Uploaded July 2020 | Updated November 2026, 5 hours ago
Recorded during our trip up with the Argo Cable Car. Despite the hot weather and lack of AC in the cars, it is still one of the best thing to do in Batumi. It takes roughly 15 minutes to go up during which you can watch the city of Batumi from the top. The station at the end of the ride is also a nice place to visit with kids where you can get some ice cream or drink coffee.
For the trip downwards check: youtube.com/watch?v=F-tXcF-IEYo
0:00 Start
0:11 Harbor
3:49 Inside the wagon
7:43 To the peak
13:50 Reached the peak stop
15:35 Restaurant at the peak
Recorded during our trip up with the Argo Cable Car. Despite the hot weather and lack of AC in the cars, it is still one of the best thing to do in Batumi. It takes roughly 15 minutes to go up during which you can watch the city of Batumi from the top. The station at the end of the ride is also a nice place to visit with kids where you can get some ice cream or drink coffee.
For the trip downwards check: youtube.com/watch?v=F-tXcF-IEYo
0:00 Start
0:11 Harbor
3:49 Inside the wagon
7:43 To the peak
13:50 Reached the peak stop
15:35 Restaurant at the peak




![Ground Penetrating Radar (GPR) [Georadar] FDTD Animation #gpr #radar
Finite-difference time-domain (FDTD) animation of a sample ground penetrating radar (GPR) in action. Basically, a transmitting antenna shoots a short electromagnetic pulse (with a central frequency of 600 MHz) into the subsurface where the relative dielectric permittivity is 4. The short pulse is reflected from the air-soil interface and then either the rectangular or circular targets embedded in the subsurface. Then, the scattered signals are recorded by the receiving antenna of the GPR unit. This constitutes a single A-scan for the GPR measurement. Collection of A-scans along a spatial range constitutes the so called B-scans. Depending on the reflectivity of the target and soil properties, the success of GPR detection varies.
For citations, please use the following paper:
M. E. Yavuz, A. E. Fouda, and F. L. Teixeira, GPR signal enhancement using sliding-window space-frequency matrices, Progress In Electromagnetics Research, Vol. 145, 1-10, 2014.
http://www.jpier.org/pier/pier.php?paper=14010105
For B-scan collection animation, check:
https://www.youtube.com/watch?v=wsrpdwtu8EM
Georradar, Георадар, 地中レーダー探査, Bodenradar, Radar à pénétration de sol, Radar penembus tanah, Georadar, Földradar, Bakkepenetrerende radar, Eerdradar, Radar de penetração no solo, رادار قياس الأرض Ground Penetrating Radar (GPR) [Georadar] FDTD Animation #gpr #radar](https://i.ytimg.com/vi/eqfgP4qVK4s/mqdefault.jpg)


![Bent Waveguides [FDTD animation]
Here, we demonstrate the propagation through bent waveguides with different bending radii. The thickness of all waveguides are same and lets denote as d here. Then we have 3 cases where the radius of bending is d, 2d or 3d. With the smaller radius, the leakage from the bending is stronger compared to the other ones.
Bent waveguides are a type of optical waveguide that are used to guide and direct light along a specific path. These waveguides are typically made of a high refractive index material, such as glass or silicon, and are designed to have a specific curvature in order to bend and redirect the light.
One common use case for bent waveguides is in optical fiber communications, where they are used to direct light signals along a specific path through a network of fibers. This allows for the efficient and high-speed transmission of data over long distances.
Bent waveguides are also used in other applications, such as in spectrometers for analyzing the composition of materials, in medical imaging devices for producing high-resolution images of the human body, and in optical sensors for detecting and measuring various physical properties.
#fdtd #waveguide #finitedifferencetimedomain Bent Waveguides [FDTD animation]](https://i.ytimg.com/vi/fkmwxRAQqyY/mqdefault.jpg)


