New IMS tank installation.
05:17 OEM seat cut.
Buy the IMS tank: https://stuntexshop.ru/offroad/offroad_zapchasti-i-tiuning/bak-uvelichennogo-obema-dlya-mototsikla
More enduro videos: https://stuntex.ru/en/magazine
#stuntex #stuntexshop #enduro #wr450f #ims










