Uploaded June 2016 | Updated September 2026, 2 hours ago
I DID IT! Finally, Superspeed is now available in Arkham City. This should work for Arkham Origins as well, but would most likely cause Arkham Asylum to crash. So how did I do it? It was actually pretty simple. Using the drawscale code to enlarge the character and make them faster, then shrinking them again with a code that doesn't affect speed. This causes many side effects, including not holding gadgets, climbing above the top of objects, and sometimes being in the ground. Please note that this code is character specific, so the one listed here will ONLY WORK FOR RED ROBIN. If you want Superspeed for any other characters, all you have to do is find their head mesh code and replace the Red Robin head mesh.
Red Robin full code: Set SkeletalMesh'DLC5_Red_Robin.Mesh.DLC5_Red_Robin_Skin_Head' Stretches ((Bone="Bip01_Pelvis",Scale=0.50,Phase=STRETCHPHASE_PreRender))
If any hyphens appear when you copy paste this code into your console, remove them.
For other characters, paste the following in between the two apostrophes after SkeletalMesh.
Nightwing: Nightwing.Mesh.Nightwing_Head_Skin
Year One Batman: DLC10_Year_One.Mesh.DLC10_Year_one_head_skin
Robin: Robin.Mesh.Robin_Head_Skin
Clean Batman: Batman_V3.Mesh.Batman_Head_Skin
That's four presets for you, if you want to do this for another character, you'll have to find their head mesh code.
Now that you have this code ready, you'll need to apply it like a mesh code. Look at the character in Riddler's Revenge first, then apply it several times during the loading screen by pressing F10, Up, Enter, over and over again until the game loads. Once the game loads and you have a tiny version of your character, just paste this into the console: set rpawnplayer drawscale 1.8
Congratulations! You now have Superspeed for whatever character you want!
If you want to go faster, you can change the 0.50 in the stretch code to a smaller number, and the drawscale to a bigger one. Please note this will make it more unstable, and I don't have the exact measurements for the drawscale number, so you'll have to figure it out yourself.
New 52 Flash skin here: youtube.com/watch?v=sYf9GYTy-lo
Part of this discovery goes to CapLagRobin, who gave me the code, and the Red Robin skin for Batman without meshing, since using a mesh and the shrinking code caused the game to crash for me. That doesn't mean it wouldn't work at all, it just didn't the one time I tried it. Go check him out here: youtube.com/channel/UCXrs7DLP0GCrqVF3fLqydZQ
Also credit goes to Tchi6, who is the one who discovered the code in the first place.
If I missed a step or if it doesn't work for you, don't hesitate to let me know.
This will be in the "Specials" playlist because it's a big deal, and it technically ties in with 60,000 views and 240 subs.
Lastly, I leave you with DerpstonPDerp's alternate title suggestion: TheEspio001's Speed Weed
Music is Aurea Carmina from incompetech.com
Thanks to Kevin Macleod
I DID IT! Finally, Superspeed is now available in Arkham City. This should work for Arkham Origins as well, but would most likely cause Arkham Asylum to crash. So how did I do it? It was actually pretty simple. Using the drawscale code to enlarge the character and make them faster, then shrinking them again with a code that doesn't affect speed. This causes many side effects, including not holding gadgets, climbing above the top of objects, and sometimes being in the ground. Please note that this code is character specific, so the one listed here will ONLY WORK FOR RED ROBIN. If you want Superspeed for any other characters, all you have to do is find their head mesh code and replace the Red Robin head mesh.
Red Robin full code: Set SkeletalMesh'DLC5_Red_Robin.Mesh.DLC5_Red_Robin_Skin_Head' Stretches ((Bone="Bip01_Pelvis",Scale=0.50,Phase=STRETCHPHASE_PreRender))
If any hyphens appear when you copy paste this code into your console, remove them.
For other characters, paste the following in between the two apostrophes after SkeletalMesh.
Nightwing: Nightwing.Mesh.Nightwing_Head_Skin
Year One Batman: DLC10_Year_One.Mesh.DLC10_Year_one_head_skin
Robin: Robin.Mesh.Robin_Head_Skin
Clean Batman: Batman_V3.Mesh.Batman_Head_Skin
That's four presets for you, if you want to do this for another character, you'll have to find their head mesh code.
Now that you have this code ready, you'll need to apply it like a mesh code. Look at the character in Riddler's Revenge first, then apply it several times during the loading screen by pressing F10, Up, Enter, over and over again until the game loads. Once the game loads and you have a tiny version of your character, just paste this into the console: set rpawnplayer drawscale 1.8
Congratulations! You now have Superspeed for whatever character you want!
If you want to go faster, you can change the 0.50 in the stretch code to a smaller number, and the drawscale to a bigger one. Please note this will make it more unstable, and I don't have the exact measurements for the drawscale number, so you'll have to figure it out yourself.
New 52 Flash skin here: youtube.com/watch?v=sYf9GYTy-lo
Part of this discovery goes to CapLagRobin, who gave me the code, and the Red Robin skin for Batman without meshing, since using a mesh and the shrinking code caused the game to crash for me. That doesn't mean it wouldn't work at all, it just didn't the one time I tried it. Go check him out here: youtube.com/channel/UCXrs7DLP0GCrqVF3fLqydZQ
Also credit goes to Tchi6, who is the one who discovered the code in the first place.
If I missed a step or if it doesn't work for you, don't hesitate to let me know.
This will be in the "Specials" playlist because it's a big deal, and it technically ties in with 60,000 views and 240 subs.
Lastly, I leave you with DerpstonPDerp's alternate title suggestion: TheEspio001's Speed Weed
Music is Aurea Carmina from incompetech.com
Thanks to Kevin Macleod
