VogMan | BETTER cleaning & curing of 3D resin prints [EASY METHOD] @vogman | Uploaded September 2021 | Updated October 2024, 1 hour ago.
3D resin printing is great, but messy. I often get asked if I have any tips I can share to make cleaning and curing easier and more thorough. So in this video I share the steps I typically follow which hopefully contain a few tips and tricks. 😁
Using a wash and cure machine is certainly appealing, but what about an ultrasonic cleaner. These are considered more efficient by many. Then there's pre-dipping to rinse away the bulk of the resin, and air blasting to achieve much the same.
As you can see, there's more to it than you may think.
🔹 _*MINI AIRBRUSH*_ 🔹
Amazon UK ▶ amzn.to/3kNUUq7
Amazon US ▶ amzn.to/3yBHDpw
Amazon CA ▶ amzn.to/3T1QAnw
🔹 _*SONIC CLEANER*_ 🔹
Amazon UK ▶ amzn.to/3geJaLW
Amazon US ▶ amzn.to/3STmsuc
Amazon CA ▶ amzn.to/3zWKThU
0:00 - Introduction
0:15 - Cleaning 3D resin prints
0:55 - Step 1 Air blasting
1:30 - Step 2 Dunking
2:13 - Step 3 Wash Station
2:34 - Step 4 Support removal
3.22 - Ultrasonic Cleaner
5:37 - Spray rinse
5:52 - Air drying
6:27 - Curing
6:55 - Curing station improvements
🔹 _*OTHER EQUIPMENT & PRODUCTS USED*_ 🔹
There's a lot of equipment mentioned in this video, so to make life easier I’ve made a list with links on my website here vegoilguy.co.uk/equipment.php
🔹 _*ARCHVILLAIN GAMES*_ 🔹
Fantastic miniatures, great giveaways and competitions...
bit.ly/AVGVOG
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 vegoilguy.co.uk/donations 😁
🔹 _*ETSY STORE*_ 🔹
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
▶ etsy.com/uk/shop/VegOilGuy 🛒
🔹 _*MY LINKS*_ 🔹
▶ vogman.co.uk
▶ facebook.com/thevogman
▶ instagram.com/the_vogman
▶ rumble.com/c/c-2100620
▶ vogsmerch.myspreadshop.co.uk
▶ etsy.com/uk/shop/VegOilGuy
▶ patreon.com/vegoilguy
#vogman
#3dprinting
#3dresinprinting
#vegoilguy
#vog
3D resin printing is great, but messy. I often get asked if I have any tips I can share to make cleaning and curing easier and more thorough. So in this video I share the steps I typically follow which hopefully contain a few tips and tricks. 😁
Using a wash and cure machine is certainly appealing, but what about an ultrasonic cleaner. These are considered more efficient by many. Then there's pre-dipping to rinse away the bulk of the resin, and air blasting to achieve much the same.
As you can see, there's more to it than you may think.
🔹 _*MINI AIRBRUSH*_ 🔹
Amazon UK ▶ amzn.to/3kNUUq7
Amazon US ▶ amzn.to/3yBHDpw
Amazon CA ▶ amzn.to/3T1QAnw
🔹 _*SONIC CLEANER*_ 🔹
Amazon UK ▶ amzn.to/3geJaLW
Amazon US ▶ amzn.to/3STmsuc
Amazon CA ▶ amzn.to/3zWKThU
0:00 - Introduction
0:15 - Cleaning 3D resin prints
0:55 - Step 1 Air blasting
1:30 - Step 2 Dunking
2:13 - Step 3 Wash Station
2:34 - Step 4 Support removal
3.22 - Ultrasonic Cleaner
5:37 - Spray rinse
5:52 - Air drying
6:27 - Curing
6:55 - Curing station improvements
🔹 _*OTHER EQUIPMENT & PRODUCTS USED*_ 🔹
There's a lot of equipment mentioned in this video, so to make life easier I’ve made a list with links on my website here vegoilguy.co.uk/equipment.php
🔹 _*ARCHVILLAIN GAMES*_ 🔹
Fantastic miniatures, great giveaways and competitions...
bit.ly/AVGVOG
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 vegoilguy.co.uk/donations 😁
🔹 _*ETSY STORE*_ 🔹
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
▶ etsy.com/uk/shop/VegOilGuy 🛒
🔹 _*MY LINKS*_ 🔹
▶ vogman.co.uk
▶ facebook.com/thevogman
▶ instagram.com/the_vogman
▶ rumble.com/c/c-2100620
▶ vogsmerch.myspreadshop.co.uk
▶ etsy.com/uk/shop/VegOilGuy
▶ patreon.com/vegoilguy
#vogman
#3dprinting
#3dresinprinting
#vegoilguy
#vog
![BETTER cleaning & curing of 3D resin prints [EASY METHOD]](https://i.ytimg.com/vi/kL9TCjtPbw4/hqdefault.jpg "BETTER cleaning & curing of 3D resin prints [EASY METHOD]
3D resin printing is great, but messy. I often get asked if I have any tips I can share to make cleaning and curing easier and more thorough. So in this video I share the steps I typically follow which hopefully contain a few tips and tricks. 😁
Using a wash and cure machine is certainly appealing, but what about an ultrasonic cleaner. These are considered more efficient by many. Then theres pre-dipping to rinse away the bulk of the resin, and air blasting to achieve much the same.
As you can see, theres more to it than you may think.
