Uploaded January 2013 | Updated November 2026, 2 days ago
For further reading about Shear Force and Bending Moment Diagram, Please click on the link given below ....
vedupro.blogspot.in/2013/02/shear-force-and-bending-moment-diagram.html
BENDING OF BEAMS
Introduction: Whenever a beam subjected to the external transverse loading, the beam is bent. The stress induced in beam to resist bending moment is called as bending stress.
PURE BENDING OF A BEAM
When the beam is subjected to a constant bending moment no shear stresses are included in that portion of beam, this portion of beam is subjected to pure bending or simple bending.
THEORY OF BENDING ASSUMPTIONS
The following assumptions are made in theory of bending:
The material of beam is homogeneous and isotropic.
The beam is straight before loading.
The beam is of uniform cross-section throughout its length.
Transverse sections, which are plane before loading, remains plane even after loading.
The material is elastic and Hook's Law is applicable.
The modulus of elasticity, E has same value in tension and compression.
For further reading about Shear Force and Bending Moment Diagram, Please click on the link given below ....
vedupro.blogspot.in/2013/02/shear-force-and-bending-moment-diagram.html
BENDING OF BEAMS
Introduction: Whenever a beam subjected to the external transverse loading, the beam is bent. The stress induced in beam to resist bending moment is called as bending stress.
PURE BENDING OF A BEAM
When the beam is subjected to a constant bending moment no shear stresses are included in that portion of beam, this portion of beam is subjected to pure bending or simple bending.
THEORY OF BENDING ASSUMPTIONS
The following assumptions are made in theory of bending:
The material of beam is homogeneous and isotropic.
The beam is straight before loading.
The beam is of uniform cross-section throughout its length.
Transverse sections, which are plane before loading, remains plane even after loading.
The material is elastic and Hook's Law is applicable.
The modulus of elasticity, E has same value in tension and compression.










