Uploaded October 2026 | Updated November 2026, 3 days ago
Set up your BCH ST2K-DTF printer from the box to your first print on DTF film. Kevin covers ink connections, nozzle checks, Yink Studio, and white-ink care.
Follow the film-support and external-ink setup, fill and charge the tanks, and read all four nozzle-check patterns. If a pattern is incomplete, Kevin demonstrates Park and Prime as a recovery step; skip it when the nozzle check is good. Then install the Epson driver, configure Yink Studio, set up automatic cleaning, and print a first A4 design with a white backing. This lesson stops at printing on film; powdering, curing, and pressing come afterward.
BCH ST2K-DTF printer: bchtechnologies.com/products/bch-st2k-dtf-a4-dtf-printer-with-white-ink
Yink Studio installation and activation guide: bchtechnologies.com/blogs/questions-and-answers/how-to-install-and-configure-yink-studio-for-dtf-printing
Chapters
0:00 Setup overview and nozzle-check preview
0:56 Unbox and position the printer
1:58 Install the front and rear film supports
2:26 Connect the external ink system
3:44 Fill the tanks and charge the ink system
5:29 Print and read the nozzle check
7:13 Park and Prime for an incomplete pattern
10:23 Install the Epson driver and Yink Studio
12:09 Configure automatic white-ink cleaning
13:56 Print the first design on DTF film
14:51 Daily maintenance and white-ink care
16:16 Waste counter and getting help
Join this channel to get access to perks:
youtube.com/channel/UCwjOyyJTec5a5ZznioRSJIw/join
Set up your BCH ST2K-DTF printer from the box to your first print on DTF film. Kevin covers ink connections, nozzle checks, Yink Studio, and white-ink care.
Follow the film-support and external-ink setup, fill and charge the tanks, and read all four nozzle-check patterns. If a pattern is incomplete, Kevin demonstrates Park and Prime as a recovery step; skip it when the nozzle check is good. Then install the Epson driver, configure Yink Studio, set up automatic cleaning, and print a first A4 design with a white backing. This lesson stops at printing on film; powdering, curing, and pressing come afterward.
BCH ST2K-DTF printer: bchtechnologies.com/products/bch-st2k-dtf-a4-dtf-printer-with-white-ink
Yink Studio installation and activation guide: bchtechnologies.com/blogs/questions-and-answers/how-to-install-and-configure-yink-studio-for-dtf-printing
Chapters
0:00 Setup overview and nozzle-check preview
0:56 Unbox and position the printer
1:58 Install the front and rear film supports
2:26 Connect the external ink system
3:44 Fill the tanks and charge the ink system
5:29 Print and read the nozzle check
7:13 Park and Prime for an incomplete pattern
10:23 Install the Epson driver and Yink Studio
12:09 Configure automatic white-ink cleaning
13:56 Print the first design on DTF film
14:51 Daily maintenance and white-ink care
16:16 Waste counter and getting help
Join this channel to get access to perks:
youtube.com/channel/UCwjOyyJTec5a5ZznioRSJIw/join