🔹 _*MINI AIRBRUSH*_ 🔹
Amazon UK ▶ https://amzn.to/3kNUUq7
Amazon US ▶ https://amzn.to/3yBHDpw
Amazon CA ▶ https://amzn.to/3T1QAnw
🔹 _*SONIC CLEANER*_ 🔹
Amazon UK ▶ https://amzn.to/3geJaLW
Amazon US ▶ https://amzn.to/3STmsuc
Amazon CA ▶ https://amzn.to/3zWKThU
0:00 - Introduction
0:15 - Cleaning 3D resin prints
0:55 - Step 1 Air blasting
1:30 - Step 2 Dunking
2:13 - Step 3 Wash Station
2:34 - Step 4 Support removal
3.22 - Ultrasonic Cleaner
5:37 - Spray rinse
5:52 - Air drying
6:27 - Curing
6:55 - Curing station improvements
🔹 _*OTHER EQUIPMENT & PRODUCTS USED*_ 🔹
Theres a lot of equipment mentioned in this video, so to make life easier I’ve made a list with links on my website here https://vegoilguy.co.uk/equipment.php
🔹 _*ARCHVILLAIN GAMES*_ 🔹
Fantastic miniatures, great giveaways and competitions...
http://bit.ly/AVGVOG
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 https://www.patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 https://www.vegoilguy.co.uk/donations 😁
🔹 _*ETSY STORE*_ 🔹
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
▶ https://www.etsy.com/uk/shop/VegOilGuy 🛒
🔹 _*MY LINKS*_ 🔹
▶ http://vogman.co.uk
▶ https://www.facebook.com/thevogman
▶ https://instagram.com/the_vogman
▶ https://rumble.com/c/c-2100620
▶ https://vogsmerch.myspreadshop.co.uk
▶ https://etsy.com/uk/shop/VegOilGuy
▶ https://patreon.com/vegoilguy
#vogman
#3dprinting
#3dresinprinting
#vegoilguy
#vog")
![Elegoo Saturn 2 3D 8K 28 micron Resin Printer [HONEST REVIEW]](https://i.ytimg.com/vi/kqFmf_PqoOg/hqdefault.jpg "Elegoo Saturn 2 3D 8K 28 micron Resin Printer [HONEST REVIEW]
The Elegoo Saturn 2 prints bigger and with an 8K, 28 micron resolution prints finer, but is it as good as its looks suggest? Here I take a close look and the build quality and performance of Elegoo’s latest 3D resin printer and put it through its paces.
With 3d resin printers getting larger, Elegoo sets out here to prove that quality isnt left behind. Possibly the most impressive printer weve seen from Elegoo so far, the Saturn 2 is bigger in more ways than one.
🔹 _*ELEGOO SATURN 8K*_ 🔹
Elegoo EU ▶ https://tinyurl.com/5fnem3z3
Elegoo US ▶ https://tinyurl.com/477cyhu6
Elegoo CA ▶ https://tinyurl.com/2s83bc8a
Elegoo AU ▶ https://tinyurl.com/2bh9h27c
Amazon UK ▶ https://amzn.to/3SmqYl7
Amazon US ▶ https://amzn.to/3Sp1Ha1
Amazon CA ▶ https://amzn.to/3Ew3LXZ
Amazon DE ▶ https://amzn.to/3Z9s2uY
Amazon FR ▶ https://amzn.to/3IrDhIk
Amazon IT ▶ https://amzn.to/41gY7mr
Amazon ES ▶ https://amzn.to/3lXzrz8
══════════════════════════════════════════
💚 *V O G M A N S P I C K S* 💚
_*Best Budget printer*_ ▶ https://tinyurl.com/52ku5vdb
_*Best DLP printer*_ ▶ https://tinyurl.com/43zp5648
_*Best Standard printers*_ ▶ https://tinyurl.com/mr37js37
_*Best Midrange printers*_ ▶ https://tinyurl.com/3wwkemnk
_*Best Large printers*_ ▶ https://tinyurl.com/2p8epxc8
_*Best Resins*_ ▶ https://tinyurl.com/2vp5kcvz
══════════════════════════════════════════
🔹 _*WHAM BAM SLAP MAT*_ 🔹
Personally Im impressed with this Slap Mat. It keeps my workspace free of mess and makes clean-up easier.
▶ https://bit.ly/3xC763J
🔹 _*ARCHVILLAIN GAMES*_ 🔹
Fantastic miniatures, great giveaways and competitions...
▶ http://bit.ly/AVGVOG
0:00 - Introduction
1:10 - Connectivity
1:23 - Resin tray
1:46 - 8K screen
2:12 - Air purifier
3:19 - Z arm
3:27 - Build plate
3:56 - Levelling
4:09 - Print volume
4:18 - User interface
4:29 - Resin
4:56 - Slap mat
5:22 - Prints
6:35 - My thoughts
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 https://www.patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 https://www.vegoilguy.co.uk/donations 😁
🔹 _*LINKS*_ 🔹
https://vegoilguy.co.uk
https://instagram.com/vegoilguy
https://facebook.com/groups/vegoilguy
https://etsy.com/uk/shop/VegOilGuy
https://patreon.com/vegoilguy
🔹 _*DISCLAIMER*_ 🔹
This product was given to me, free of charge and without obligation. No money has changed hands and the only agreement made was that I video an INDEPENDENT review, expressing my own personal and above all honest thoughts on the product.
🔹 _*EQUIPMENT & PRODUCTS USED*_ 🔹
I often get asked where I buy my investment powder, what type of oven do I use, etc, so to make life easy I’ve made a list with links on my website here http://vegoilguy.co.uk/equipment.php
#3dprinting #3dprinter #resinprinting #vegoilguy #vog")
