Uploaded September 2026 | Updated November 2026, 3 hours ago
Insulating your walls might be the best money you'll ever spend on an old house. Which? reckon insulating solid walls saves between Β£150 and Β£550 a year on heating. But internal wall insulation is also the job that goes wrong most often, and when it fails, it fails silently, behind the boards where nobody can see it.
In this video we look at what internal wall insulation actually is, how it works, the three main systems on the market, and how to work out which one suits your building.
π Download the free guide:
go.skill-builder.uk/iwi-guide
Thanks to Ezy Fit Insulation Systems for supporting this video.
go.skill-builder.uk/ezy-fit
KEY TAKEAWAYS
- Your home needs to be watertight and free from damp before any internal wall insulation goes on the wall. Insulation doesn't fix leaking gutters, cracked render, rising damp or poor ventilation. It buries them, and the problem carries on out of sight.
- Vapour-closed phenolic gives you the best thermal performance for the least thickness, so it's the one to look at where space is tight. It works by keeping moisture out completely, which means the detailing has to be spot on. Miss a joint, a socket or a reveal and you've built a problem into the wall.
- Vapour open fire-rated systems work with the wall instead of sealing it. Moisture can move and the wall has a chance to dry, which suits older solid walls that were built to breathe. You lose a bit more room, but the system is considerably more forgiving.
- Natural systems using hemp or wood fibre take that further, with lower embodied carbon and a good match for traditional buildings and restoration work. Natural doesn't mean foolproof though, and fitted badly onto a damp wall it fails like anything else.
- The weak points are almost never the middle of the board. They're the joints, sockets, corners, window reveals and the floor and ceiling junctions, which is anywhere warm moist air can find its way through to a cold surface.
- Insulating a room changes how the building handles moisture, so the ventilation has to be looked at too. A tighter room with the same moisture load and nowhere for it to go is how you end up with mould you never had before.
- Almost every failure traces back to the same mistake, which is that nobody assessed the building first. That single step, done properly, prevents most of what goes wrong.
CHAPTERS
00:00 Why insulate your walls
01:15 The problem with solid walls
01:43 What insulation hides
02:28 Interstitial condensation
02:44 The three systems
02:47 1. Vapour closed phenolic
04:13 2. Vapour open fire rated
05:42 3. Vapour open natural
06:50 So which one is best?
07:51 How big this job really is
08:19 How it fails silently
09:03 Next episode and free guide
#InternalWallInsulation #SolidWallInsulation #Insulation #Damp #SkillBuilder
====================
π SUPPORT SB - BECOME A MEMBER
youtube.com/channel/UC9GdB6vG6m6cDAwrTAWXgyg/join
πͺ JOIN OUR NEWSLETTER
skill-builder.uk/signup
π SEE OUR FAVOURITES ON AMAZON
amazon.co.uk/shop/skillbuilder
π§ LISTEN TO OUR PODCAST
blubrry.com/skillbuilder/subscribe
π¬ OUR VIDEO LIBRARY
youtube.com/@SkillBuilder/videos
π SEE EVERYTHING SB ON LINKTREE
https://linktr.ee/skillbuilder
π€ WORK WITH US
skill-builder.uk/media
facebook.com/skillbuilderchannel
tiktok.com/@skillbuilder
instagram.com/skill_builder
(As an Amazon Associate, we earn from qualifying purchases)
====================
OUR FAVOURITE CHARITIES
π· BAND OF BUILDERS
bandofbuilders.org
π‘ THE LIGHTHOUSE CHARITY
lighthousecharity.org
π§ CHARITY WATER
charitywater.org
Insulating your walls might be the best money you'll ever spend on an old house. Which? reckon insulating solid walls saves between Β£150 and Β£550 a year on heating. But internal wall insulation is also the job that goes wrong most often, and when it fails, it fails silently, behind the boards where nobody can see it.
In this video we look at what internal wall insulation actually is, how it works, the three main systems on the market, and how to work out which one suits your building.
π Download the free guide:
go.skill-builder.uk/iwi-guide
Thanks to Ezy Fit Insulation Systems for supporting this video.
go.skill-builder.uk/ezy-fit
KEY TAKEAWAYS
- Your home needs to be watertight and free from damp before any internal wall insulation goes on the wall. Insulation doesn't fix leaking gutters, cracked render, rising damp or poor ventilation. It buries them, and the problem carries on out of sight.
- Vapour-closed phenolic gives you the best thermal performance for the least thickness, so it's the one to look at where space is tight. It works by keeping moisture out completely, which means the detailing has to be spot on. Miss a joint, a socket or a reveal and you've built a problem into the wall.
- Vapour open fire-rated systems work with the wall instead of sealing it. Moisture can move and the wall has a chance to dry, which suits older solid walls that were built to breathe. You lose a bit more room, but the system is considerably more forgiving.
- Natural systems using hemp or wood fibre take that further, with lower embodied carbon and a good match for traditional buildings and restoration work. Natural doesn't mean foolproof though, and fitted badly onto a damp wall it fails like anything else.
- The weak points are almost never the middle of the board. They're the joints, sockets, corners, window reveals and the floor and ceiling junctions, which is anywhere warm moist air can find its way through to a cold surface.
- Insulating a room changes how the building handles moisture, so the ventilation has to be looked at too. A tighter room with the same moisture load and nowhere for it to go is how you end up with mould you never had before.
- Almost every failure traces back to the same mistake, which is that nobody assessed the building first. That single step, done properly, prevents most of what goes wrong.
CHAPTERS
00:00 Why insulate your walls
01:15 The problem with solid walls
01:43 What insulation hides
02:28 Interstitial condensation
02:44 The three systems
02:47 1. Vapour closed phenolic
04:13 2. Vapour open fire rated
05:42 3. Vapour open natural
06:50 So which one is best?
07:51 How big this job really is
08:19 How it fails silently
09:03 Next episode and free guide
#InternalWallInsulation #SolidWallInsulation #Insulation #Damp #SkillBuilder
====================
π SUPPORT SB - BECOME A MEMBER
youtube.com/channel/UC9GdB6vG6m6cDAwrTAWXgyg/join
πͺ JOIN OUR NEWSLETTER
skill-builder.uk/signup
π SEE OUR FAVOURITES ON AMAZON
amazon.co.uk/shop/skillbuilder
π§ LISTEN TO OUR PODCAST
blubrry.com/skillbuilder/subscribe
π¬ OUR VIDEO LIBRARY
youtube.com/@SkillBuilder/videos
π SEE EVERYTHING SB ON LINKTREE
https://linktr.ee/skillbuilder
π€ WORK WITH US
skill-builder.uk/media
facebook.com/skillbuilderchannel
tiktok.com/@skillbuilder
instagram.com/skill_builder
(As an Amazon Associate, we earn from qualifying purchases)
====================
OUR FAVOURITE CHARITIES
π· BAND OF BUILDERS
bandofbuilders.org
π‘ THE LIGHTHOUSE CHARITY
lighthousecharity.org
π§ CHARITY WATER
charitywater.org










