Uploaded February 2016 | Updated November 2026, 4 days ago
Jaguar Mark 2 fuel tank, stainless steel 316L
stotfoldengineers.co.uk
Stotfold Engineering Company Limited
The Old Forge, Rose Lane, Biggleswade SG18 0JT
Jaguar Mark 2 fuel tank, stainless steel 316L
stotfoldengineers.co.uk
Stotfold Engineering Company Limited
The Old Forge, Rose Lane, Biggleswade SG18 0JT
![Jaguar Mk2 - HS8 SU Carburettors with manual choke
Jaguar Mark 2 - twin HS8 SU Carburettors with manual choke conversion
This video shows the installation of twin HS8 SU Carburettors on a standard Jaguar Mark 2 inlet manifold. The HS8 carbs came from a Jaguar XJ6 Series 1. The XJ6 was fitted with an AED unit to provide extra fuel for cold starting. These AED units were highly unreliable and inefficient in shutting off when the engine had reached running temperature, leading to excessively high fuel use. My preference was to use the HS8 carbs, instead of the Jaguar 420 HD8 carbs with electric choke or Jaguar XJ6 Series 2 HIF44 SU carbs with AED units, because they are the easiest to adapt for manual choke operation. I copied the choke lever set-up and operation found on the original Jaguar Mark 2 HS6 carburettors, which involves a choke cable pulling on levers linked to the main jets and pulling the jets down to allow a dose of extra fuel to help start a cold engine. I took the choke operating mechanism from a Rover TC2000 HS8 twin carb set-up as this was the easiest to install between the Jaguar XJ6 HS8 carbs, since both set-ups appear to have the same carb centre-to-carb centre distance on their respective intake manifolds (about 8 1/4).
Most of the parts required for this conversion can be obtained from Burlen Ltd:
Burlen Ltd
Spitfire House
Castle Road
Salisbury
Wiltshire
SP1 3SB
Phone: 00 44 (0)1722 412 500
http://sucarb.co.uk/
http://sucarb.co.uk/mediafiles/su/tech_su_23d.jpg
Parts needed:
Qty Description
1 HS8 carb from Jaguar XJ6 Series 1 engine - front - AUD397F
1 HS8 carb from Jaguar XJ6 Series 1 engine - rear - AUD397R
1 Throttle link rod - 3 7/8 (from Jag XJ6)
1 Throttle lever - custom-made with kink to provide clearance for choke link rod
1 Choke link rod length - 3 9/16 (from Rover TC2000) [AUE 168 (4)]
1 Choke lever mechanism - right side of rear carb - AUD3185 (from Rover TC2000)
1 Choke lever mechanism - left side of front carb - AUD???? (from Rover TC2000)
1 Choke lever return spring - right side of rear carb - WZX 1336
1 Choke lever return spring - left side of front carb - WZX 1335
3 Return Spring 3 (Approx Length) - AEC 2075
1 Choke Cable Retaining Nipple & Screw - AUE34
SU Midel Ltd in Australia also have alot of experience in modifying SU carburettors with AED units to manual choke operation. They used to stock a kit that converted Jaguar XJ6 4.2 Series 2 to manual cable operation and dispensing with the AED. The SU Midel manual choke conversion kit number was WZX2000. This kit supplies everything needed to do the modification I have shown in the video with the exception of the dogleg lever, which I had to make. Also, if you are converting anything larger than a Jag Mk 2 2.4 / 240, then you may want to retrofit the 2.4 dashboard-mounted choke slider for finer choke control.
http://www.sumidel.com/
http://issuu.com/fabreaus/docs/cat2
Modifying the AED unit, instead of dispensing with it all together, may be to only viable option for converting to manual choke if you have HIF44 carburettors since the main jets position cannot be altered externally with levers, as on the HS carburettors.
Note:
The standard Jaguar 420 airfilter-to-twin carb intake manifold is better than using twin pancake filters. This is because pancake filters are too restrictive for the large capacity of Jag engines. The standard airfilter manifold provides better combined air flow into the twin carbs. These particular intake manifolds were also used on the Jaguar 240 and 340 Mark 2s.
The standard late-model Mk2 Jaguar 240, 340 and 420 airboxes are extremely restrictive to airflow at about 90mph due to the very narrow opening where the standard paper airfilter mounts. A modern conical K&N airfilter should be fitted in place of the standard Jaguar airboxes and mounted directly to the Jaguar 420 airfilter-to-twin carb intake manifold.
The K&N filter has to be custom-made by the K&N in the USA and shipped to the respective regional distributor.
I used the following dimensions:
Type: ................................Round Tapered Custom Air Filter
Top Material/Finish: ...........Stainless Steel Cap
Flange Inside Diameter - F: 3 7/8
Flange Length - FL: ...........1 7/8
Height - L: .........................8 1/2
Base Outside Diameter: .....6
Top Outside Diameter - D: .3 1/2
Flange Angle - FA: ............Straight
Flange Type: ....................Centered
Flange Offset : .................None
Filter Material : .................Cotton Gauze
http://www.knfilters.co.uk/
http://www.knfilters.co.uk/search/univ2.aspx?id=S0013
https://www.youtube.com/watch?v=QayGk_7Hyo8&list=UUjiJxXT_pMTV5SYQ9VyiNsw Jaguar Mk2 - HS8 SU Carburettors with manual choke](https://i.ytimg.com/vi/vp4GFL1_Gq8/mqdefault.jpg)

